AXIOMET AX-3004H [5/12] Pre checking

8. Pre-Checking

Before the operation, please check the included accessories; if any are missing, please contact the local

distributor.

Power Cord – 1PC

User Guide – 1PC

Connect with power cord to the unit and to a properly grounded outlet, and switch on AX-3004H.

The unit starts the self-system checking, the LCD displays 0.5s, date of manufacturing, production lot,

model number in turn.

9. Quick Start

OUT Button

Press the OUT button to begin outputting the selected voltage and current. The unit will display the

voltage or current on the screen. Press again OUT button to exit output function.

UP Arrow Key + DOWN Arrow Key

Press UP arrow key to activate the LCD backlit

Press DOWN arrow key to exit the LCD backlit

LEFT Arrow Key + RIGHT Arrow Key

Press LEFT arrow key to decrease the contrast of LCD

Press RIGHT arrow key to increase the contrast of LCD

V/A Key

Press the V/A key to activate voltage measurement and read the voltage value from display.

Push the V/A key again to switch current measurement and read the current value from the display

USB Button

Push the USB button and adjust voltage to 5.2V and the current as 3A to enter USB

power charging mode; then, push the OUT button to output the selected 5.2V at 3A.

Push the USB button again and USB button light out to exit USB power charging mode.

SET Button + V/A Button + Direction Arrow Keys

Push the SET button, and press the direction arrow keys to adjust the voltage value setting, Push the V/A

button to switch to the current value setting, and press the direction arrow keys to measured current value.