Home
Главная
Aurora
Индукционная Плитка
AU 4472
Инструкция по эксплуатации Страница: 3

Aurora AU 4472 [3/13] Control panel

ENG

Please read this manual carefully before using the product to avoid dam-

age during use. Before switching on the product, make sure that the tech-

nical specications of the product shown on the label correspond to the

parameters of the electric network. Incorrect use can lead to damage of

the product, cause material damage or cause damage to the health of the

user. Use only for household purposes in accordance with this Manual.

The product is not intended for commercial use. Use the product only for

its intended purpose. Do not use the product near the kitchen sink, out-

doors and in rooms with high humidity. Always unplug the product from

the electrical network when it is not in use, as well as before assembly,

disassembly and cleaning. The product must not be unattended while

it is connected to the electric network. Make sure that the power cord

does not touch the sharp edges of furniture and hot surfaces. To avoid

electric shock, do not attempt to disassemble or repair the product by

yourself. When disconnecting the product from the electric network,

do not pull on the power cord, hold the plug. Do not twist or wind the

cord. The product is not designed to be operated by an external timer

or a separate remote control system. The product is not intended for use

by persons with reduced physical, sensory or mental abilities, or if they

have no experience or knowledge, if they are not controlled or instructed

about the use of the device by the person responsible for their safety Do

not allow children to use the product as a toy. Do not use accessories that

are not included in the delivery suite. ATTENTION! Do not allow children

to play with plastic bags or wrapping lm. THREAT OF SUFFOCATION! AT-

TENTION! Do not use this product outdoors. ATTENTION! Be especially

careful if children under 8 years or people with disabilities are close to the

product in use. ATTENTION! Do not use this product near combustible

materials, explosives, or self-igniting gases. Do not install this product

near a gas or electric stove, or other heat sources. Do not expose the

product to direct sunlight. ATTENTION! Do not allow children under

8 years to touch the body, the power cord and the plug of the power

cord while the product is in operation.If the product has been kept for a

while at a temperature below 0ºC, it must be left at room temperature for

at least 2 hours before switching it on. ATTENTION! Do not handle the

power cord and the power cord plug with wet hands. ATTENTION! Un-

plug the product from the electric network every time before cleaning,

and also if you do not use it. When connecting the product to an electrical

network do not use an adapter. ATTENTION! To avoid overloading the

electric network, do not connect the product with other powerful electri-

cal appliances to the same electric network. Do not turn on the cooker

with empty containers. Do not use metal tableware that can scratch work

surface coating. Do not install the product in close proximity to walls and

furniture. Free space around the product should be at least 30-40 cm.

WARNING! PEOPLE HAVING A CARDIOSIMULATOR SHOULD NOT BE

CLOSER THAN THE DISTANCE OF 60 CM FROM THE INDUCTION COOKER

DURING ITS OPERATION. ATTENTION!In order to avoid burns, do not

touch the working surface during cooking and immediately after the pro-

cess is nished. During the appliance operation, the working surface does

not heat up, but it is heated by hot dishes. ATTENTION!Always check the

temperature of the prepared food, especially if it is for children. Do not

serve food to the table immediately after cooking, let it cool slightly rst.

ATTENTION! Place the product on a dry, at level surface, solid enough

to support the weight of the cooker and dishes with food. Do not place

the induction cooker on a carpet or tablecloth, as this may obstruct venti-

lation and cause the product overheat. ATTENTION! Do not allow foreign

items, moisture or insects to enter the ventilation openings. ATTENTION!

Do not block any ventilation openings. ATTENTION! Do not use dishes

made of glass, ceramics, aluminum for cooking. The tableware should be

not less than 12 cm in diameter and have a bottom thickness of 2 to 6

mm. ATTENTION! Do not carry the product while it is operating. ATTEN-

TION! In order to avoid accidents, make sure that there is no paper, cloth

or aluminum foil between the dishes and the working surface. The work

surface can be damaged by any objects falling on it, including kitchen

utensils. The working surface can be scratched by moving cast iron or cast

aluminum dishes, or dishes with a damaged bottom. In order to avoid

causing damage to the working surface, do not allow the liquid to boil.

If you remove the dishes from the working surface during cooking, the

cooker will turn o automatically.ATTENTION! For additional protection

in the power circuit, it is advisable to install a residual current device with

a rated operating current not exceeding 30 mA. To install the device, con-

tact a specialist.

SECURITY MEASURES

Use tableware made of cast iron, steel (enamelled steel), dishes with a ferro-

magnetic bottom, or special dishes for induction cookers. Tableware made of

aluminum, copper, heat-resistant glass and other non-magnetic materials are

not suitable for using on induction cookers. It should be noted that the thick-

er and smoother the bottom, the less electricity will be spent on cooking.

RECOMMENDATIONS ON THE USE OF TABLEWARE

It is recommended to use dishes with a at, even bottom. The di-

ameter of the tableware bottom should correspond to the size of

the heating surface.

TABLEWARE FOR INDUCTION COOKERS

Connect the product to an electric network. Place the dishes suitable for induction cookers in the center of the working surface.

Press the ON/OFF button. If the dishes are suitable, you will hear a sound signal.

OPERATION

BUTTON PRESET

After pressing the On / O button, press the Preset button. This fea-

ture allows you to cook food at a given power. Press the Preset but-

ton, the display will show the cooking power. Use the “-” “+” buttons

to set the required power. Power can be set from 200 to 2000 watts.

ON / OFF BUTTON

Turn the product on and o.

PROGRAM MILK

The display will show 80 °. Cooking time is 00:09 minutes. This program

does not allow to adjust the power and time, it is set automatically.

PROGRAM STEW

The display will show power 1800 and cooking time 01:00. This program

does not allow to adjust the power and time, it is set automatically.

PROGRAM DEEP FRY

The display will show 2000. For Deep Fry you can set 8 power levels

from 200 to 2000. Press the Preset button and use the “-” “+” buttons

to set the desired cooking time from 00:01 to 03:00 hrs.

PROGRAM HOTPOT

The display will show 1300. For the HotPot program use the “-” “+”

buttons to set 8 power levels from 200 to 2000. Press the Preset but-

ton and use the “-” “+” buttons to set the desired cooking time from

00:01 to 03:00 hours.

Upon completion a beep will sound. The display will show -: -. The

product turns o after 1 minute. Attention: If the cookware is not

suitable for the induction cooker, E0 will appear on the display and

beeps will sound. The product turns o after 1 minute.

CONTROL PANEL

Before cleaning, disconnect the appliance from an electric network.

The working surface must be cleaned from dirt after each use. Do

not use sharp objects, abrasive or chemical cleaners. Be sure that

dirt is removed from the ventilation openings. Wipe the appliance

body and working surface with a damp cloth. Do not immerse the

product or power cord in water or any other liquid.

CLEANING AND CARE

Before storage, make sure that the product is disconnected from electric network. Complete all the requirements of the CLEANING AND CARE

section. Keep the product in a dry, cool place and out of the reach of children

STORAGE

This symbol on the product and packaging means that used electrical and electronic products, as well as batteries, should not be disposed of with

household waste. They need to be taken to specialized reception points. For more information on existing waste collection systems, contact your local

authorities. Correct disposal will help to save valuable resources and prevent possible negative impact on human health and the state of the environ-

ment that may result from improper handling of waste.

Aurora AU 4472 [3/13] Control panel

Содержание

Похожие устройства