Gigabyte GA-M52LT-D3P (rev.3.0) [72/88] B installing windows vista

Appendix - 72 -

B. Installing Windows Vista

Step 1:

Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps.

When a screen similar to that below appears (RAID hard drive will not be detected at this stage), select Load

Driver (Figure 3).

Step 2:

Insert the motherboard driver disk (Method A) or the removable storage device such as USB ash drive that

contains the SATA RAID driver (Method B), then specify the location of the driver (Figure 4). Note: For users

using a SATA optical drive, be sure to copy the driver les from the motherboard driver disk to a USB ash

drive before installing Windows Vista (go to the BootDrv\UDA\WinVista folder and save the whole sataraid

folder to the USB ash drive). Then use Method B to load the driver.

Method A:

Insert the motherboard driver disk into your system and browse to the following directory:

BootDrv\UDA\WinVista\sataraid

For Windows Vista 64-bit, browse to BootDrv\UDA\WinVista64\sataraid.

Method B:

Insert the USB ash drive containing the driver les and browse to the sataraid folder.

Figure 3

Figure 4