Planet GSD-802PS Инструкция по эксплуатации онлайн [63/87] 65430

User’s Manual of GSD-800S / GSD-802S / GSD-802PS

required to press the Submit button for the action to occur.

• Force Reinitialize

This button begins the re-initialization sequence on the selected port. This button

is only selectable if the control mode is 'auto'. If the button is not selectable, it will

be grayed out. Once this button is pressed, the action is immediate. It is not

required to press the Submit button for the action to occur.

• Statistics

This button redirect to the “802.1X Statistics” page on the selected port.

• Re-authenticate

All

This button begins the re-authentication sequence on the all ports.

• Force Reinitialize

All

This button begins the re-initialization sequence on all ports.

At the bottom of this page, click “Parameter” button will redirect to the “802.1X parameter” configure page. The screen

in Figure 4-46 appears.

Figure 4-46 802.1X Parameter configuration screen

The 802.1X Parameters table includes the following fields:

• Reauthentication

Enabled

This select field allows the user to enable or disable reauthentication of the

supplicant for the specified port. If “Enabled” be checked, reauthentication will

occur. Otherwise, reauthentication will not be allowed. Changing the selection will

not change the configuration until the Apply button is pressed.

The default value is not “Enabled”

• Reauthentication

Period

[1-3600 seconds]

This input field allows the user to enter the reauthentication period for the

selected port. The reauthentication period is the value, in seconds, of the timer

used by the authenticator state machine on this port to determine when

reauthentication of the supplicant takes place. The reauthentication period must

be a value in the range of 1 and 65535. Changing the value will not change the

configuration until the Apply button is pressed.

The default value is 3600.

• EAP Timeout

[1-255 seconds]

This input field allows the user to enter the EAP timeout for the selected port. The

EAP timeout is the value, in seconds, of the timer used by the authenticator state

machine on this port to timeout the supplicant. The EAP timeout must be a value

in the range of 1 and 255.

The default value is 30.