Home
Главная
IVT
Отбойный Молоток
DBRK-1300
Инструкция по эксплуатации Страница: 10

IVT DBRK-1300 [10/104] Instruction manual

Instruction manual

ATTENTION! DANGER OF ELECTRIC

SHOCK!

Consider working area environment. Do not expose

power tools to rain. Do not use power tools in damp

or wet locations. Keep work area well lit and dry. Try

to prevent the device from getting wet or being

exposed to humidity. Do not leave it outside

overnight. Water entering a power tool will increase

the risk of electric shock.

∙ The power supply cable should be checked

regularly and, before using it, make sure the cable is

not damaged or worn out. If the cable is not in good

condition, do not use the appliance; take it to an

authorized service Center.

∙ When tool is used outdoor, only use an extension

cable that is suitable for outdoor use and which is

marked for this specic use. Keep it away from the

working area, from damp, wet or oily surfaces and away

from heat and ammable materials.

∙ Avoid any accidental starting: make sure that the

power switch (if present) is in the «off» position, before

plugging the tool in.

∙ Remove adjusting keys or wrenches before turning

the tool on.

∙ Do not use the tool if the switch does not turn the

tool on or off. Any tool that cannot be controlled with the

switch is dangerous and must be repaired.

WARNING! During the use of certain

power tools, some dust containing

chemicals known to cause cancer,

may occur.

Some of these chemicals are: lead from lead based paints,

crystalline silica from bricks and cement and other masonry

products, arsenic and chromium from chemically treated

lumber and other dangerous products. If dust is present, your

risk from these exposures varies, depending on how often

you do this type of work. To reduce your exposure to these

chemicals, any time you do pulverulent operations, work

in a well ventilated area and work with approved safety

equipment, such as dust masks that are specially

designed to lter out microscopic particles.

∙ If the appliance strikes a foreign body, examine the

device for signs of damage and carry out any necessary

repairs before restarting and continuing to work.

∙ If the appliance starts to vibrate abnormally, turn

it off and check for the cause immediately. Vibration is

generally a warning of trouble.

∙ Always switch off the appliance and wait until

the device completely stops whenever you leave

the machine, before carrying out maintenance,

before changing accessories, checking, cleaning,

troubleshooting or working on the appliance.

∙ It is forbidden to move or modify any of the internal

parts of the device.

Specic safety rules

∙ Always wear a hard hat (safety helmet), safety

goggles or eye protection when using this tool (ordinary

eye or sun glasses are NOT safety glasses). They

will help deect fragments of the material that may be

thrown toward your face and eyes.

∙ Some material contains chemicals which may be

toxic and dust generated or gases released from the

material you are working on may cause respiratory

difculties. Take caution to prevent dust inhalation and

skin contact. Use a dust mask and thick protective

gloves.

∙ Use thick cushioned gloves and limit the exposure

time by taking frequent rest periods. Vibration caused

by hammer action may be harmful to your hands and

arms.

∙ Wear ear protectors when using the tool. Prolonged

exposure to high intensity noise can cause hearing

loss.

∙ Be sure no one is below when using the tool in high

locations. Be sure no one is hazardously too near to

the working area.

∙ Do not point the tool at any one in the area when

operating. The chisel could y out and injure someone

seriously.

∙ Be sure the chisel is secured in place before

operation.

∙ Under normal operation, the tool is designed to

produce vibration. The screws can come loose easily,

causing a breakdown or accident. Check tightness of

screws carefully before operation.

∙ In cold weather or when the tool has not been used for

a long time, let the tool warm up for a while by operating it

under no load. This will loosen up the lubrication. Without

proper warm-up, hammering operation is difcult.

∙ Hold the tool rmly with both hands.

∙ Use the auxiliary handle supplied with the tool.

Always use both handles for maximum control. Never

attempt to operate this tool with one hand. It develops

intense percussive forces during operation and you may

lose control if attempting one hand operation. Losing

control of the tool can cause injuries.

∙ Hold the tool by the insulated handles when

carrying out work during which the plug-in tool could

strike concealed power cables or its own mains lead.

Contact with a live cable can also make the metal parts

of the equipment live and will cause an electric shock.

∙ Always be sure you have a rm footing.

∙ Position yourself to avoid being caught between the

IVT DBRK-1300 [10/104] Instruction manual

Содержание

Похожие устройства