Grillo CL 62 Инструкция по эксплуатации онлайн [14/56] 520665

CL62/ Translation of the original instructions

Drop in engine performance during cutting

– Speed too high for cutting height – Reduce speed

– Raise cutting height

Uneven cutting

– Cutting deck not parallel to ground – Check tyre pressure

– Blades fault – Check that the blades are correctly mounted

– Sharpen or change the blades

– Check the tension of the deck engine belt

Vibrations during work

– Blades unbalanced – Balance blades or replace them if damaged

– Fastenings are loose – Check and fasten the blade fixing screws as

well as the fixing screws of the engine and

chassis.

THE MACHINE DOES NOT REMAIN IN NEUTRAL

Adjust the device (fig. 11, ref. A) by loosening the counter-nut and acting on the M8 screw.

ENDING WORK

Release the forward lever to stop the machine (fig. 1, no° 1). Put the throttle lever in the STOP position

(fig. 2, ref. A) to switch off the engine.

STORAGE AND PROLONGED PERIODS OF INACTIVITY

Store the mower in a dry place, away from atmospheric agents, and preferably cover it with a sheet.

Follow the instructions included in the engine manual. If the machine is to be out of use for more than 30

days, drain the fuel from the engine to prevent sticky deposits from occurring in the fuel intake system or

in vital parts of carburettor. To avoid this procedure, it is possible to save fuel in storage up to 12 months

by using an appropriate fuel stabilizer. Add this additive to the fuel in the tank or in the fuel container.

Run the engine for a while to let the stabilizer get into the fuel system. Caution: if the engine is fed with

petrol containing alcohol, drain the fuel tank and run the engine until there is no fuel left.

TRANSPORTING THE MACHINE

If the machine has to be transported on a lorry or a trailer, lower the mower deck, engage the parking

brake and fasten the machine to the vehicle using ropes or cables.