Home
Главная
Indesit
Стиральная Машина
WITXL 1251
Руководство пользователя Страница: 2

Indesit WITXL 1251 [2/84] Installation

Installation

! Keep this instruction manual in a safe place for

future reference. Should the appliance be sold,

transferred or moved, make sure the instruction

manual accompanies the washing machine to

inform the new owner as to its operation and

features.

! Read these instructions carefully: they contain

vital information on installation, use and safety.

Unpacking and levelling

Unpacking

1. Unpack the washing machine.

2. Check whether the washing machine has been

damaged during transport. If this is the case, do

not install it and contact your retailer.

3. Remove the four pro-

tective screws and the

rubber washer with the

respective spacer, si-

tuated on the rear of the

appliance (see figure).

4. Seal the gaps using the

plastic plugs provided.

5. Keep all the parts: you

will need them again if

the washing machine

needs to be moved to

another location.

Warning: should the

screws be re-used,

make sure you fasten

the shorter ones at the top.

! Packaging materials are not children’s toys.

Levelling

1. Install the washing machine on a flat sturdy

floor, without resting it up against walls, furniture

cabinets or other.

2. If the floor is not per-

fectly level, compensate

for any unevenness by

tightening or loosening

the adjustable front feet

(see figure); the angle

of inclination, measu-

red according to the

worktop, must not ex-

ceed 2°.

Levelling your appliance

correctly will provide it with stability and avoid any

vibrations, noise and shifting during operation.

If it is placed on a fitted or loose carpet, adjust

the feet in such a way as to allow enough room

for ventilation beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply

pipe by screwing it to

a cold water tab using

a ¾ gas threaded con-

nection (see figure).

Before performing the

connection, allow the

water to run freely until

it is perfectly clear.

2. Connect the other

end of the water inlet

hose to the washing

machine,

screwing it onto the ap-

pliance’s cold water in-

let, situated on the top

right-hand side on the

rear of the appliance

(see figure).

3. Make sure there are no kinks or bends in the

hose.

! The water pressure at the tap must be within

the values indicated in the Technical details

table (on the next page).

! If the water inlet hose is not long enough,

contact a specialist store or an authorised

serviceman.

! Never use hoses that have already been used.

Содержание

Похожие устройства

Installation GB Keep this instruction manual in a safe place for future reference Should the appliance be sold transferred or moved make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features Read these instructions carefully they vital information on installation use and safety contain If it is placed on a fitted or loose carpet adjust the feet in such a way as to allow enough room for ventilation beneath the washing machine Electric and water connections Connecting the water inlet hose 1 Connect the supply pipe by screwing it to a cold water tab using a gas threaded con nection see figure Before performing the connection allow the waterto run freely until it is perfectly clear Unpacking and levelling Unpacking 1 Unpack the washing machine 2 Check whether the washing machine has been damaged during transport If this is the case do not install it and contact your retailer 3 Remove the four pro tective screws and the rubber washer with the respective spacer si tuated on the rear of the appliance see figure 4 Seal the gaps using the plastic plugs provided 5 Keep all the parts you will need them again if the washing machine needs to be moved to another location Warning should the screws be re used make sure you fasten the shorter ones at the top Packaging materials are not children s toys 3 Make sure there are no kinks or bends in the hose The water pressure at the tap must be within the values indicated in the Technical details table on the next page Levelling 1 Install the washing machine on a flat sturdy floor without resting it up against walls furniture cabinets or other 2 If the floor is not per fectly level compensate for any unevenness by tightening or loosening the adjustable front feet see figure the angle of inclination measu red according to the worktop must not ex ceed 2 Levelling your appliance correctly will provide it with stability and avoid any vibrations noise and shifting during operation 2 2 Connect the other end of the water inlet hose to the washing machine screwing it onto the ap pliance s cold water in let situated on the top right hand side on the rear of the appliance see figure If the water inlet hose is not long enough contact a specialist store or an authorised serviceman Never use hoses that have already been used

Скачать