Home
Главная
Hotpoint-Ariston
Стиральная Машина
ARTXL 129
Инструкция по эксплуатации Страница: 10

Hotpoint-Ariston ARTXL 129 [10/48] Care and maintenance

Care and maintenance

Cutting off the water or electricity

supply

 Turn off the water tap after every wash. This will

limit the wear of your appliance's water system

and also prevent leaks.

 Unplug your appliance when cleaning it and during

all maintenance operations.

Cleaning your appliance

The exterior and rubber parts of your appliance can

be cleaned with a soft cloth soaked in lukewarm

soapy water. Do not use solvents or abrasives.

Caring for your appliance door and

drum

 Always leave the appliance door ajar to prevent

unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump that does not require any maintenance.

Sometimes, small items (such as coins or buttons)

may fall into the pre-chamber that protects the

pump, situated in the lower part of the same.

 Make sure the wash cycle has ended and unplug

the appliance.

How to clean the detergent dispenser

Cleaning:

Then clean the dispenser under a tap (fig. 3) using an

old toothbrush and, once the pair of siphons inserted in

the top of compartments 1 and 2 (fig. 4) have been pulled

out, check whether the same are not clogged and then

rinse them.

Reassembly:

Do not forget to reinsert the

pair of siphons into the spe-

cial housings and then to

replace the dispenser into

its seat, clicking it into place

(fig. 4, 2 and 1).

Disassembly:

Press lightly on the large

button on the front of the

detergent dispenser and

pull it upwards (fig. 1, 2).

To recover any objects that have fallen into the pre-

chamber:

1. remove the plinth at

the bottom on the front

side of the washing

machine by pulling from

the side with your

hands (see figure);

2. unscrew the lid

rotating it anticlock-

wise (see figure): a little

water may trickle out.

This is perfectly normal;

3. clean the interior

thoroughly;

4. screw the lid back on;

5. reposition the panel,

making sure the hooks

are securely in place

before you push it onto

the appliance.

Checking the water inlet hose

Check the water inlet hose at least once a year. If

you see any cracks, replace it immediately: during the

wash cycles, water pressure is very strong and a

cracked hose could easily split open.

 Never use hoses that have already been used.

Fig. 1 Fig. 2

Fig. 3

Fig. 4

Содержание

Похожие устройства

Care and maintenance GB Cutting off the water or electricity supply To recover any objects that have fallen into the pre chamber Turn off the water tap after every wash This will limit the wear of your appliance s water system and also prevent leaks 1 remove the plinth at the bottom on the front side of the washing machine by pulling from the side with your hands see figure 2 unscrew the lid rotating it anticlock wise see figure a little water may trickle out This is perfectly normal 3 clean the interior thoroughly 4 screw the lid back on 5 reposition the panel making sure the hooks are securely in place before you push it onto the appliance Unplug your appliance when cleaning it and during all maintenance operations Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water Do not use solvents or abrasives Caring for your appliance door and drum Always leave the appliance door ajar to prevent unpleasant odours from forming Cleaning the pump The washing machine is fitted with a self cleaning pump that does not require any maintenance Sometimes small items such as coins or buttons may fall into the pre chamber that protects the pump situated in the lower part of the same Make sure the wash cycle has ended and unplug the appliance Checking the water inlet hose Check the water inlet hose at least once a year If you see any cracks replace it immediately during the wash cycles water pressure is very strong and a cracked hose could easily split open Never use hoses that have already been used How to clean the detergent dispenser Disassembly Cleaning Reassembly Press lightly on the large button on the front of the detergent dispenser and pull it upwards fig 1 2 Then clean the dispenser under a tap fig 3 using an old toothbrush and once the pair of siphons inserted in the top of compartments 1 and 2 fig 4 have been pulled out check whether the same are not clogged and then rinse them Do not forget to reinsert the pair of siphons into the spe cial housings and then to replace the dispenser into its seat clicking it into place fig 4 2 and 1 Fig 1 Fig 2 io Fig 3 Fig 4

Скачать