Stanley STBS720-B9 [5/56] Additional safety instructions for sanders
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stanley STBS720-B9 [5/56] Additional safety instructions for sanders

Stanley STBS720-B9 [5/56] Additional safety instructions for sanders
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
• Hold power tool by insulated gripping surfaces
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
• Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body leaves it unstable
and may lead to loss of control.
Warning! Take special care when sanding some
woods (e.g. beech, oak) and metal which may
produce toxic dust. Wear a dust mask specifically
designed for protection against toxic dust and fumes and
ensure that persons within or entering the work area are
also protected.
Additional Safety Instructions For Sanders
Sanding
Lead Base Paint
Sanding of lead based paint is NOT RECOMMENDED due
to the difficulty of controlling the contaminated dust. The
greatest danger of lead poisoning is to children and pregnant
women. Since it is difficult to identify whether or not a paint
contains lead without a chemical analysis, we recommend
the following precautions when sanding any paint:
Personal Safety
• No children or pregnant women should enter the work
area where the paint sanding is being done until all clean
up is completed.
• A dust mask or respirator should be worn by all persons
entering the work area. The filter should be replaced
daily or whenever the wearer has difficulty breathing.
Note: Only those dust masks suitable for working with lead
paint dust and fumes should be used. Ordinary painting
masks do not offer this protection. See your local hardware
dealer for the proper (NIOSH approved) mask.
• NO EATING, DRINKING or SMOKING should be done
in the work area to prevent ingesting contaminated paint
particles. Workers should wash and clean up BEFORE
eating, drinking or smoking. Articles of food, drink, or
smoking should not be left in the work area where dust
would settle on them.
Environmental Safety
• Paint should be removed in such a manner as to
minimize the amount of dust generated.
• Areas where paint removal is occurring should be sealed
with plastic sheeting of 4 mils thickness.
• Sanding should be done in a manner to reduce tracking
of paint dust outside the work area.
Cleaning And Disposal
• All surfaces in the work area should be vacuumed and
thoroughly cleaned daily for the duration of the sanding
project. Vacuum filter bags should be changed
frequently.
• Plastic drop cloths should be gathered up and disposed
of along with any dust chips or other removal debris.
They should be placed in sealed refuse receptacles and
disposed of through regular trash pick-up procedures.
During clean up, children and pregnant women should be
kept away from the immediate work area.
• All toys, washable furniture and utensils used by children
should be washed thoroughly before being used again.
5
(Original instructions) ENGLISH

Содержание

Похожие устройства

Original instructions ENGLISH 4 Power tool use and care a Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and saferat the rate for which it was designed b Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired c Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tools operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Additional Safety Instructions For Sanders Sanding Lead Base Paint Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling the contaminated dust The greatest danger of lead poisoning is to children and pregnant women Since it is difficult to identify whether or not a paint contains lead without a chemical analysis we recommend the following precautions when sanding any paint Personal Safety No children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed A dust mask or respirator should be worn by all persons entering the work area The filter should be replaced daily or whenever the wearer has difficulty breathing Note Only those dust masks suitable for working with lead paint dust and fumes should be used Ordinary painting masks do not offer this protection See your local hardware dealer for the proper NIOSH approved mask f Keep cutting tools sharp and clean Property maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control NO EATING DRINKING or SMOKING should be done in the work area to prevent ingesting contaminated paint particles Workers should wash and clean up BEFORE eating drinking or smoking Articles of food drink or smoking should not be left in the work area where dust would settle on them 5 Service Environmental Safety a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained Paint should be removed in such a manner as to minimize the amount of dust generated Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord Cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock Sanding should be done in a manner to reduce tracking of paint dust outside the work area Use clamps or another practical way to secure and support the workpiece to a stable platform Holding the work by hand or against your body leaves it unstable and may lead to loss of control Warning Take special care when sanding some woods e g beech oak and metal which may produce toxic dust Wear a dust mask specifically designed for protection against toxic dust and fumes and ensure that persons within or entering the work area are also protected Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils thickness Cleaning And Disposal All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding project Vacuum filter bags should be changed frequently Plastic drop cloths should be gathered up and disposed of along with any dust chips or other removal debris They should be placed in sealed refuse receptacles and disposed of through regular trash pick up procedures During clean up children and pregnant women should be kept away from the immediate work area All toys washable furniture and utensils used by children should be washed thoroughly before being used again

Скачать