Stanley STBS720-B9 [8/56] Accessories
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stanley STBS720-B9 [8/56] Accessories

Stanley STBS720-B9 [8/56] Accessories
8
Operation
Using your belt sander (FIG. I)
Always hold belt sander firmly with both hands while sanding
as shown in FIG. I.
Note: that sander bail handle can be adjusted to three
different positions as previously discussed.
Switch (FIG. J and K)
To start your belt sander, depress the on/off switch as
shown in FIG. J. To stop your belt sander release the on/ off
switch.
For continuous operation, depress the on/off switch then
depress the lock-on button (FIG. K) and release the on/off
switch. To stop your belt sander, depress the on/off switch to
release the lock-on button. Release the on/off switch.
Handy Hints
• Always start your belt sander before it is in contact with
the workpiece and do not switch it off until after it has
been lifted from the workpiece.
• Always hold your belt sander with two hands.
• Where possible, clamp the workpiece to a work bench or
similar sturdy surface.
• Use the correct grit sanding belt for your application.
The following is a suggested list of belt grits to use with
different materials.
Material Belt Grit
Solid Wood 80
Veneer 150
Chipboard 60/80
Plastics 100
Steel 80 (remove dust bag)
Paint Removal 40/60
Balsa Wood 100
Acrylic 100
Tool Care And Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Never apply excessive force when you use your belt sander.
Too much force can result in an overload and cause damage
to the motor or the workpiece. If your belt sander becomes
too hot, operate it without load for 2 minutes. Always keep
the air cooling vents clear. To clean your belt sander,
proceed as follows:
Warning! To prevent accidental operation, turn
off and unplug sander before performing the
following operations. Failure to do this could
result in serious personal injury.
• Use a clean dry paint brush to clear vents and ducts.
• Clean the housings using a clean damp cloth (do not
use solvents, gas or turpentine.)
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized
service centers or other qualified service personnel, always
using identical replacement parts.
Accessories
The performance of your tool depends on the accessory
used. STANLEY accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Use only 3” x 21” (76 x 533mm) sanding belts.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Notes
• STANLEY's policy is one of continuous improvement to
our products and, as such, we reserve the right to
change product specifications without prior notice.
• Standard equipment and accessories may vary by
country.
• Product specifications may differ by country.
• Complete product range may not be available in all
countries.
• Contact your local STANLEY dealers for range
availability.
ENGLISH (Original instructions)

Содержание

Похожие устройства

ENGLISH Original instructions Operation Never apply excessive force when you use your belt sander Too much force can result in an overload and cause damage Using your belt sander FIG I to the motor or the workpiece If your belt sander becomes Always hold belt sander firmly with both hands while sanding as shown in FIG I Note that sander bail handle can be adjusted to three different positions as previously discussed too hot operate it without load for 2 minutes Always keep the air cooling vents clear To clean your belt sander proceed as follows A Warning To prevent accidental operation turn off and unplug sander before performing the Switch FIG J and K To start your belt sander depress the on off switch as shown in FIG J To stop your belt sander release the on off switch For continuous operation depress the on off switch then depress the lock on button FIG K and release the on off switch To stop your belt sander depress the on off switch to release the lock on button Release the on off switch following operations Failure to do this could result in serious personal injury Use a clean dry paint brush to clear vents and ducts Clean the housings using a clean damp cloth do not use solvents gas or turpentine yj Important To assure product SAFETY and RELIABILITY repairs maintenance and adjustment should be performed by authorized Handy Hints Always start your belt sander before it is in contact with the workpiece and do not switch it off until after it has been lifted from the workpiece Always hold your belt sander with two hands Where possible clamp the workpiece to a work bench or similar sturdy surface service centers or other qualified service personnel always using identical replacement parts Accessories The performance of your tool depends on the accessory used STANLEY accessories are engineered to high quality standards and designed to enhance the performance of your Use the correct grit sanding belt for your application The following isa suggested list of belt grits to use with different materials tool By using these accessories you will get the very best from your tool Use only 3 x 21 76 x 533mm sanding belts Material Belt Grit Solid Wood 80 Veneer 150 Chipboard 60 80 Plastics 100 Steel 80 remove dust bag Paint Removal 40 60 Balsa Wood 100 Acrylic 100 Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center Notes STANLEY S policy is one of continuous improvement to our products and as such we reserve the right to change product specifications without prior notice Standard equipmentand accessories may vary by country Product specifications may differ by country Tool Care And Maintenance Complete product range may not be available in all Your tool has been designed to operate over a long period of time with a minimum of maintenance Continuous satisfactory operation depends upon proper tool care and regular cleaning countries Contact your local STANLEY dealers for range availability

Скачать