Cecotec Conga 5090 Cyclone Инструкция по эксплуатации онлайн [33/90] 549076

ENGLISH

5.1. ROBOT BUTTONS

1. Auto mode

Press on the robot for it to start cleaning automatically, rst a cleaning cycle in Edge mode

and then another cycle in and organized zig zag motion, recognizing which areas it has cleaned

and which ones it has not.

The robot will plan the cleaning route automatically as it is cleaning. If during this mode the

robot is controlled manually, the robot will calculate the route again and could go through

previously cleaned areas. In order to ensure efcient cleaning, do not operate it manually

during auto mode cleaning.

Thanks to its TotalSurface 2.0 technology, if the battery is low during the cleaning cycle, the

robot will smartly return to the charging base automatically and, once it is fully charged, it will

resume the cleaning process from the same point, offering a high-efciency cleaning. During

cleaning, the robot will stop briey to evaluate the area and calculate the cleaning route (this

stop will vary depending on the house conditions).

Warning: The robot cleans in an organized way and per 4x4 m squared areas, therefore it

might leave the room where it is cleaning to nish off the delimited area. Do not worry, the

robot will clean all the accessible surface.

2. Back home mode

Press the button on the robot in order to send the robot to the charging base. This mode

can be activated during any other cleaning cycle and the robot will stop cleaning and return to

the charging automatically.

The robot will take the shortest route back to the charging base thanks to its map memorizing

and its smart back-home function.

When a cleaning cycle has been completed or the robot’s battery is low, thanks to its

TotalSurface 2.0 technology, the robot will also return to the charging base to avoid running

out of battery. Once the robot has charged, it will resume cleaning from the exact point where

it has stopped.