![Planet SGSW-2840P4 [216/693] Static multicast router port configuration](/img/pdf.png)
Planet SGSW-2840P4 [216/693] Static multicast router port configuration
![Planet SGSW-2840P [216/693] Static multicast router port configuration](/views2/1070807/page216/bgd8.png)
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
216
The page includes the following fields:
Object Description
• VLAN ID
ID of configured VLAN
Range: 1-4094.
• Multicast Router List
Multicast routers dynamically discovered by this switch or those that are statically
assigned to an interface on this Managed Switch.
4.9.1.4 Static Multicast Router Port Configuration
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the
IGMP querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Managed
Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the
attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Managed Switch.
Figure 4-9-4 Static Multicast Router Port Configuration page screenshot
The page includes the following fields:
Object Description
• Interface
Activates the Port or Trunk scroll down list.
• VLAN ID
Selects the VLAN to propagate all multicast traffic coming from the attached
multicast router.
• Port or Trunk
Specifies the interface attached to a multicast router.
Содержание
- Layer 2 managed stackable switches 1
- Port 10 100 poe 4g tp sfp 1
- Port 10 100base tx 2g tp sfp 1
- Port 10 100base tx 4g tp sfp 1
- Sgsd 1022 sgsd 1022p 1
- Sgsw 2840 sgsw 2840r 1
- Sgsw 2840p sgsw 2840p4 1
- User s manual 1
- Ce mark warning 2
- Disclaimer 2
- Fcc warning 2
- Revision 2
- Trademarks 2
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 2
- Weee warning 2
- Table of conetnts 3
- Multicast 07 6
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 6
- Vlan configuration 73 6
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 8
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 13
- Client security commands 75 14
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 14
- Access control list commands 01 15
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 15
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 17
- Vlan commands 67 17
- Lldp commands 01 18
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 18
- Class of service commands 23 19
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 19
- Introdution 23
- Packet contents 23
- Product description 23
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 23
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 24
- How to use this manual 25
- Product features 25
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 25
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 26
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 27
- Hardware specification 28
- Layer 2 function 28
- Product specification 28
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 28
- Power over ethernet 29
- Standards conformance 29
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 29
- Environment specifications 30
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 30
- Hardware description 31
- Installation 31
- Switch front panel 31
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 31
- Led indications 32
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 32
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 33
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 34
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 35
- Switch rear panel 36
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 36
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 37
- Power notice 38
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 38
- Desktop installation 39
- Install the switch 39
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 39
- Rack mounting 40
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 40
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 41
- Installing the sfp transceiver 42
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 42
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 43
- Requirements 44
- Switch management 44
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 44
- Administration console 45
- Management access overview 45
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 45
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 46
- Snmp based network management 47
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 47
- Web management 47
- Management architecture 48
- Protocols 48
- Snmp protocol 48
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 48
- Virtual terminal protocols 48
- About web based management 49
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 49
- Web configuration 49
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 50
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 51
- Main web page 52
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 52
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 53
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 54
- System 55
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 55
- System information 56
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 56
- Switch information 57
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 57
- Bridge extension configuration 58
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 58
- Ip configuration 59
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 59
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 60
- Copy operation 61
- File management 61
- Jumbo frames 61
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 61
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 62
- Example 1 save current configuration setting 63
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 63
- Example 2 downloading system software from a server 64
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 64
- Example 3 downloading configuration settings from a server 65
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 65
- Example 4 saving or restoring configuration settings 66
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 66
- Delete 67
- Set startup 67
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 67
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 68
- Console port settings 69
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 69
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 70
- Telnet settings 71
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 71
- System log configuration 72
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 72
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 73
- Remote log configuration 74
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 74
- Displaying log messages 75
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 75
- Smtp e mail alert 76
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 76
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 77
- Upnp configuration 78
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 78
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 79
- Sntp configuration 80
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 80
- Clock time zone 81
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 81
- Lldp configuration 82
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 82
- Lldp port configuration 83
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 83
- Lldp port configuration 84
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 84
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 85
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 86
- Lldp trunk configuration 87
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 87
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 88
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 89
- Lldp local device information 90
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 90
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 91
- Remote port information 92
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 92
- Lldp remote information detail 93
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 93
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 94
- Lldp device statistics 95
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 95
- Lldp device statistics details 96
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 96
- Simple network management protocol 97
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 97
- Snmp agent status 98
- Snmp community 98
- Snmp configuration 98
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 98
- Snmp trap management 99
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 99
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 100
- Snmpv3 101
- Snmpv3 engine id 101
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 101
- Snmpv3 102
- Snmpv3 engine id 102
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 102
- Snmpv3 remote engine id 103
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 103
- Snmpv3 users 104
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 104
- Add remote snmpv3 new users 105
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 105
- Example add a new snmpv3 user 106
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 106
- Snmpv3 remote users 107
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 107
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 108
- Snmpv3 groups 109
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 109
- Example add a new snmpv3 group 110
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 110
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 111
- Snmpv3 view 112
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 112
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 113
- Port information 114
- Port management 114
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 114
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 115
- Port configuration 116
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 116
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 117
- Port broadcast control 118
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 118
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 119
- Mirror port configuration 120
- Port mirroring 120
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 120
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 121
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 122
- Input rate limit port configuration 123
- Rate limit 123
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 123
- Output rate limit port configuration 124
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 124
- Port statistics 125
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 125
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 126
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 127
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 128
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 129
- Link aggregation 130
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 130
- Trunk configuration 131
- Trunk information 131
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 131
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 132
- Trunk broadcast control 133
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 133
- Trunk membership 134
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 134
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 135
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 136
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 137
- Lacp configuration 138
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 138
- Lacp aggregation port 139
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 139
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 140
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 141
- Displaying lacp port counters 142
- Displaying lacp settings and status for the local side 142
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 142
- Displaying lacp status for the remote side 143
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 143
- Displaying lacp status for the remote side 144
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 144
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 145
- Address table 146
- Static addresses 146
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 146
- Dynamic addresses 147
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 147
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 148
- Address aging 149
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 149
- Spanning tree 150
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 150
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 151
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 152
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 153
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 154
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 155
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 156
- After applying the sta rules 157
- Before applying the sta rules 157
- Between switches b and c the two optional gigabit ports default port cost 4 on switch a are connected to one optional 157
- Designated port 157
- Ensure that the link between switch b and switch c is the blocked link 157
- Ethernet link default port cost 19 gigabit ports could be used but the port cost should be increased from the default to 157
- Gigabit port on both switch b and c the redundant link between switch b and c is deliberately chosen as a 100 mbps fast 157
- In this example only the default stp values are used 157
- Lan 2 lan 3 157
- Portcast 19 157
- Portcast 19 portcast 19 157
- Portcast 4 157
- Root port root port 157
- The switch with the lowest bridge id switch c was elected the root bridge and the ports were selected to give a high port cost 157
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 157
- Spanning tree information 158
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 158
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 159
- Multiple spanning tree protocol 160
- Rapid spanning tree protocol 160
- Spanning tree protocol 160
- Sta configuration 160
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 160
- Basic configuration of global settings 161
- Root device configuration 161
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 161
- Configuration settings for rstp 162
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 162
- Configuration settings for mstp 163
- Sta port information 163
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 163
- Displaying interface settings 164
- Sta port information 164
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 164
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 165
- Configuring interface settings 166
- Sta port configuration 166
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 166
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 167
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 168
- Configuring multiple spanning trees 169
- To use multiple spanning trees 169
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 169
- Displaying interface settings for mstp 170
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 170
- Configuring interface settings for mstp 171
- Mstp port configuration 171
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 171
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 172
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 173
- Vlan configuration 173
- Ieee 802 q standard 174
- Ieee 802 q vlans 174
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 174
- 802 q vlan tags 175
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 175
- Assigning ports to vlans 176
- Default vlans 176
- Port vlan id 176
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 176
- Automatic vlan registration 177
- Port overlapping 177
- Untagged vlans 177
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 177
- Vlan classification 177
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 178
- Vlan and link aggregation groups 178
- Vlan basic information 178
- Gvrp status 179
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 179
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 180
- Vlan current table 180
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 181
- Vlan static list 181
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 182
- Vlan static table 182
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 183
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 184
- Static membership by port 185
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 185
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 186
- Vlan port configuration 186
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 187
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 188
- Ieee 802 q tunneling q in q 189
- Q in q vlan 189
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 189
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 190
- Configuration limitations for qinq 191
- General configuration guidelines for qinq 191
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 191
- Q tunnel configuration 192
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 192
- Q tunnel port configuration 193
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 193
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 194
- Private vlan 195
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 195
- Isolated vlan 196
- Primary secondary associated group 196
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 196
- Displaying current private vlans 197
- Private vlan information 197
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 197
- Configuring private vlans 198
- Private vlan configuration 198
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 198
- Private vlan association 199
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 199
- Private vlan port information 200
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 200
- Private vlan port configuration 201
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 201
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 202
- Protocol vlan 203
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 203
- Protocol vlan configuration 204
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 204
- Protocol vlan port configuration 205
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 205
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 206
- Layer 2 igmp snooping and query 207
- Multicast 207
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 207
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 208
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 209
- Delaying member idle member 210
- Non member 210
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 210
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 211
- Configuring igmp snooping and query parameters 212
- Igmp configuration 212
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 212
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 213
- Igmp immediate leave 214
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 214
- Multicast router port information 215
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 215
- Static multicast router port configuration 216
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 216
- Ip multicast registration table 217
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 217
- Igmp member port table 218
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 218
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 219
- Igmp filter and throttling 220
- Igmp filter profile configuration 220
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 220
- Igmp filter profile configuration 221
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 221
- Igmp filter throttling port configuration 222
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 222
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 223
- Multicast vlan registration mvr 224
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 224
- Mvr configuration 225
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 225
- Mvr port configuration 226
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 226
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 227
- Mvr group member configuration 228
- Mvr port information 228
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 228
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 229
- Mvr group ip information 230
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 230
- Diffserv 231
- Priority 231
- Quality of service 231
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 231
- Priority 232
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 232
- Port priority configuration 233
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 233
- Ieee 802 p cos priority 234
- Traffic classes 234
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 234
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 235
- Queue mode 236
- Selecting the queue mode 236
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 236
- Queue scheduling 237
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 237
- Ip dscp priority status 238
- Layer 3 4 priority settings 238
- Mapping layer 3 4 priorities to cos values 238
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 238
- Ip dscp priority 239
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 239
- Ip precedence priority status 240
- Mapping ip precedence priority 240
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 240
- Ip precedence priority 241
- Mapping ip tos priority 241
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 241
- Ip tos priority status 242
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 242
- Ip tos priority 243
- Mapping ip port priority 243
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 243
- Ip port priority status 244
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 244
- Ip port priority 245
- Mapping cos values to acls 245
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 245
- Acl cos priority 246
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 246
- Configuring quality of service parameters 247
- Diffserv 247
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 247
- Configuring a diffserv class map 248
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 248
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 249
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 250
- Creating qos policies 251
- Policy map 251
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 251
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 252
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 253
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 254
- Attaching a policy map to ingress queues 255
- Service policy 255
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 255
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 256
- Voice vlans 256
- Voip traffic configuration 256
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 257
- Voip port configuration 257
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 258
- Telephony oui configuration 259
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 259
- Configuring user accounts 260
- Security 260
- User authentication 260
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 260
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 261
- Configuring local remote logon authentication 262
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 262
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 263
- Radius settings 264
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 264
- Tacacs settings 265
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 265
- Aaa authorization and accounting 266
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 266
- Aaa tacacs group settings 267
- Radius group settings 267
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 267
- Aaa accounting settings 268
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 268
- Aaa accounting update 269
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 269
- Aaa accounting 802 x port settings 270
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 270
- Aaa accounting exec command privileges 271
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 271
- Aaa accounting exec settings 272
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 272
- Aaa accounting summary 273
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 273
- Aaa accounting statistics summary 274
- Authorization settings 274
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 274
- Aaa authorization exec settings 275
- Aaa authorization summary 275
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 275
- Https setting 276
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 276
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 277
- Configure secure shell 278
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 278
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 279
- Ssh server settings 280
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 280
- Ssh host key settings 281
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 281
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 282
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 283
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 284
- X port authentication 284
- Understanding ieee 802 x port based authentication 285
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 285
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 286
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 287
- Displaying 802 x information 288
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 288
- X configuration 288
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 289
- X port configuration 289
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 290
- Displaying 802 x statistics 291
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 291
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 292
- Windows platform radius server configuration 292
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 293
- Configure sample eap md5 authentication 294
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 294
- X client configuration 294
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 295
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 296
- Client security 297
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 297
- Port security 298
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 298
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 299
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 300
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 301
- Web authentication 301
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 302
- Web authentication configuration 302
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 303
- Web authentication port configuration 303
- Web authentication port information 303
- Re authentication 304
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 304
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 305
- Network access mac address authentication 306
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 306
- Network access configuration 307
- Network access port configuration 307
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 307
- Network access mac address information 308
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 308
- Network access mac address information 309
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 309
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 310
- Access control lists 311
- Acl configuration 311
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 311
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 312
- Configure a standard acl 313
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 313
- Extended acl 314
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 314
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 315
- Mac acl 316
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 316
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 317
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 318
- Acl port binding 319
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 319
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 320
- Ip filter 321
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 321
- Web ip filter 321
- Snmp ip filter 322
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 322
- Telnet ip filter 323
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 323
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 324
- Dhcp snooping 325
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 325
- Dhcp snooping configuration 326
- Dhcp snooping vlan configuration 326
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 326
- Information option configuration 327
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 327
- Dhcp snooping port configuration 328
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 328
- Dhcp snooping port configuration 329
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 329
- Ip source guard 330
- Port configuration 330
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 330
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 331
- Static configuration 332
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 332
- Dynamic information 333
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 333
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 334
- Cluster 335
- Cluster configuration 335
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 335
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 336
- Cluster member configuration 337
- Cluster member information 337
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 337
- Cluster candidate information 338
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 338
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 339
- Power over ethernet powered device 340
- Power over ethernet sgsd 1022p sgsw 2840p sgsw 2840p4 340
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 340
- Power management 341
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 341
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 342
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 343
- Accessing the cli 344
- Command line interface 344
- Console connection 344
- Telnet connection 344
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 344
- Using the command line interface 344
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 345
- Command completion 346
- Entering commands 346
- Getting help on commands 346
- Keywords and arguments 346
- Minimum abbreviation 346
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 346
- Showing commands 347
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 347
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 348
- Negating the effect of commands 349
- Partial keyword lookup 349
- Understanding command modes 349
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 349
- Using command history 349
- Exec commands 350
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 350
- Configuration commands 351
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 351
- Command line processing 352
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 352
- Command groups 353
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 353
- Enable 354
- General commands 354
- Syntax 354
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 354
- Command mode 355
- Command usage 355
- Default setting 355
- Disable 355
- Related commands 355
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 355
- Command mode 356
- Command usage 356
- Configure 356
- Related commands 356
- Show history 356
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 356
- Command mode 357
- Command usage 357
- Reload 357
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 357
- Command mode 358
- Default setting 358
- Prompt 358
- Syntax 358
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 358
- Command mode 359
- Command usage 359
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 359
- Command mode 360
- Device designation commands 360
- Example 360
- Hostname 360
- Syntax 360
- System management commands 360
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 360
- Banner configure 361
- Banner information commands 361
- Command mode 361
- Command usage 361
- Default setting 361
- Syntax 361
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 361
- Example 362
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 362
- Banner configure company 363
- Banner configure dc power info 363
- Command mode 363
- Command usage 363
- Default setting 363
- Example 363
- Syntax 363
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 363
- Banner configure department 364
- Banner configure equipment info 364
- Command mode 364
- Command usage 364
- Default setting 364
- Example 364
- Syntax 364
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 364
- Banner configure equipment location 365
- Command mode 365
- Command usage 365
- Default setting 365
- Example 365
- Syntax 365
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 365
- Banner configure ip lan 366
- Banner configure lp number 366
- Command mode 366
- Command usage 366
- Default setting 366
- Example 366
- Syntax 366
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 366
- Banner configure manager info 367
- Command mode 367
- Command usage 367
- Default setting 367
- Example 367
- Syntax 367
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 367
- Banner configure mux 368
- Banner configure note 368
- Command mode 368
- Command usage 368
- Default setting 368
- Example 368
- Syntax 368
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 368
- Command mode 369
- Example 369
- Show banner 369
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 369
- Command mode 370
- Command usage 370
- Default setting 370
- Show startup config 370
- System status commands 370
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 370
- Example 371
- Show running config 371
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 371
- Command mode 372
- Command usage 372
- Default setting 372
- Related commands 372
- Show running config 372
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 372
- Example 373
- Show system 373
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 373
- Command mode 374
- Command usage 374
- Example 374
- Related commands 374
- Show system 374
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 374
- Command mode 375
- Command usage 375
- Example 375
- Show users 375
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 375
- Command mode 376
- Command usage 376
- Example 376
- Frame size commands 376
- Show version 376
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 376
- Command mode 377
- Command usage 377
- Default setting 377
- Frame size commands 377
- Jumbo frame 377
- Syntax 377
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 377
- Example 378
- File management commands 378
- Syntax 378
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 378
- Command mode 379
- Command usage 379
- Default setting 379
- Example 379
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 379
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 380
- Command mode 381
- Command usage 381
- Delete 381
- Example 381
- Syntax 381
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 381
- Command mode 382
- Command usage 382
- Default setting 382
- Example 382
- Related commands 382
- Syntax 382
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 382
- Boot system 383
- Command mode 383
- Default setting 383
- Example 383
- Syntax 383
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 383
- Whichboot 383
- Command mode 384
- Command usage 384
- Example 384
- Line commands 384
- Related commands 384
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 384
- Command mode 385
- Command usage 385
- Default setting 385
- Example 385
- Related commands 385
- Syntax 385
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 385
- Command mode 386
- Command usage 386
- Default setting 386
- Example 386
- Password 386
- Related commands 386
- Syntax 386
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 386
- Command mode 387
- Command usage 387
- Default setting 387
- Example 387
- Related commands 387
- Syntax 387
- Timeout login response 387
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 387
- Command mode 388
- Command usage 388
- Default setting 388
- Example 388
- Exec timeout 388
- Password thresh 388
- Related commands 388
- Syntax 388
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 388
- Command mode 389
- Command usage 389
- Databits 389
- Default setting 389
- Example 389
- Related commands 389
- Silent time 389
- Syntax 389
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 389
- Command mode 390
- Command usage 390
- Default setting 390
- Example 390
- Parity 390
- Related commands 390
- Syntax 390
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 390
- Command mode 391
- Command usage 391
- Default setting 391
- Example 391
- Stopbits 391
- Syntax 391
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 391
- Command mode 392
- Command usage 392
- Default setting 392
- Disconnect 392
- Event logging commands 392
- Example 392
- Related commands 392
- Show line 392
- Syntax 392
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 392
- Event logging commands 393
- Logging on 393
- Syntax 393
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 393
- Command mode 394
- Command usage 394
- Default setting 394
- Example 394
- Logging history 394
- Related commands 394
- Syntax 394
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 394
- Command mode 395
- Command usage 395
- Default setting 395
- Example 395
- Logging host 395
- Syntax 395
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 395
- Command mode 396
- Command usage 396
- Default setting 396
- Example 396
- Logging facility 396
- Logging trap 396
- Syntax 396
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 396
- Clear log 397
- Command mode 397
- Default setting 397
- Example 397
- Related commands 397
- Show logging 397
- Syntax 397
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 397
- Command mode 398
- Example 398
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 398
- Command mode 399
- Command usage 399
- Default setting 399
- Example 399
- Related commands 399
- Show log 399
- Smtp alert commands 399
- Syntax 399
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 399
- Command mode 400
- Command usage 400
- Default setting 400
- Logging sendmail host 400
- Smtp alert commands 400
- Syntax 400
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 400
- Command mode 401
- Command usage 401
- Default setting 401
- Example 401
- Logging sendmail level 401
- Logging sendmail source email 401
- Syntax 401
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 401
- Command mode 402
- Command usage 402
- Default setting 402
- Example 402
- Logging sendmail 402
- Logging sendmail destination email 402
- Syntax 402
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 402
- Command mode 403
- Example 403
- Show logging sendmail 403
- Time commands 403
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 403
- Command mode 404
- Command usage 404
- Default setting 404
- Example 404
- Related commands 404
- Sntp client 404
- Syntax 404
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 404
- Command mode 405
- Command usage 405
- Default setting 405
- Example 405
- Related commands 405
- Sntp poll 405
- Sntp server 405
- Syntax 405
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 405
- Clock timezone 406
- Command mode 406
- Command usage 406
- Default setting 406
- Example 406
- Related commands 406
- Show sntp 406
- Syntax 406
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 406
- Calendar set 407
- Command mode 407
- Command usage 407
- Default setting 407
- Example 407
- Related commands 407
- Syntax 407
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 407
- Command mode 408
- Default setting 408
- Example 408
- Show calendar 408
- Switch cluster commands 408
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 408
- Cluster 409
- Cluster commander 409
- Command mode 409
- Command usage 409
- Default setting 409
- Example 409
- Syntax 409
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 409
- Cluster ip pool 410
- Cluster member 410
- Command mode 410
- Command usage 410
- Default setting 410
- Example 410
- Syntax 410
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 410
- Command mode 411
- Command usage 411
- Default setting 411
- Example 411
- Rcommand 411
- Show cluster 411
- Syntax 411
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 411
- Command mode 412
- Example 412
- Show cluster candidates 412
- Show cluster members 412
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 412
- Example 413
- Snmp commands 413
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 413
- Command mode 414
- Command usage 414
- Default setting 414
- Example 414
- Show snmp 414
- Snmp server 414
- Syntax 414
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 414
- Default setting 415
- Snmp server community 415
- Syntax 415
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 415
- Command mode 416
- Default setting 416
- Example 416
- Related commands 416
- Snmp server contact 416
- Syntax 416
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 416
- Command mode 417
- Command usage 417
- Default setting 417
- Related commands 417
- Snmp server host 417
- Syntax 417
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 417
- Example 418
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 418
- Command mode 419
- Command usage 419
- Default setting 419
- Example 419
- Related commands 419
- Snmp server enable traps 419
- Syntax 419
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 419
- Command mode 420
- Command usage 420
- Default setting 420
- Example 420
- Related commands 420
- Show snmp engine id 420
- Snmp server engine id 420
- Syntax 420
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 420
- Command mode 421
- Command usage 421
- Default setting 421
- Example 421
- Snmp server view 421
- Syntax 421
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 421
- Command mode 422
- Exampl 422
- Example 422
- Show snmp view 422
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 422
- Command mode 423
- Command usage 423
- Default setting 423
- Snmp server group 423
- Syntax 423
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 423
- Command mode 424
- Example 424
- Show snmp group 424
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 424
- Snmp server user 425
- Syntax 425
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 425
- Command mode 426
- Command usage 426
- Default setting 426
- Example 426
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 426
- Command mode 427
- Example 427
- Show snmp user 427
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 427
- Authentication commands 428
- Syntax 428
- User account commands 428
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 428
- Username 428
- Command mode 429
- Command usage 429
- Default setting 429
- Enable password 429
- Exampl 429
- Example 429
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 429
- Authentication sequence 430
- Command mode 430
- Command usage 430
- Default setting 430
- Example 430
- Related commands 430
- Syntax 430
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 430
- Authentication enable 431
- Authentication login 431
- Command mod 431
- Command mode 431
- Command usage 431
- Default setting 431
- Exampl 431
- Example 431
- Related commands 431
- Syntax 431
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 431
- Command mode 432
- Command usage 432
- Default setting 432
- Example 432
- Radius client 432
- Related commands 432
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 432
- Command mode 433
- Default setting 433
- Example 433
- Radius server host 433
- Syntax 433
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 433
- Command mode 434
- Default setting 434
- Example 434
- Radius server acct port 434
- Radius server auth port 434
- Radius server key 434
- Syntax 434
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 434
- Command mode 435
- Default setting 435
- Example 435
- Radius server retransmit 435
- Radius server timeout 435
- Syntax 435
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 435
- Command mode 436
- Default setting 436
- Example 436
- Show radius server 436
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 436
- Command mode 437
- Default setting 437
- Example 437
- Syntax 437
- Tacacs client 437
- Tacacs server host 437
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 437
- Command mode 438
- Default setting 438
- Example 438
- Syntax 438
- Tacacs server key 438
- Tacacs server port 438
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 438
- Command mode 439
- Default setting 439
- Example 439
- Syntax 439
- Tacacs server retransmit 439
- Tacacs server timeout 439
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 439
- Command mode 440
- Default setting 440
- Example 440
- Show tacacs server 440
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 440
- Aaa commands 441
- Aaa group server 441
- Command mode 441
- Default setting 441
- Example 441
- Syntax 441
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 441
- Aaa accounting dot1x 442
- Command mode 442
- Command usage 442
- Default setting 442
- Example 442
- Server 442
- Syntax 442
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 442
- Aaa accounting exec 443
- Command mode 443
- Command usage 443
- Default setting 443
- Example 443
- Syntax 443
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 443
- Aaa accounting commands 444
- Command mode 444
- Command usage 444
- Default setting 444
- Example 444
- Syntax 444
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 444
- Aaa accounting update 445
- Accounting dot1x 445
- Command mode 445
- Command usage 445
- Default setting 445
- Example 445
- Syntax 445
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 445
- Accounting commands 446
- Accounting exec 446
- Command mode 446
- Default setting 446
- Example 446
- Syntax 446
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 446
- Aaa authorization exec 447
- Command mode 447
- Command usage 447
- Default setting 447
- Example 447
- Syntax 447
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 447
- Authorization exec 448
- Command mode 448
- Default setting 448
- Example 448
- Show accounting 448
- Syntax 448
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 448
- Command mode 449
- Default setting 449
- Example 449
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 449
- Command mode 450
- Default setting 450
- Example 450
- Ip http port 450
- Ip http server 450
- Related commands 450
- Syntax 450
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 450
- Web server commands 450
- Command mode 451
- Command usage 451
- Default setting 451
- Example 451
- Ip http secure server 451
- Related commands 451
- Syntax 451
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 451
- Command mode 452
- Command usage 452
- Default setting 452
- Example 452
- Ip http secure port 452
- Related commands 452
- Syntax 452
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 452
- Command mode 453
- Default setting 453
- Example 453
- Ip telnet server 453
- Related commands 453
- Syntax 453
- Telnet server commands 453
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 453
- Configuration guidelines 454
- Secure shell commands 454
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 454
- Exampl 455
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 455
- Command mode 456
- Command usage 456
- Default setting 456
- Ip ssh server 456
- Syntax 456
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 456
- Command mode 457
- Command usage 457
- Default setting 457
- Example 457
- Ip ssh timeout 457
- Related commands 457
- Syntax 457
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 457
- Command mode 458
- Command usage 458
- Default setting 458
- Example 458
- Ip ssh authentication retries 458
- Ip ssh server key size 458
- Related commands 458
- Syntax 458
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 458
- Command mode 459
- Command usage 459
- Default setting 459
- Delete public key 459
- Example 459
- Ip ssh crypto host key generate 459
- Syntax 459
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 459
- Command mode 460
- Command usage 460
- Default setting 460
- Example 460
- Ip ssh crypto zeroize 460
- Related commands 460
- Syntax 460
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 460
- Command mode 461
- Default setting 461
- Example 461
- Ip ssh save host key 461
- Related commands 461
- Show ip ssh 461
- Syntax 461
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 461
- Command mode 462
- Example 462
- Show ssh 462
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 462
- Command mode 463
- Command usage 463
- Default setting 463
- Example 463
- Show public key 463
- Syntax 463
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 463
- X port authentication 463
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 464
- X port authentication 464
- Command mode 465
- Default setting 465
- Dot1x default 465
- Dot1x max req 465
- Dot1x system auth control 465
- Example 465
- Syntax 465
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 465
- Command mode 466
- Default 466
- Dot1x operation mode 466
- Dot1x port control 466
- Example 466
- Syntax 466
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 466
- Command mode 467
- Command usage 467
- Default 467
- Dot1x re authenticate 467
- Example 467
- Syntax 467
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 467
- Command mode 468
- Command usage 468
- Dot1x re authentication 468
- Dot1x timeout quiet period 468
- Example 468
- Related commands 468
- Syntax 468
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 468
- Command mode 469
- Default 469
- Dot1x timeout re authperiod 469
- Dot1x timeout tx period 469
- Example 469
- Syntax 469
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 469
- Command mode 470
- Command usage 470
- Default 470
- Dot1x intrusion action 470
- Example 470
- Syntax 470
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 470
- Command mode 471
- Command usage 471
- Show dot1x 471
- Syntax 471
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 471
- Example 472
- Management 472
- Management ip filter commands 472
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 472
- Management 473
- Management ip filter commands 473
- Syntax 473
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 473
- Command mode 474
- Command usage 474
- Default setting 474
- Exampl 474
- Example 474
- Show management 474
- Syntax 474
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 474
- Client security commands 475
- Example 475
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 475
- Command mode 476
- Default setting 476
- Port security 476
- Port security commands 476
- Syntax 476
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 476
- Command usage 477
- Exampl 477
- Example 477
- Network access mac address authentication 477
- Related commands 477
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 477
- Command mode 478
- Command usage 478
- Default setting 478
- Network access mode 478
- Syntax 478
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 478
- Command mode 479
- Command usage 479
- Default setting 479
- Example 479
- Mac authentication intrusion action 479
- Network access max mac count 479
- Syntax 479
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 479
- Command mode 480
- Command usage 480
- Default setting 480
- Example 480
- Mac authentication max mac count 480
- Network access dynamic vlan 480
- Syntax 480
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 480
- Command mode 481
- Command usage 481
- Default setting 481
- Exampl 481
- Example 481
- Network access guest vlan 481
- Syntax 481
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 481
- Clear network access 482
- Command mode 482
- Command usage 482
- Default setting 482
- Example 482
- Mac authentication reauth time 482
- Syntax 482
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 482
- Command mode 483
- Default setting 483
- Example 483
- Show network access 483
- Syntax 483
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 483
- Command mode 484
- Command usage 484
- Default setting 484
- Exampl 484
- Example 484
- Show network access mac address table 484
- Syntax 484
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 484
- Web authentication 484
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 485
- Web auth login attempts 485
- Web authentication 485
- Command mode 486
- Default setting 486
- Example 486
- Syntax 486
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 486
- Web auth quiet period 486
- Web auth session timeout 486
- Command mode 487
- Command usage 487
- Default setting 487
- Example 487
- Syntax 487
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 487
- Web auth 487
- Web auth system auth control 487
- Command mode 488
- Default setting 488
- Example 488
- Syntax 488
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 488
- Web auth re authenticate ip 488
- Web auth re authenticate port 488
- Command mode 489
- Default setting 489
- Example 489
- Show web auth 489
- Show web auth interface 489
- Syntax 489
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 489
- Command mode 490
- Command usage 490
- Default setting 490
- Example 490
- Show web auth summary 490
- Syntax 490
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 490
- Command mode 491
- Command usage 491
- Default setting 491
- Dhcp snooping commands 491
- Ip dhcp snooping 491
- Syntax 491
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 491
- Exampl 492
- Example 492
- Related commands 492
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 492
- Command mode 493
- Command usage 493
- Default setting 493
- Exampl 493
- Example 493
- Ip dhcp snooping trust 493
- Ip dhcp snooping vlan 493
- Related commands 493
- Syntax 493
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 493
- Command mode 494
- Command usage 494
- Default setting 494
- Exampl 494
- Example 494
- Ip dhcp snooping verify mac address 494
- Related commands 494
- Syntax 494
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 494
- Command mode 495
- Command usage 495
- Default setting 495
- Exampl 495
- Example 495
- Ip dhcp snooping information option 495
- Related commands 495
- Syntax 495
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 495
- Command mode 496
- Command usage 496
- Default setting 496
- Exampl 496
- Example 496
- Ip dhcp snooping information policy 496
- Related commands 496
- Show ip dhcp snooping 496
- Syntax 496
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 496
- Command mode 497
- Example 497
- Ip source guard commands 497
- Show ip dhcp snooping binding 497
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 497
- Command mode 498
- Command usage 498
- Default setting 498
- Ip source guard 498
- Syntax 498
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 498
- Default setting 499
- Exampl 499
- Example 499
- Ip source guard binding 499
- Related commands 499
- Syntax 499
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 499
- Access control list commands 500
- Command mode 500
- Command usage 500
- Exampl 500
- Example 500
- Related commands 500
- Show ip source guard 500
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 500
- Access control list commands 501
- Command mode 501
- Example 501
- Show ip source guard binding 501
- Syntax 501
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 501
- Access list ip 502
- Command mode 502
- Command usage 502
- Default setting 502
- Ip acls 502
- Syntax 502
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 502
- Command mode 503
- Command usage 503
- Default setting 503
- Example 503
- Permit deny standard acl 503
- Related commands 503
- Syntax 503
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 503
- Command mode 504
- Default setting 504
- Permit deny extended acl 504
- Related commands 504
- Syntax 504
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 504
- Command usage 505
- Exampl 505
- Example 505
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 505
- Command mode 506
- Example 506
- Related commands 506
- Show ip access list 506
- Syntax 506
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 506
- Command mode 507
- Command usage 507
- Default setting 507
- Example 507
- Ip access group 507
- Related commands 507
- Show ip access group 507
- Syntax 507
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 507
- Command mode 508
- Command usage 508
- Default setting 508
- Example 508
- Map access list ip 508
- Related commands 508
- Syntax 508
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 508
- Command mode 509
- Example 509
- Mac acls 509
- Related commands 509
- Show map access list ip 509
- Syntax 509
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 509
- Access list mac 510
- Command mode 510
- Command usage 510
- Default setting 510
- Example 510
- Permit deny mac acl 510
- Related commands 510
- Syntax 510
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 510
- Command mode 511
- Command usage 511
- Default setting 511
- Example 511
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 511
- Command mode 512
- Default setting 512
- Example 512
- Mac access group 512
- Related commands 512
- Show mac access list 512
- Syntax 512
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 512
- Command mode 513
- Command usage 513
- Example 513
- Map access list mac 513
- Related commands 513
- Show mac access group 513
- Syntax 513
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 513
- Command mode 514
- Command usage 514
- Default setting 514
- Example 514
- Related commands 514
- Show map access list mac 514
- Syntax 514
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 514
- Acl information 515
- Command mode 515
- Example 515
- Interface commands 515
- Related commands 515
- Show access list 515
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 515
- Command mode 516
- Example 516
- Interface commands 516
- Show access group 516
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 516
- Command mode 517
- Default setting 517
- Description 517
- Example 517
- Interface 517
- Syntax 517
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 517
- Command mode 518
- Command usage 518
- Default setting 518
- Exampl 518
- Example 518
- Speed duplex 518
- Syntax 518
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 518
- Command mode 519
- Command usage 519
- Default setting 519
- Exampl 519
- Example 519
- Negotiation 519
- Related commands 519
- Syntax 519
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 519
- Capabilities 520
- Command mode 520
- Command usage 520
- Default setting 520
- Exampl 520
- Example 520
- Related commands 520
- Syntax 520
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 520
- Broadcast byte rate 521
- Command mode 521
- Command usage 521
- Default setting 521
- Exampl 521
- Example 521
- Flowcontrol 521
- Related commands 521
- Shutdown 521
- Syntax 521
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 521
- Broadcast byte rate 522
- Command mode 522
- Command usage 522
- Default setting 522
- Exampl 522
- Example 522
- Related commands 522
- Shutdown 522
- Syntax 522
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 522
- Command mode 523
- Command usage 523
- Default setting 523
- Exampl 523
- Example 523
- Switchport broadcast 523
- Syntax 523
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 523
- Clear counters 524
- Command mode 524
- Command usage 524
- Default setting 524
- Exampl 524
- Example 524
- Show interfaces status 524
- Syntax 524
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 524
- Command usage 525
- Default setting 525
- Example 525
- Show interfaces counters 525
- Syntax 525
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 525
- Command mode 526
- Command usage 526
- Example 526
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 526
- Command mode 527
- Command usage 527
- Default setting 527
- Exampl 527
- Example 527
- Show interfaces switchport 527
- Syntax 527
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 527
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 528
- Exampl 529
- Link aggregation commands 529
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 529
- Channel group 530
- Command mode 530
- Command usage 530
- Default setting 530
- Exampl 530
- Example 530
- Syntax 530
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 530
- Command mode 531
- Command usage 531
- Default setting 531
- Example 531
- Lacp system priority 531
- Syntax 531
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 531
- Command mode 532
- Command usage 532
- Default settin 532
- Default setting 532
- Lacp system priority 532
- Syntax 532
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 532
- Command mode 533
- Command usage 533
- Default settin 533
- Default setting 533
- Example 533
- Lacp admin key ethernet interface 533
- Syntax 533
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 533
- Command mode 534
- Command usage 534
- Default settin 534
- Default setting 534
- Example 534
- Lacp admin key port channel 534
- Lacp port priority 534
- Syntax 534
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 534
- Command mode 535
- Command usage 535
- Default setting 535
- Example 535
- Show lacp 535
- Syntax 535
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 535
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 536
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 537
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 538
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 539
- Command mode 540
- Command usage 540
- Default setting 540
- Exampl 540
- Example 540
- Mirror port commands 540
- Port monitor 540
- Syntax 540
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 540
- Command mode 541
- Command usage 541
- Default setting 541
- Example 541
- Rate limit commands 541
- Show port monitor 541
- Syntax 541
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 541
- Address table commands 542
- Command mode 542
- Command usage 542
- Default setting 542
- Exampl 542
- Example 542
- Rate limit 542
- Syntax 542
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 542
- Command mode 543
- Command usage 543
- Default setting 543
- Example 543
- Mac address table static 543
- Syntax 543
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 543
- Clear mac address table dynamic 544
- Command mode 544
- Command usage 544
- Default setting 544
- Example 544
- Show mac address table 544
- Syntax 544
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 544
- Command mode 545
- Command usage 545
- Default setting 545
- Exampl 545
- Example 545
- Mac address table aging time 545
- Syntax 545
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 545
- Command mode 546
- Default setting 546
- Example 546
- Show mac address table aging time 546
- Spanning tree commands 546
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 546
- Command mode 547
- Command usage 547
- Default setting 547
- Example 547
- Spanning tree 547
- Syntax 547
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 547
- Command mode 548
- Command usage 548
- Default setting 548
- Exampl 548
- Spanning tree mode 548
- Syntax 548
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 548
- Command mode 549
- Command usage 549
- Default setting 549
- Exampl 549
- Example 549
- Spanning tree forward time 549
- Spanning tree hello time 549
- Syntax 549
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 549
- Command mode 550
- Command usage 550
- Default setting 550
- Example 550
- Related commands 550
- Spanning tree max age 550
- Syntax 550
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 550
- Command mode 551
- Command usage 551
- Default setting 551
- Example 551
- Spanning tree pathcost method 551
- Spanning tree priority 551
- Syntax 551
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 551
- Command mode 552
- Command usage 552
- Default setting 552
- Example 552
- Spanning tree mst configuration 552
- Spanning tree transmission limit 552
- Syntax 552
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 552
- Command mode 553
- Command usage 553
- Default setting 553
- Example 553
- Mst vlan 553
- Related commands 553
- Syntax 553
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 553
- Command mode 554
- Command usage 554
- Default setting 554
- Example 554
- Mst priority 554
- Syntax 554
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 554
- Command mode 555
- Command usage 555
- Default setting 555
- Example 555
- Related commands 555
- Revision 555
- Syntax 555
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 555
- Command mode 556
- Command usage 556
- Default setting 556
- Example 556
- Max hops 556
- Spanning tree spanning disabled 556
- Syntax 556
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 556
- Default setting 557
- Spanning tree cost 557
- Syntax 557
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 557
- Command mode 558
- Command usage 558
- Default setting 558
- Example 558
- Spanning tree port priority 558
- Syntax 558
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 558
- Command mode 559
- Command usage 559
- Default setting 559
- Example 559
- Related commands 559
- Spanning tree edge port 559
- Spanning tree portfast 559
- Syntax 559
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 559
- Command mode 560
- Command usage 560
- Default setting 560
- Example 560
- Related commands 560
- Spanning tree link type 560
- Syntax 560
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 560
- Command mode 561
- Command usage 561
- Default setting 561
- Example 561
- Spanning tree mst cost 561
- Syntax 561
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 561
- Command mode 562
- Command usage 562
- Default setting 562
- Example 562
- Related commands 562
- Spanning tree mst port priority 562
- Syntax 562
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 562
- Command mode 563
- Command usage 563
- Default setting 563
- Example 563
- Related commands 563
- Show spanning tree 563
- Spanning tree protocol migration 563
- Syntax 563
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 563
- Command mode 564
- Command usage 564
- Example 564
- Show spanning tree mst configuration 564
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 564
- Command mode 565
- Example 565
- Show spanning tree mst configuration 565
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 565
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 566
- Gvrp and bridge extension commands 567
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 567
- Vlan commands 567
- Bridge ext gvrp 568
- Command mode 568
- Command usage 568
- Default setting 568
- Example 568
- Show bridge ext 568
- Syntax 568
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 568
- Command mode 569
- Default setting 569
- Example 569
- Show gvrp configuration 569
- Switchport gvrp 569
- Syntax 569
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 569
- Command mode 570
- Command usage 570
- Default setting 570
- Garp timer 570
- Syntax 570
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 570
- Command mode 571
- Default setting 571
- Example 571
- Related commands 571
- Show garp timer 571
- Syntax 571
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 571
- Command mod 572
- Command mode 572
- Command usage 572
- Default settin 572
- Default setting 572
- Editing vlan groups 572
- Example 572
- Related commands 572
- Syntax 572
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 572
- Vlan database 572
- Command mode 573
- Command usage 573
- Configuring vlan interfaces 573
- Default setting 573
- Exampl 573
- Example 573
- Related commands 573
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 573
- Command mode 574
- Default setting 574
- Exampl 574
- Example 574
- Interface vlan 574
- Related commands 574
- Switchport mode 574
- Syntax 574
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 574
- Command mode 575
- Command usage 575
- Default setting 575
- Example 575
- Related commands 575
- Switchport acceptable frame types 575
- Syntax 575
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 575
- Command mode 576
- Command usage 576
- Default setting 576
- Example 576
- Related commands 576
- Switchport ingress filtering 576
- Syntax 576
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 576
- Command mode 577
- Command usage 577
- Default setting 577
- Example 577
- Switchport allowed vlan 577
- Switchport native vlan 577
- Syntax 577
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 577
- Command mode 578
- Command usage 578
- Default setting 578
- Example 578
- Switchport forbidden vlan 578
- Syntax 578
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 578
- Command mode 579
- Default setting 579
- Displaying vlan information 579
- Example 579
- Show vlan 579
- Syntax 579
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 579
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 580
- Configuring ieee 802 q tunneling 581
- General configuration guidelines for qinq 581
- Limitations for qinq 581
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 581
- Command mode 582
- Command usage 582
- Default setting 582
- Dot1q tunnel system tunnel control 582
- Example 582
- Related commands 582
- Switchport dot1q tunnel mode 582
- Syntax 582
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 582
- Command mode 583
- Command usage 583
- Default 583
- Default setting 583
- Example 583
- Related commands 583
- Settin 583
- Switchport dot1q tunnel tpid 583
- Syntax 583
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 583
- Command mode 584
- Example 584
- Related commands 584
- Show dot1q tunnel 584
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 584
- Configuring private vlans 585
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 585
- Command mode 586
- Command usage 586
- Default setting 586
- Example 586
- Private vlan 586
- Syntax 586
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 586
- Command mode 587
- Command usage 587
- Default settin 587
- Default setting 587
- Example 587
- Private vlan association 587
- Switchport mode private vlan 587
- Syntax 587
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 587
- Command mode 588
- Command usage 588
- Default setting 588
- Example 588
- Switchport private vlan host association 588
- Syntax 588
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 588
- Command mode 589
- Command usage 589
- Default setting 589
- Example 589
- Switchport private vlan isolated 589
- Switchport private vlan mapping 589
- Syntax 589
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 589
- Command mode 590
- Default setting 590
- Example 590
- Show private vlan 590
- Syntax 590
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 590
- Configuring protocol based vlans 591
- Default setting 591
- Protocol vlan protocol group configuring groups 591
- Syntax 591
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 591
- Command mode 592
- Command usage 592
- Default setting 592
- Example 592
- Protocol vlan protocol group configuring interfaces 592
- Syntax 592
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 592
- Command mode 593
- Default setting 593
- Example 593
- Show protocol vlan protocol group 593
- Syntax 593
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 593
- Command mode 594
- Default setting 594
- Example 594
- Show interfaces protocol group 594
- Syntax 594
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 594
- Command mode 595
- Command usage 595
- Configuring voice vlans 595
- Default setting 595
- Syntax 595
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 595
- Voice vlan 595
- Command mode 596
- Command usage 596
- Default setting 596
- Exampl 596
- Example 596
- Syntax 596
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 596
- Voice vlan aging 596
- Voice vlan mac address 596
- Command mode 597
- Command usage 597
- Default setting 597
- Example 597
- Switchport voice vlan 597
- Syntax 597
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 597
- Command mode 598
- Command usage 598
- Default setting 598
- Example 598
- Switchport voice vlan rule 598
- Syntax 598
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 598
- Command mode 599
- Command usage 599
- Default setting 599
- Example 599
- Switchport voice vlan priority 599
- Switchport voice vlan security 599
- Syntax 599
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 599
- Command mode 600
- Default setting 600
- Example 600
- Lldp commands 600
- Show voice vlan 600
- Syntax 600
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 600
- Lldp commands 601
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 601
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 602
- Command mode 603
- Command usage 603
- Default 603
- Default setting 603
- Example 603
- Lldp holdtime multiplier 603
- Settin 603
- Syntax 603
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 603
- Command mode 604
- Command usage 604
- Default settin 604
- Default setting 604
- Example 604
- Lldp medfaststartcount 604
- Lldp notification interval 604
- Syntax 604
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 604
- Command mode 605
- Command usage 605
- Default 605
- Default settin 605
- Default setting 605
- Example 605
- Lldp refresh interval 605
- Lldp reinit delay 605
- Settin 605
- Syntax 605
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 605
- Command mode 606
- Command usage 606
- Default settin 606
- Default setting 606
- Example 606
- Lldp tx delay 606
- Syntax 606
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 606
- Command mode 607
- Command usage 607
- Default setting 607
- Example 607
- Lldp admin status 607
- Lldp notification 607
- Syntax 607
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 607
- Command mode 608
- Command usage 608
- Default setting 608
- Example 608
- Lldp basic tlv management ip address 608
- Lldp mednotification 608
- Syntax 608
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 608
- Command mode 609
- Command usage 609
- Default setting 609
- Example 609
- Lldp basic tlv port description 609
- Syntax 609
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 609
- Command mode 610
- Command usage 610
- Default setting 610
- Example 610
- Lldp basic tlv system capabilities 610
- Lldp basic tlv system description 610
- Syntax 610
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 610
- Command mode 611
- Command usage 611
- Default setting 611
- Example 611
- Lldp basic tlv system name 611
- Lldp dot1 tlv proto ident 611
- Syntax 611
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 611
- Command mode 612
- Command usage 612
- Default setting 612
- Example 612
- Lldp dot1 tlv proto vid 612
- Lldp dot1 tlv pvid 612
- Syntax 612
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 612
- Command mode 613
- Command usage 613
- Default setting 613
- Example 613
- Lldp dot1 tlv vlan name 613
- Lldp dot3 tlv link agg 613
- Syntax 613
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 613
- Command mode 614
- Command usage 614
- Default setting 614
- Example 614
- Lldp dot3 tlv mac phy 614
- Lldp dot3 tlv max frame 614
- Syntax 614
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 614
- Command mode 615
- Command usage 615
- Default setting 615
- Example 615
- Lldp dot3 tlv poe 615
- Lldp medtlv extpoe 615
- Syntax 615
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 615
- Command mode 616
- Command usage 616
- Default setting 616
- Example 616
- Lldp medtlv inventory 616
- Lldp medtlv location 616
- Syntax 616
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 616
- Command mode 617
- Command usage 617
- Default setting 617
- Example 617
- Lldp medtlv med cap 617
- Syntax 617
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 617
- Command mode 618
- Command usage 618
- Default setting 618
- Example 618
- Lldp medtlv network policy 618
- Show lldp config 618
- Syntax 618
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 618
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 619
- Command mode 620
- Example 620
- Show lldp info local device 620
- Syntax 620
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 620
- Command mode 621
- Example 621
- Show lldp info remote device 621
- Show lldp info statistics 621
- Syntax 621
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 621
- Command mode 622
- Example 622
- Syntax 622
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 622
- Class of service commands 623
- Priority commands layer 2 623
- Queue mode 623
- Syntax 623
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 623
- Command mode 624
- Command usage 624
- Default setting 624
- Example 624
- Switchport priority default 624
- Syntax 624
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 624
- Command mode 625
- Command usage 625
- Default setting 625
- Example 625
- Queue bandwidth 625
- Related commands 625
- Syntax 625
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 625
- Command mode 626
- Command usage 626
- Default setting 626
- Example 626
- Queue cos map 626
- Related commands 626
- Syntax 626
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 626
- Command mode 627
- Default setting 627
- Example 627
- Related commands 627
- Show queue bandwidth 627
- Show queue mode 627
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 627
- Command mode 628
- Default setting 628
- Example 628
- Show queue cos map 628
- Syntax 628
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 628
- Default setting 629
- Map ip dscp 629
- Priority commands layer 3 and 4 629
- Syntax 629
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 629
- Command mode 630
- Command usage 630
- Default setting 630
- Example 630
- Map ip port 630
- Syntax 630
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 630
- Command mode 631
- Command usage 631
- Default settin 631
- Default setting 631
- Example 631
- Map ip precedence 631
- Syntax 631
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 631
- Command mode 632
- Command usage 632
- Default settin 632
- Default setting 632
- Example 632
- Map ip tos 632
- Syntax 632
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 632
- Command mode 633
- Command usage 633
- Default setting 633
- Example 633
- Map access list ip 633
- Map access list mac 633
- Syntax 633
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 633
- Command mode 634
- Command usage 634
- Example 634
- Related commands 634
- Show map ip dscp 634
- Show map ip port 634
- Syntax 634
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 634
- Command mode 635
- Example 635
- Related commands 635
- Show map ip precedence 635
- Syntax 635
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 635
- Command mode 636
- Example 636
- Related commands 636
- Show map ip tos 636
- Syntax 636
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 636
- Command mode 637
- Example 637
- Quality of service commands 637
- Show map access list 637
- Syntax 637
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 637
- Class map 638
- Command mode 638
- Default setting 638
- Syntax 638
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 638
- Command mode 639
- Command usage 639
- Default setting 639
- Example 639
- Related commands 639
- Syntax 639
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 639
- Command mode 640
- Command usage 640
- Default setting 640
- Example 640
- Policy map 640
- Syntax 640
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 640
- Command mode 641
- Command usage 641
- Default setting 641
- Example 641
- Syntax 641
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 641
- Command mode 642
- Command usage 642
- Default setting 642
- Example 642
- Police 642
- Syntax 642
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 642
- Command mode 643
- Command usage 643
- Default setting 643
- Example 643
- Service policy 643
- Syntax 643
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 643
- Command mode 644
- Default setting 644
- Example 644
- Show class map 644
- Show policy map 644
- Syntax 644
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 644
- Command mode 645
- Example 645
- Show policy map interface 645
- Syntax 645
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 645
- Igmp snooping commands 646
- Ip igmp snooping 646
- Multicast filtering commands 646
- Syntax 646
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 646
- Command mode 647
- Default setting 647
- Example 647
- Ip igmp snooping version 647
- Ip igmp snooping vlan static 647
- Syntax 647
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 647
- Command mode 648
- Command usage 648
- Default setting 648
- Example 648
- Ip igmp snooping leave proxy 648
- Syntax 648
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 648
- Command mode 649
- Command usage 649
- Default setting 649
- Example 649
- Ip igmp snooping immediate leave 649
- Show ip igmp snooping 649
- Syntax 649
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 649
- Command mode 650
- Command usage 650
- Default setting 650
- Example 650
- Igmp query commands layer 2 650
- Show mac address table multicast 650
- Syntax 650
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 650
- Command mode 651
- Command usage 651
- Default setting 651
- Example 651
- Igmp query commands layer 2 651
- Ip igmp snooping querier 651
- Syntax 651
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 651
- Command mode 652
- Command usage 652
- Default setting 652
- Example 652
- Ip igmp snooping query count 652
- Ip igmp snooping query interval 652
- Related commands 652
- Syntax 652
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 652
- Command mode 653
- Command usage 653
- Default setting 653
- Example 653
- Ip igmp snooping query max response time 653
- Related commands 653
- Syntax 653
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 653
- Command mode 654
- Command usage 654
- Default setting 654
- Example 654
- Ip igmp snooping vlan mrouter 654
- Related commands 654
- Static multicast routing commands 654
- Syntax 654
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 654
- Command mode 655
- Command usage 655
- Default setting 655
- Example 655
- Show ip igmp snooping mrouter 655
- Syntax 655
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 655
- Command mode 656
- Command usage 656
- Default setting 656
- Exampl 656
- Igmp filtering and throttling commands 656
- Ip igmp filter global configuration 656
- Syntax 656
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 656
- Command mode 657
- Command usage 657
- Default setting 657
- Example 657
- Ip igmp profile 657
- Permit deny 657
- Syntax 657
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 657
- Command mode 658
- Command usage 658
- Default setting 658
- Example 658
- Ip igmp filter interface configuration 658
- Syntax 658
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 658
- Command mode 659
- Command usage 659
- Default settin 659
- Default setting 659
- Example 659
- Ip igmp max groups 659
- Syntax 659
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 659
- Command mode 660
- Command usage 660
- Default setting 660
- Example 660
- Ip igmp max groups action 660
- Show ip igmp filter 660
- Syntax 660
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 660
- Command mode 661
- Default setting 661
- Example 661
- Show ip igmp profile 661
- Syntax 661
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 661
- Command mode 662
- Command usage 662
- Default setting 662
- Example 662
- Show ip igmp throttle interface 662
- Syntax 662
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 662
- Command mode 663
- Default setting 663
- Multicast vlan registration commands 663
- Mvr global configuration 663
- Syntax 663
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 663
- Command usage 664
- Default settin 664
- Example 664
- Mvr interface configuration 664
- Syntax 664
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 664
- Command mode 665
- Command usage 665
- Default setting 665
- Example 665
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 665
- Command mode 666
- Command usage 666
- Default setting 666
- Example 666
- Show mvr 666
- Syntax 666
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 666
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 667
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 668
- Command mode 669
- Command usage 669
- Default setting 669
- Ip address 669
- Ip interface commands 669
- Syntax 669
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 669
- Command mode 670
- Command usage 670
- Default setting 670
- Example 670
- Ip default gateway 670
- Related commands 670
- Syntax 670
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 670
- Command mode 671
- Command usage 671
- Default setting 671
- Example 671
- Ip dhcp restart 671
- Related commands 671
- Show ip interface 671
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 671
- Command mode 672
- Default setting 672
- Example 672
- Related commands 672
- Show ip redirects 672
- Syntax 672
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 672
- Command usage 673
- Example 673
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 673
- Cli configuration 674
- Cli configuration to be continued 674
- System 674
- System information 674
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 674
- Display bridge extension capabilities 675
- Switch information 675
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 675
- Ip address configuration 676
- Manual ip configuration 676
- Sending simple mail transfer protocol alerts 676
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 676
- Using dhcp bootp 676
- Setting the system clock 677
- Setting the time zone 677
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 677
- Address table 678
- Forwarding filtering 678
- Learning 678
- Store and forward 678
- Switch operation 678
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 678
- Auto negotiation 679
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 679
- Power over ethernet overview 680
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 680
- What is poe 680
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 681
- Line detection 682
- Stages of powering up a poe link 682
- The poe provision process 682
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 682
- Classification 683
- Operation 683
- Power disconnection scenarios 683
- Start up 683
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 683
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 684
- Trouble shooting 685
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 685
- A 10 100mbps 10 100base tx 686
- A switch s rj 45 pin assignments 686
- Appendex a 686
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 686
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 687
- Appendex b glossary 688
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 688
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 689
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 690
- User s manual of sgsd 1022 sgsd 1022p sgsw 2840 sgsw 2840p 691
- Ec declaration of conformity 692
- Planet technology corporation 692
- Ec declaration of conformity 693
- Planet technology corporation 693
Похожие устройства
- Gorenje G6N4BX Инструкция по эксплуатации
- Olympus E-M5 1250 Silver Инструкция по эксплуатации
- Planet SGSW-24040 Инструкция по эксплуатации
- Gorenje G6N4BB Инструкция по эксплуатации
- Samsung ST77 Black Инструкция по эксплуатации
- Gorenje G6N4BW Инструкция по эксплуатации
- Planet SGSW-24040R Инструкция по эксплуатации
- Panasonic DMC-FS28 Black Инструкция по эксплуатации
- Planet SGSW-24040P Инструкция по эксплуатации
- Gorenje GMS64E Инструкция по эксплуатации
- Panasonic DMC-FS28 Silver Инструкция по эксплуатации
- Gorenje GMS64W Инструкция по эксплуатации
- Planet SGSW-24040P4 Инструкция по эксплуатации
- Sony DSC-WX50 Silver Инструкция по эксплуатации
- Gorenje GCW340BC Инструкция по эксплуатации
- Planet SGSW-24240 Инструкция по эксплуатации
- Nikon Coolpix L810 Blue Инструкция по эксплуатации
- Gorenje GCSW310C Инструкция по эксплуатации
- Planet SGSW-24240R Инструкция по эксплуатации
- Canon PowerShot A4050 Black Инструкция по эксплуатации