Planet XRT-401D [39/62] Virtual server

only or select “both” to forward both “TCP” and

“UDP” packets.

Port Range The range of ports to be forward to the private IP.

Comment The description of this setting.

Add Port Forwarding into the table Fill in the "Private IP", “Type”, “Port Range” and

"Comment" of the setting to be added and then

click "Add". Then this Port Forwarding setting

will be added into the "Current Port Forwarding

Table" below. If you find any typo before adding

it and want to retype again, just click "Clear" and

the fields will be cleared.

Remove Port Forwarding into the table If you want to remove some Port Forwarding

settings from the " Current Port Forwarding

Table", select the Port Forwarding settings you

want to remove in the table and then click

"Delete Selected". If you want remove all Port

Forwarding settings from the table, just click

"Delete All" button. Click "Reset" will clear your

current selections.

Click <Apply> at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the router (with the advance settings in place)

3.4.2 Virtual Server

Use the Virtual Server function when you want different servers/clients in your LAN to handle

different service/Internet application type (e.g. Email, FTP, Web server etc.) from the Internet.

Computers use numbers called port numbers to recognize a particular service/Internet application

type. The Virtual Server allows you to re-direct a particular service port number (from the

Internet/WAN Port) to a particular LAN private IP address and its service port number. (See

Glossary for an explanation on Port number)