Zanussi FA 622 [19/42] The water inlet hose filter
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zanussi FA 622 [19/42] The water inlet hose filter

Zanussi FA 622 [19/42] The water inlet hose filter
ENGLISH
19
4. The water inlet hose filter
If it takes longer to fill up the washing machine it is
time to check the water inlet hose filter it may be
clogged.
Turn off the water tap.
Unscrew the fixing nut of the inlet hose.
Remove the filter from the electrovalve and clean it
with a hard bristle brush and replace it.
Screw on the nut thoroughfully.
5. Emergency emptying out
If the water is not discharged (outlet pump is
blocked, filter or drain hose are clogged), proceed as
follows to empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the drainage area door;
• place a bowl to collect the water;
• release the emergency emptying hose, place it in
the bowl and remove its cap, when the bowl is full
put the cap back on the emergency emptying hose;
• empty the bowl, repeat the procedure until you
have completely emptied the washing machine;
• replace the emergency emptying hose in its initial
position and close the drainage area door.
P0090
P0021
6. Frost precautions
If the machine is installed in a place where the
temperature could drop below 0°C, proceed as
follows:
• disconnect the appliance;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the drainage area door;
• place a bowl to collect the water that will flow out;
• release the emergency emptying hose, place it in
the bowl and remove its cap;
• when the water stops flowing out, put the cap back
on the emergency emptying hose, replace the
emergency emptying hose in its initial position and
close the drainage area door.
By doing this, any water remaining in the machine is
removed, avoiding the formation of ice and,
consequently, breakage of the affected parts.
When you use the machine again, make sure that
the ambient temperature is above 0°C.

Содержание

Похожие устройства

6 Frost precautions If it takes longer to fill up the washing machine it is time to check the water inlet hose filter it may be clogged If the machine is installed in a place where the temperature could drop below 0 C proceed as follows Turn off the water tap disconnect the appliance Unscrew the fixing nut of the inlet hose close the water tap Remove the filter from the electrovalve and clean it with a hard bristle brush and replace it if necessary wait until the water has cooled down Screw on the nut thoroughfully place a bowl to collect the water that will flow out open the drainage area door release the emergency emptying hose place it in the bowl and remove its cap when the water stops flowing out put the cap back on the emergency emptying hose replace the emergency emptying hose in its initial position and close the drainage area door By doing this any water remaining in the machine is removed avoiding the formation of ice and consequently breakage of the affected parts When you use the machine again make sure that the ambient temperature is above 0 C 5 Emergency emptying out If the water is not discharged outlet pump is blocked filter or drain hose are clogged proceed as follows to empty out the machine pull out the plug from the power socket close the water tap if necessary wait until the water has cooled down open the drainage area door place a bowl to collect the water release the emergency emptying hose place it in the bowl and remove its cap when the bowl is full put the cap back on the emergency emptying hose empty the bowl repeat the procedure until you have completely emptied the washing machine replace the emergency emptying hose in its initial position and close the drainage area door 19 ENGLISH 4 The water inlet hose filter

Скачать