D-Link DVA-G3340S Инструкция по эксплуатации онлайн [30/78] 41892

The Router can be

configured to relay DNS

settings from your ISP or

another available service to

workstations on your LAN.

When using DNS relay, the

Router will accept DNS

requests from hosts on the

LAN and forward them to

the ISP’s, or alternative

DNS servers. DNS relay

can use auto discovery or

the DNS IP address can be

manually entered by the

user. Alternatively, you may

also disable the DNS relay

and configure hosts on

your LAN to use DNS

servers directly. Most users

who are using the Router

for DHCP service on the

LAN and are using DNS

servers on the ISP’s

network, will leave DNS

relay enabled

(either auto

discovery or user

configured).

DNS Settings

Home > DNS

Configure DNS Settings

In the DNS Relay Selection pull-down menu, choose to Use Auto Discovery, Use User

Configured or Disable DNS relay.

If you have not been given specific DNS server IP addresses or if the Router is not

pre-configured with DNS server information, select the Auto Discover option for DNS

relay. Auto discovery DNS instructs the Router to automatically obtain the DNS IP

address from the ISP through DHCP. If your WAN connection uses a Static IP address,

auto discovery for DNS cannot be used.

If you have DNS IP addresses provided by your ISP, enter these IP addresses in the

available entry fields for the Preferred DNS Server and the Alternative DNS Server.

If you choose to disable DNS relay, it will be necessary to configure DNS settings for

hosts on the LAN since they will not be depending on the Router to forward the DNS

requests.

When you have configured the DNS settings as desired, click the Apply button.