Home
Главная
Ariston
Плита
CP97SG1
Инструкция по эксплуатации Страница: 25

Ariston CP97SG1 [25/64] Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity

supply before carrying out any work on it.

Cleaning the appliance

! Never use steam cleaners or pressure cleaners on

the appliance.

• The stainless steel or enamel-coated external

parts and the rubber seals may be cleaned using

a sponge which has been soaked in lukewarm

water and neutral soap. Use specialised products

for the removal of stubborn stains. After cleaning,

rinse well and dry thoroughly. Do not use abrasive

powders or corrosive substances.

• The hob grids, burner caps, flame spreader rings

and burners may be removed to make cleaning

easier; wash them in hot water and non-abrasive

detergent, making sure all burnt-on residue is

removed before drying them thoroughly.

• Clean the terminal part of the flame failure safety

devices* frequently.

• The inside of the oven should ideally be cleaned

after each use, while it is still lukewarm. Use hot

water and detergent, then rinse well and dry with

a soft cloth. Do not use abrasive products.

• Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product,

then dry thoroughly with a soft cloth. Do not use

rough abrasive material or sharp metal scrapers

as these could scratch the surface and cause the

glass to crack.

• The accessories can be washed like everyday

crockery, and are even dishwasher safe.

! Do not close the cover when the burners are alight

or when they are still hot.

Inspecting the oven seals

Check the door seals around the oven regularly. If

the seals are damaged, please contact your nearest

Authorised After-sales Service Centre. We

recommend that the oven is not used until the seals

have been replaced.

Gas tap maintenance

Over time, the tap may become jammed or difficult

to turn. If this occurs, the tap must be replaced.

This procedure must be performed by aThis procedure must be performed by a

This procedure must be performed by a

qualified technician who has been authorised byqualified technician who has been authorised by

qualified technician who has been authorised by

the manufacturer.the manufacturer.

the manufacturer.

Replacing the oven light bulb

1. After

disconnecting the

oven from the

electricity mains,

remove the glass

lid covering the

lamp socket (

see

figure

2. Unscrew the

light bulb and

replace it with a

similar one: voltage 230 V, wattage 25 W, cap E 14.

3. Replace the lid and reconnect the oven to the

electricity supply.

Assistance

! Never use the services of an unauthorised

technician.

Please have the following information to hand:

• The type of problem encountered.

• The appliance model (Mod.).

• The serial number (S/N).

The latter two pieces of information can be found on

the data plate located on the appliance.

Care and maintenance

Ariston CP97SG1 [25/64] Care and maintenance

Содержание

Похожие устройства