D-Link DP-313 [10/28] Installing the print server

Installing the Print Server

WARNING: Configuration problems may result if the Print

Server is powered up without first

establishing its network connection. Follow

this procedure to avoid complications at the

configuration stage.

1. Confirm proper operation of each of the printers to be connected to the

Print Server.

2. When you have confirmed proper operation of each printer, switch its

power off.

3. Confirm that your wireless network is operating normally.

4. (a) Ad-Hoc Mode

u Before initiating set-up procedure for the print server make

sure your wireless PCMCIA card on your PC/Notebook is

set to channel 6 with ESS-ID set as ‘default’ in ad-hoc

mode.

u Make sure the DIP switch on the print server is positioned

in the ad-hoc mode.

u Press the Reset button on the print server for three seconds

until the LPT begins to light up initiating the factory reset.

u When factory reset is completed the print server will be set

to default on channel 6 and ESS-ID is set as ‘default’.

Note 1:

When changes are made on the print server’s wireless channel and

ESS-ID it must correspond to the PC/Notebook channel and ESS-ID

for direct wireless communication.

Note 2: