Indesit WISL 1000 OT [6/72] Running a wash cycle

Indesit WISL 1000 OT [6/72] Running a wash cycle
6
GB
Running a wash cycle
Note: After installing the machine and before using
it for the first time, run an empty wash cycle using
detergent, setting the
programme and ensuring
the timer knob is in the "auto" position.
1. Switch the washing machine on by pressing
ON/OFF button
. All the LEDS will light up for a
few seconds and the ON-OFF/DOOR LOCK
indicator light
will begin to flash.
2. LOADING LAUNDRY. Open the door. Load the
laundry, making sure that the maximum load
quantity indicated in the table of programmes
(below) is not exceeded.
3. MEASURING OUT DETERGENT/WASHING ADDITIVES
Remove the drawer completely and pour the
detergent into the compartment marked with the
number 2. If required, pour fabric softener and
other additives into the compartment marked with
the number 3. The softener must not rise above
the level of the grille. If you wish to run the
washing programme especially for sportswear
(by setting the timer knob to "auto" or to one of
the positions between "3h and 24h" - see
Detergents and laundry), it is also possible to
use powder detergent in compartment 1 for the
pre-wash phase.
4. CLOSE THE DOOR.
5. SELECT THE WASH FABRIC by turning the
PROGRAMME KNOB right or left until the correct
fabric or the "Rinse" programme is selected.
6. SET THE WASHING END TIME by turning the
TIMER KNOB right or left.
The following settings may be used:
- Positions "30 min - 45 min - 60 min": by
selecting one of these times, the duration of the
programme is set.
- Positions between "3h" and "24h": by selecting
one of these times the user selects the number of
hours after which the programme should finish.
The effective duration of the wash is equivalent to
the "auto" cycle duration (see table of
programmes below), but the machine will delay
the start of the cycle automatically to ensure it
ends within the set time period.
- Whenever it is not necessary to set a specific
time for washing to end, select the "AUTO"
position: the machine automatically controls the
duration of the programme, based on the fabric
selected (see table of programmes below).
Regardless of the position selected for the TIMER
KNOB, the "Rinse"
programme lasts 15
minutes and begins as soon as the START/
CANCEL
button is pressed.
7. START THE PROGRAMME by pressing the
START/CANCEL
button. The "on-off/door lock"
and "programme in progress" indicator lights
will illuminate and remain lit constantly.
During the cycle, the indicator lights provide
information relating to the amount of time
remaining until the end of the programme.
When there are 30, 20 and 10 minutes
respectively remaining until the end of the
programme, the corresponding indicator lights will
illuminate.
8. PROGRAMME END
At the end of the wash programme, all the
indicator lights will switch off. Wait for the door to
become unlocked (the "on-off/door lock"
indicator light flashes), remove the laundry and
leave the door ajar in order to let the drum dry
out. Switch off the machine by pressing the ON/
OFF
button.
1
2
3

Содержание

Running a wash cycle Note After installing the machine and before using it for the first time run an empty wash cycle using detergent setting the Q programme and ensuring the timer knob is in the auto position Whenever it is not necessary to set a specific time for washing to end select the AUTO position the machine automatically controls the duration of the programme based on the fabric selected see table of programmes below 1 Switch the washing machine on by pressing ON OFF button I All the LEDS will light up for a few seconds and the ON OFF DOOR LOCK indicator light Q will begin to flash Regardless of the position selected for the TIMER KNOB the Rinse programme lasts 15 minutes and begins as soon as the START CANCEL button is pressed 2 LOADING LAUNDRY Open the door Load the laundry making sure that the maximum load quantity indicated in the table of programmes below is not exceeded 3 MEASURING OUT DETERGENT WASHING ADDITIVES Remove the drawer completely and pour the detergent into the compartment marked with the number 2 If required pour fabric softener and other additives into the compartment marked with the number 3 The softener must not rise above the level of the grille If you wish to run the washing programme especially for sportswear by setting the timer knob to auto or to one of the positions between 3h and 24h see Detergents and laundry it is also possible to use powder detergent in compartment 1 for the pre wash phase 7 START THE PROGRAMME by pressing the START CANCEL j button The on off door lock Q and programme in progress indicator lights will illuminate and remain lit constantly o 20 mm oX During the cycle the indicator lights provide information relating to the amount of time remaining until the end of the programme When there are 30 20 and 10 minutes respectively remaining until the end of the programme the corresponding indicator lights will illuminate 20 mln O nS 4 CLOSE THE DOOR 5 SELECT THE WASH FABRIC by turning the PROGRAMME KNOB right or left until the correct fabric or the Rinse programme is selected 6 SET THE WASHING END TIME by turning the TIMER KNOB right or left The following settings may be used Positions 30 min 45 min 60 min by selecting one of these times the duration of the programme is set Positions between 3h and 24h by selecting one of these times the user selects the number of hours after which the programme should finish The effective duration of the wash is equivalent to the auto cycle duration see table of programmes below but the machine will delay the start of the cycle automatically to ensure it ends within the set time period 6 8 PROGRAMME END At the end of the wash programme all the indicator lights will switch off Wait for the door to become unlocked the on off door lock Q indicator light flashes remove the laundry and leave the door ajar in order to let the drum dry out Switch off the machine by pressing the ON OFF Q button