Digitech VOCALIST LIVE 5 VOCAL [21/44] Comp gate

Digitech VOCALIST LIVE 5 VOCAL [21/44] Comp gate
15
Comp/Gate
The Comp/Gate affects the incoming vocal dynamics. The Comp/Gate can be used
to smooth out a vocal performance by adjusting the output gain of the signal based
on the incoming amplitude of the vocal. The Gate function is useful for removing
background noise from the incoming signal, or for muting the signal when it falls
below a certain threshold. In order to turn the Comp/Gate row off, you need to
turn Type to OFF and Noise Gate to GATE OFF.
Type
cmp off
cmp hard
cmp soft
cmp softer
Turns the compressor off.
Abruptly reduces gain when the input level
rises above the threshold. (Hard knee)
Gently reduces gain when the input level rises
above the threshold. (Soft knee)
Very gently reduces gain when the input level
rises above the threshold. (Softer knee)
Ratio
Cratio x.x
The ratio (x.x) of the change in input level to
the change in output level, measured in decibels
(dB). For example, a 2:1 ratio means that for
every 2 dB the input level changes, the output
level changes 1dB. Range: 1.0 - 5.0
Warning: Using a high compression ratio
increases susceptibility to feedback due to the
higher gain used.
Threshold
Cmp thresh
This parameter determines the input level
of the “knee”. A value of 0 corresponds to 0
dB and a value of 99 corresponds to –40 dB.
Range: 0-99
Attack/
Release
Cmp rate
Controls how quickly the compressor begins
and ends its effect on the signal. Range: 1-9
Noise Gate
Gate off
Gate-xxDb
Turns the gate function off.
The Gate function triggers at –xx decibels.
Range: -80dB to -20dB
Comp/Gate
Эффекты Comp/Gate влияют на динамику входного сигнала. Они используются
для сглаживания вокала путем регулирования выходного усиления сигнала на
основе амплитуды входного сигнала. Функция Gate используется для удаления
фонового шума из входного сигнала или для отключения сигнала, если он
меньше порогового значения. Для отключения эффектов из ряда Comp/Gate
необходимо установить параметр Type на , а Noise Gate на .
Отключение компрессора
Резкое снижение усиления, когда входной
уровень превышает порог (жесткое
подавление)
Плавное снижение усиления, когда
входной уровень превышает порог (мягкое
подавление)
Очень плавное снижение усиления, когда
входной уровень превышает порог (очень
мягкое подавление)
Отношение (х.х) изменения входного
сигнала к изменению выходного сигнала,
в децибелах (дБ). Например, 2:1 означает,
что при изменении входного сигнала на 2 дБ
выходной изменится на 1 дБ. Диапазон: 1.0
– 5.0
Внимание: Высокое отношения компрессии
повышает чувствительность к обратной связи,
так как повышается усиление.
Этот параметр определяет уровень
подавления входного сигнала. Значение
0 соответствует 0 дБ, а значение 99
соответствует -40 дБ. Диапазон: 0-99
Управление скоростью применения и
отключения эффекта сигнала. Диапазон: 1-9
Отключает гейт.
Гейт включается на хх децибел. Диапазон: -80
дБ до -20 дБ.

Содержание

Скачать