Ricoh Aficio SP C811DN Инструкция по эксплуатации онлайн [239/384] 58897

The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on

the Ethernet interface.

msh> ifconfig ether inet6 2001:DB8::100 64

Netmask configuration

msh> ifconfig "interface_name" netmask "address"

The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface.

msh> ifconfig ether netmask 255.255.255.0

Broadcast address configuration

msh> ifconfig "interface_name" broadcast "address"

Changing the Interface

msh> ifconfig "interface" up

You can specify either the Ethernet interface or IEEE 802.11b interface when using the optional IEEE

802.11b interface unit is installed.

• To get the above addresses, contact your administrator.

• Use the default configuration if you cannot obtain setting addresses.

• The IP address, subnet mask and broadcast address are the same as that for the ethernet interface

and IEEE 802.11b interface.

• TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface. If interfaces are

changed, the new interface inherits the configuration.

• Use "0x" as the initial two letters of a hexadecimal address.

info

Use the "info" command to display printer information such as paper tray, output tray, and printer language.

Printer information display

msh> info

• For details about displayed contents, see p.260 "Getting Printer Information over the Network" .

ipp

Use the "ipp" command to view and configure IPP settings.

Remote Maintenance by telnet

237