Cecotec Conga 5090 Cyclone Инструкция по эксплуатации онлайн [36/90] 549076

ENGLISH

out of battery. Once the robot has charged, it will resume cleaning from the exact point where

it has stopped.

Warnings:

• Remove the Wet & dry tank from the robot before charging it.

• Make sure there are no obstacles in the room being cleaned to ensure the robot can get

to the charging base without problems.

FUNCTIONS

Pause

While the robot is operating, press on the App, the remote control or on the robot to pause

it and press to resume cleaning.

Standby

The robot will automatically enter standby mode after 5 minutes of no operation. Press on

the App, the remote control or on the robot to start it up again.

Warning:

• After 12 hours of no operation, the robot will turn automatically off.

• The robot will not enter standby mode during charging.

Suction power level

Press on the remote control or on the App to select the desired power level. Choose between

Eco (low power), Medium (medium power) and Turbo (maximum power).

SCHEDULING

WARNING: The robot cannot be scheduled from more than one device at a time. Make sure to

schedule it either from the mobile phone App or from the remote control.

The robot is provided with a schedule function in order to provide a maximum-efciency

cleaning. The time settings and the cleaning schedules must be carried out from the remote

control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles

every scheduled day.

Note: Make sure the robot is activated and that the light indicator is lighted before scheduling

any cleaning or setting time.

1. Current time

1. Hold down the button for 3 seconds. The rst 2 digits, indicating the

hour, will start blinking.