Beurer BM 35 [16/80] Prepare measurement
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Beurer BM 35 [16/80] Prepare measurement

Beurer BM 35 [16/80] Prepare measurement
16
4. Prepare measurement
Inserting battery
•
Remove the battery cover from
the back of the monitor.
•
Insert four AAA 1.5 V alkaline bat-
teries. Making absolutely sure
that you insert them with the cor-
rect polarity as marked. Never use
rechargeable batteries.
•
Replace the battery cover carefully
If the battery change
is continuously illuminated, meas-
urement is no longer possible and you must replace all the bat-
teries. Once batteries have been removed from the device, the
time must be reset.
Used batteries do not belong in the household waste. You are
legally obliged to dispose of the batteries. Dispose of them via
your specialist electrical supplier or local collecting point for
recyclable waste
Note: Batteries containing pollutant substances
are marked as follows: Pb = Battery contains
lead, Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting date, time and language
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time. The time is shown in 24 hour format.
Proceed as follows to set the date and time:
•
Switch on the blood pressure monitor with the button.
•
Press the function key for over 5 seconds .
•
The month starts flashing. Using the + function key, set the
month 1 to 12 and confirm with the function key .
•
Set the day, hour and minute and confirm in each case with
the function key .
•
Confirm your selection with the function key .
5. Measuring blood pressure
Positioning cuff
Fit the cuff round your bare left upper
arm. Blood circulation in the arm
should not be restricted by tight cloth-
ing or other objects.
The cuff should be placed on the
upper arm so that the lower edge is 2
to 3 cm above the bend of the elbow
and above the artery. The tube should
be in line with the centre of the palm.
Now place the free end of the cuff
snugly, but not too tightly, around the
arm, and fix it with the Velcro fastener.
The cuff should be fitted tight enough
to allow just two fingers to fit beneath
the cuff.
Insert the cuff tubing into the socket
for the cuff attachment.
4 x AAA (LR03) 1,5

Содержание

Похожие устройства

Скачать