Zanussi FA 622 [18/42] Maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zanussi FA 622 [18/42] Maintenance

Zanussi FA 622 [18/42] Maintenance
18
1. Bodywork
Clean the outside of the machine with warm water
and a neutral, non-abrasive household detergent.
Rinse with clean water and dry with a soft cloth.
Important: do not use methylated spirits, solvents or
similar products to clean the bodywork.
2. Detergent dispenser drawer
After a while, detergents and fabric softeners leave
deposits in the drawer.
Clean the drawer from time to time by rinsing it under
a running tap. To remove the drawer from the
machine, press the button in the rear left-hand
corner.
To facilitate cleaning, the top part of the additive
compartments can be removed.
Detergent can also accumulate inside the drawer
recess: clean it with an old toothbrush. Refit the
drawer after cleaning.
P0038
C0073
R0072
3. Cleaning of the drainage area
The drainage area must be cleaned if the pump has
been blocked with objects such as buttons, safety
pins, coins, etc. , or if lint has built up because
clothes that generate lint have been washed at high
temperatures.
• Pull out the plug from the power socket.
• If necessary, wait until the water has cooled down.
• Open the drainage area door.
• Place a bowl to collect the water.
• Release the emergency emptying hose, place it in
the bowl and remove its cap, when the bowl is full
put the cap back on the emergency emptying hose.
• Empty the bowl. Repeat the procedure until you
have completely emptied the washing machine.
• To continue, unscrew the lid of the diaphragm by
turning it counter clockwise and pull it out.
• Remove the objects such as buttons, coins and the
lint that has been accumulated in the area of the
pump impeller by rotating it.
• Screw the lid of the diaphragm clockwise, be sure
is completely tighten.
• Replace the emergency emptying hose in its initial
position and close the drainage area door.
P1117
P1116
P1115
P1114
Maintenance

Содержание

Похожие устройства

Maintenance 1 Bodywork 3 Cleaning of the drainage area Clean the outside of the machine with warm water and a neutral non abrasive household detergent Rinse with clean water and dry with a soft cloth The drainage area must be cleaned if the pump has been blocked with objects such as buttons safety pins coins etc or if lint has built up because clothes that generate lint have been washed at high temperatures Important do not use methylated spirits solvents or similar products to clean the bodywork Pull out the plug from the power socket If necessary wait until the water has cooled down Open the drainage area door Place a bowl to collect the water Release the emergency emptying hose place it in the bowl and remove its cap when the bowl is full put the cap back on the emergency emptying hose 2 Detergent dispenser drawer After a while detergents and fabric softeners leave deposits in the drawer Clean the drawer from time to time by rinsing it under a running tap To remove the drawer from the machine press the button in the rear left hand corner Empty the bowl Repeat the procedure until you have completely emptied the washing machine To facilitate cleaning the top part of the additive compartments can be removed To continue unscrew the lid of the diaphragm by turning it counter clockwise and pull it out Detergent can also accumulate inside the drawer recess clean it with an old toothbrush Refit the drawer after cleaning Remove the objects such as buttons coins and the lint that has been accumulated in the area of the pump impeller by rotating it Screw the lid of the diaphragm clockwise be sure is completely tighten Replace the emergency emptying hose in its initial position and close the drainage area door 18

Скачать