Verto 52G441 [8/52] Detailed safety regulations

Verto 52G441 [8/52] Detailed safety regulations
8
GWARANCJA I SERWIS
Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service tel. +48 22 573 03 85
Ul. Pograniczna 2/4 fax. +48 22 573 03 83
02-285 Warszawa e-mail service@gtxservice.pl
Sieć Punktów Serwisowych do napraw gwarancyjnych
i pogwarancyjnych dostępna na platformie internetowej
gtxservice.pl
Grupa Topex zapewnia dostępność części zamiennych oraz
materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.
Pełna oferta części i usług na gtxservice.pl. Zeskanuj kod QR i wejdź
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
SUBMERSIBLE PUMP FOR DIRTY WATER
52G441
CAUTION: BEFORE USING THE TOOL READ THIS MANUAL CAREFULLY
AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SAFETY OF USER OF SUBMERSIBLE PUMP FOR DIRTY WATER
Connection to mains network should be done by a licensed
electrician and accordingly to IEC 364. Use of residual current
device is required, which breaks the circuit when earth leakage
current exceeds 30mA for 30 ms.
Do not direct the pump water stream onto people, electric
equipment and the device itself.
Disconnect the pump from power supply when performing
maintenance tasks.
Children are not allowed to operate the pump.
Do not pull or hold the pump by its power cable or water hose. Use
corrosion resistant cord attached directly to the pump handle for
this purpose.
To ensure safe operation use only spare parts that are approved by
the manufacturer or original.
Use connectors and equipment supplied by the manufacturer.
Do not use the pump in case of damage of power cable or any
other part of the device, e.g. residual current device, water hose
etc.
When extension cord is used, socket and plug should use earthing
prong (connection).
The pump is designed for household use.
The pump can be used indoors and outdoors.
Water float must rest freely on water surface, it should not have
contact with obstacles. Blocked movement may cause pump
damage.
The pump is designed so all moving parts and the casing allow
for safe operation. The manufacturer is not responsible for
losses resulting from modifications of the device.
Do not use the pump for liquids other than water, especially
engine fuels, cleaning liquids and other chemical products.
CAUTION! The design is assumed to be safe, protection measures
and additional safety systems are used, nevertheless there is
always a small risk of operational injuries.
CONSTRUCTION AND USE
Submersible water pump is a I protection class device designed for
pumping out clean water or dirty water containing particles with
maximum diameter of 35 mm. The pump is designed to operate
under water. When installed in appropriate well, it may be protection
against flooding. It is ideal for removing water from garages,
basements, tanks or excavations flooded with rain water. The pump
is designed to pump water at maximum temperature 35
0
C.
Special base is specific feature of the pump, it allows to pump out
the water down to 5 cm level. The pump features automated float
switch, which allows the pump to switch on and off by itself. It
protects against dry operation. Built-in vent valve allows easy water
suction.
Use the pump according to the manufacturer’s instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Handle
2. Float switch
3. Inlet holes
4. Connection
GB

Содержание

Скачать