Ariston BCS 313 V [3/24] Installation

Ariston BCS 313 V [3/24] Installation
1
GB
7. Never clean or perform maintenance on the appliance
without first removing the plug from the socket; in fact,
turning the knob for adjusting the temperature to the "0
setting is not sufficient to eliminate all electrical contact with
the mains.
8. Before having your old refrigerator picked up for disposal,
remove or make inoperable any locking devices to prevent chil-
dren who might play in or around the appliance from being
locked inside.
9. Before calling for service/assistance in the case of malfunc-
tion, consult the chapter entitled “Is There a Problem? to de-
termine whether it is possible to eliminate the problem. do not
try to repair the problem by trying to access the internal com-
ponents of the appliance.
10. If damaged, the power supply cord on this appliance
must necessarily be replaced by our service centre because
special tools are required for replacement.
11. Do not use electric appliances inside the compartment for
food storage, if these are not those recommended by the
manufacturer.
12. At the end of the functional life of your appliance –
containing cyclopentane gas in the insulation foam and perhaps
gas R600a (isobutane) in the refrigeration circuit – the latter
should made safe before being sent to the dump.
For this operation, please contact your dealer or the Local
Organisation in charge of waste disposal.
ATTENTION
Read your manual carefully since it contains instructions
which will ensure safe installation, use and maintenance of
your appliance.
Your Refrigerator is built to International safety standards
(EN60) and has been awarded the European approval mark
(IMQ) for compliance with UK electrical safety requirements.
It also meets the EC standards on the prevention and elimi-
nation of radio interference (EC directive 87/308 - 02.06.89).
1. This appliance must not be installed outdoors - not even in
an area protected by a roof. It is extremely dangerous to leave
it exposed to rain or storms.
2. It must only be used by adults and exclusively to refrigerate
and freeze foodstuffs, following the instructions for use con-
tained in this manual.
3. Do not ever touch or handle the appliance with bare feet or
with wet hands or feet.
4. It is highly recommended that you do not use extension
cords or multiple socket adapters. If the refrigerator is installed
between cabinets, make sure that the cord is not bent or dan-
gerously pinched or compressed.
5. Never pull on the cord or the refrigerator to remove the
plug from the wall socket - this is very dangerous.
6. Never touch the cooling components within the appliance,
especially with wet hands because this could result in injury.
Never put ice cubes just removed from the freezer into your
mouth because they could stick to your mouth and cause burns.
Safety - a good habit to get into.
Installation
To ensure that the appliance operates properly and to
reduce energy consumption, it is important that the
appliance is installed correctly.
Ventilation
The compressor and condenser generate heat and, there-
fore, need to be ventilated properly. Rooms with less than
perfect ventilation are not very suited for installation of the
appliance. Therefore, it should be installed in a room with
an opening (window or French window) that provide the
appropriate amount of air re-circulation. It is also important
that the room not be too humid.
Away from Heat
This appliance should not be positioned in a place where it is
directly exposed to sunlight or directly next to an iven/hob.
Electrical Connection and Earthing
Before proceeding with the electrical connection, make sure
that the voltage indicated on the rating plate, located at the
bottom left near the vegetable crisper, corresponds to the
mains voltage in your home and that the socket is fitted
with a standard earthing wire in accordance with safety
standards for 46/90 systems. If the socket is not fitted with
an earthing wire, the manufacturer will not be held liability
for any damages and or injuries arising out of the use of the
appliance. Do not use multiple sockets or adapters.
Position the appliance in such a way that you can access
the socket where it is plugged in.
Insufficient power?
The electrical socket must be able to handle the maximum
power load of the appliance, which is indicated on the rat-
ing plate located at the bottom left next to the vegetable
crisper.
Before making the electrical connection ...
After the appliance has been delivered, place it in the verti-
cal upright position and wait at least 3 hours before insert-
ing the plug into the socket in order to ensure that it func-
tions properly.

Содержание

Safety a good habit to get into ATTENTION Fbad your manual carefully since it contains instructions which will ensure safe installation use and maintenance of your appliance Your Refrigerator is built to International safety standards EN60 and has been awarded the European approval mark IMQ for compliance with UK electrical safety requirem ents It also meets the EC standards on the prevention and elimi nation of radio interference EC directive 87 308 02 06 89 1 This appliance must not be installed outdoors not even in an area protected by a roof It is extremely dangerous to leave it exposed to rain or storms 2 It must only be used by adultsand exclusively to refrigerate and freeze foodstuffs following the instructions for use con tained in this manual 3 Do not ever touch or handlethe appliance with barefeet or with wet hands or feet 4 It is highly recommended that you do not use extension cordsor multiple socket adapters If the refrigerator is installed between cabinets make sure that the cord is not bent or dan gerously pinched or compressed 5 Never pull on the cord or the refrigerator to remove the plug from the wall socket this is very dangerous 6 Never touch the cooling components within the appliance especially with wet hands because this could result in injury Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and cause burns 7 Never clean or perform maintenance on the appliance without first removing the plug from the socket in fact turning the knob for adjusting the temperature to the 0 setting is not sufficient to eliminate all electrical contact with the mains 8 Before having your old refrigerator picked up for disposal remove or make inoperable any locking devicesto prevent chil dren who might play in or around the appliance from being locked inside 9 Before calling for service assistance in the case of malfunc tion consult the chapter entitled Is There a Problem to de termine whether it is possible to éliminât et he problem do not try to repair the problem by trying to access the internal com ponents of the appliance 10 If damaged the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement 11 Do not use electric appliances inside the compartment for food storage if these are not those recommended by the manufacturer 12 At the end of the functional life of your appliance containing cydopentanegasin the insulation foam and perhaps gas R600a isobutane in the refrigeration drcuit the latter should made safe before being sent to the dump For this operation please contact your dealer or the Local Organisation in charge of waste disposal Installation To ensure that the appliance operates properly and to reduce energy consumption it is important that the appliance is installed correctly Ventilation The compressor and condenser generate heat and there fore need to be ventilated properly Rooms with less than perfect ventilation are not very suited for installation of the appliance Therefore it should be installed in a room with an opening window or French window that provide the appropriate amount of air re circulation It is also important that the room not be too humid Away from Heat This appliance should not be positioned in aplacewhereit is directly exposed to sunlight or directly next to an iven hob an earthing wire the manufacturer will not be held liability for any damagesand or injuries arising out of the use of the appliance Do not use multiple sockets or adapters Position the appliance in such a w ay that you can access the socket where it isplugged in Insufficient power The electrical socket must be able to handle the maximum power load of the appliance which is indicated on the rat ing plate located at the bottom left next to the vegetable crisper Before making the electrical connection After the appliance has been delivered place it in the verti cal upright position and wait at least 3 hours before insert ing the plug into the socket in order to ensure that it func tions properly Electrical Connection and Earthing Before proceeding with the electrical connection make sure that the voltage indicated on the rating plate located at the bottom left near the vegetable crisper corresponds to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety standards for 46 90 systems If the socket is not fitted with 1