Hotpoint-Ariston ARTXL 129 [5/48] Il hotpoint

Hotpoint-Ariston ARTXL 129 [5/48] Il hotpoint
GB
5
Function buttons and corresponding indicator lights
When a function is selected, the corresponding
indicator light will illuminate.
If the selected function is not compatible with the
programmed wash cycle, the corresponding indicator
light will flash and the function will not be activated.
If a function which is incompatible with another
function selected previously, only the most recent
selection will remain active.
Lid locked indicator light
If this indicator light is on, the appliance door is locked to
prevent it from being opened accidentally; to avoid any
damage, wait for the indicator light to switch off (it will take
about three minutes) before you open the appliance door.
N.B. If the DELAY TIMER function is activated, the door
cannot be opened; pause the machine by pressing the
START/PAUSE button if you wish to open it.
If the START/PAUSE indicator light (orange) flashes
rapidly at the same time as the function indicator
light, this indicates a problem has occurred (see
Troubleshooting).
How to open and to close the drum
Wash
Rinse
Spin
Drain
End of wash cycle
Fig. 1
Fig. 2
Fig. 3
Fig. 4
A) Opening (Fig. 1):
Lift the external lid and open it completely.
B) Opening the drum (Soft opening):
With one finger, push the button indicated in fig. 2
and the drum will open delicately.
C) Loading the washing machine (Fig. 3).
D) Shutting (Fig. 4):
- close the drum fully by first shutting the front
door followed by the rear one;
- then ensure the hooks on the front door are
perfectly housed within the seat of the rear door;
- after the hooks have clicked into position, press
both doors lightly downwards to make sure they
do not come loose;
- finally shut the external lid.
Starting a wash cycle
1. Switch the washing machine on by pressing the
ON/OFF button. All indicator lights will switch on for a
few seconds, then they will switch off and the START/
PAUSE indicator light will pulse.
2. Load the laundry, close the door and the lid.
3. Set the WASH CYCLE knob to the desired
programme.
4. Set the washing temperature (see
Personalisation).
5. Set the spin speed (see Personalisation).
6. Measure out the detergent and washing additives
(see Detergents and laundry).
7. Select the desired functions.
8. Start the wash cycle by pressing the START/
PAUSE button and the corresponding indicator light
will remain lit in a fixed manner, in green.
To cancel the set wash cycle, pause the machine by
pressing the START/PAUSE button and select a new
cycle.
9. At the end of the wash cycle the
indicator light
will switch on. The LID LOCKED indicator light will
switch off, indicating that the door may be opened.
Take out your laundry and leave the appliance door
ajar to make sure the drum dries completely.
Switch the washing machine off by pressing the ON/
OFF button.

Содержание

Похожие устройства

il Hotpoint ARISTON A Opening Fig 1 Wash Lift the external lid and open it completely Rinse B Opening the drum Soft opening With one finger push the button indicated in fig 2 and the drum will open delicately Spin Drain C Loading the washing machine Fig 3 End of wash cycle D Shutting Fig 4 Function buttons and corresponding indicator lights When a function is selected the corresponding indicator light will illuminate If the selected function is not compatible with the programmed wash cycle the corresponding indicator light will flash and the function will not be activated If a function which is incompatible with another function selected previously only the most recent selection will remain active close the drum fully by first shutting the front door followed by the rear one then ensure the hooks on the front door are perfectly housed within the seat of the rear door after the hooks have clicked into position press both doors lightly downwards to make sure they do not come loose finally shut the external lid Starting a wash cycle 9 0 Lid locked indicator light If this indicator light is on the appliance door is locked to prevent it from being opened accidentally to avoid any damage wait for the indicator light to switch off it will take about three minutes before you open the appliance door N B If the DELAY TIMER function is activated the door cannot be opened pause the machine by pressing the START PAUSE button if you wish to open it If the START PAUSE indicator light orange flashes rapidly at the same time as the function indicator light this indicates a problem has occurred see Troubleshooting How to open and to close the drum 1 Switch the washing machine on by pressing the ON OFF button All indicator lights will switch on for a few seconds then they will switch off and the START PAUSE indicator light will pulse 2 Load the laundry close the door and the lid 3 Set the WASH CYCLE knob to the desired programme 4 Set the washing temperature see Person alisa tion 5 Set the spin speed see Personalisation 6 Measure out the detergent and washing additives see Detergents and laundry 7 Select the desired functions 8 Start the wash cycle by pressing the START PAUSE button and the corresponding indicator light will remain lit in a fixed manner in green To cancel the set wash cycle pause the machine by pressing the START PAUSE button and select a new cycle 9 At the end of the wash cycle the END indicator light will switch on The LID LOCKED indicator light will switch off indicating that the door may be opened Take out your laundry and leave the appliance door ajar to make sure the drum dries completely Fig 1 Switch the washing machine off by pressing the ON OFF button Fig 3 Fig 4

Скачать