Beurer HSE 30 [14/80] Operation

Beurer HSE 30 [14/80] Operation
14
6 Operation
Important
Straighten the mains cable [8] if it becomes
twisted.
Do not pull, twist or kink the mains cable
[8]; do not pull or lay it across/on sharp,
pointy objects or hot surfaces.
Do not jam the mains cable [8] e.g. in a
drawer or door.
Warning
Stand on a dry, electrically non-conductive
surface.
Ensure that your hands are dry!
Your hair must be dry!
Depending on the temperature setting and
duration of use, the unit can become very
hot. If the unit is hot, touch it only by its
handle – burn and fire hazard!!
Do not touch the heating plates [1].
Switch the unit off immediately if it is
defective or malfunctioning.
Unlock the straightener's lock [9] by turning
it anti-clockwise.
Press the on/off switch for two seconds [5].
- The unit is shipped with a default
temperature setting for normal hair
(160 °C).
- The warm-up phase is displayed by a
running light in the temperature
display [2].
- When the default temperature or the
selected temperature is reached, this is
displayed by a continuously lit LED in the
temperature display [2].
- After about 30 seconds, the straightener
is ready for use.
Adjusting the temperature
You can increase or decrease the
temperature in 20 °C increments using the
+/– buttons [3, 4].
We recommend the following temperature
settings:
120 °C to 140 °C:
- Fine, fragile, coloured or bleached hair
160 °C to 180 °C:
- Normal hair
200 °C to 220 °C:
- Strong and resistant hair
Note
The higher the selected temperature, the
more quickly you get the desired result.
If you work with the maximum temperature,
do not work on the same strands more than
once.

Содержание

Скачать