AXIOMET AX-3004H [9/12] Current setting

I. It is possible to set voltage values once the outputs are valid. However, for protection of the load,

it is recommended to stop output before voltage setting.

II. Due to the total power limit, current settings will be decreased automatically as

voltage setting increasing.

18. Current Setting

The current setting range is from 0.000A to 3.750A, follow the setting steps as below:

1. Switch on the power supply

2. Push the OUT button to stop the output

3. Push the SET/ENTER button, the max value position flashes of voltage setting area.

4. Push the V/A button, the max. value position of current setting flashes and current setting is activated

5. Push the LEFT or RIGHT arrow keys to move the cursors

6. Push the UP or DOWN arrow keys to change the settings

7. Push SET/ENTER button to exit current setting mode

UP ENTER

OUT �SET �V/A �0. 000 A ---------> 2.000 A ------------ > OK

Remark:

I. It is possible to set current values once the outputs are valid. However, for protection of the load, it is

recommended to stop output before current setting.

19. Output Switch

Under the panel operating mode, push OUT button to shift output status. Once OUT button is on and lit

up, the measured values displayed at LCD; push OUT button again to exit output mode.