Planet ISW-800M [17/57] Network installation

3. NETWORK INSTALLATION

3.1 Hardware Installation

In this paragraph, we will describe how to install the 8-Port 10/100TX with redundant ring Web

management industrial switch and the installation points for attention.

1. Unpacked the Industrial switch.

2. Check the DIN-Rail is screwed on the Industrial switch. If the DIN-Rail is not screwed on the

Industrial switch. Please refer to DIN-Rail Mounting section for DIN-Rail installation. If you want to

wall mount the Industrial switch, then please refer to Wall Mount Plate Mounting section for wall

mount plate installation.

3. To hang the Industrial switch on the DIN-Rail track or wall, please refer to the Mounting Installation

section.

4. Power on the Industrial switch. How to wire the power; please refer to the Wiring the Power Inputs

section. The power LED on the Industrial switch will light up. Please refer to the LED Indicators

section for meaning of LED lights.

5. Prepare the twisted-pair, straight through Category 5 cable for Ethernet connection.

6. Insert one side of Category 5 cables into the Industrial switch Ethernet port (RJ-45 port) and

another side of category 5 cables to the network devices' Ethernet port (RJ-45 port), ex: switch, PC

or Server. The UTP port (RJ-45) LED on the Industrial switch will light up when the cable connected

with the network device. Please refer to the LED Indicators section for LED light meaning.

[NOTE] Be sure the connected network devices support MDI/MDI-X. If it does not support then use the

crossover category 5 Cable.

7. When all connections are all set and LED lights all show in normal, the installation is complete.

3.2 Network Application

This chapter provides some sample applications to help user to have more actual idea of

industrial switch function application. The following figure is a sample application of the

industrial switch.