Tp-Link TL-MR3040 [129/241] Wireless settings

TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router

-118-

¾ Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.

)

Note:

1) The WPS function cannot be configured if the Wireless function of the AP is disabled.

Please make sure the Wireless function is enabled before configuring the WPS.If you

change the IP Address of LAN, you must use the new IP Address to login the router.

2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the

DHCP server will change accordingly at the same time，while the Virtual Server and DMZ

Host will not take effect until they are re-configured.

5.6 Wireless

Figure 5-16 Wireless menu

There are five submenus under the Wireless menu (shown in Figure 5-16): W

ireless Settings,

Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics.

Click any of them, and you will be able to configure the corresponding function.

5.6.1 Wireless Settings

Choose menu “Wireless→Wireless Setting”, and then you can configure the basic settings for

the wireless network on this page.