D-Link DVA-G3340S Инструкция по эксплуатации онлайн [17/78] 41892

your computer’s Ethernet adapter when you first

access their network. If you want to later replace the

cloned MAC address with the factory default setting,

type in all zeros - 0:0:0:0:0:0 - and click the Clone

MAC Address button.

MTU

The Maximum Transmission Unit size may be changed

if you want to optimize efficiency for uploading data

through the WAN interface. The default setting (1400

bytes) should be suitable for most users. Some user

may want to adjust the setting to optimize performance

for wireless traffic or when low latency is desired (such

as with Internet gaming). It is highly recommended that

the user research how adjusting the MTU may effect

network traffic for better or worse.

NAT

Network Address Translation may be enabled or

disabled with the pull-down menu. Keep in mind that

disabling NAT allows on a single computer to be used

for Internet access through the Router. NAT is enabled

and disable for the Router on all connections (i.e. Pvc0

– Pvc7) if your Router is set up for multiple virtual

connections.

Firewall

Use this to universally enable or disable the Firewall

and Filter features available in the Router. If you

disable this you will not be able to configure settings in

the Firewall or Filters menus in the Advanced

directory.