Grundig GIEI 624410 X [34/52] Installation and connection

Содержание

Похожие устройства

Installation and connection The product must be installed in accordance with all local gas and electrical regulations H DANGER Before starting any work on the electrical installation disconnect the product from the mains supply There is the risk of electric shock O not install the hob on places with sharp dges or corners here Is the risk of breaking for glass Connecting the power cable eramic surface 1 If it is not possible to disconnect all poles in the supply power a disconnection unit with Electrical connection at least 3 mm contact clearance fuses line Connect the product to a grounded outlet line safety switches contactors must be protected by a fuse of suitable capacity as stated connected and all the poles of this in the Technical specifications table Have the disconnection unit must be adjacent to not grounding installation made by a qualified above the product in accordance with IEE electrician while using the product with or directives Failure to obey this instruction without a transformer Our company shall not be may cause operational problems and liable for any damages that will arise due to invalidate the product warranty using the product without a grounding installation Additional protection by a residual current circuit in accordance with the local regulations breaker is recommended DANGER If a cable is supplied with the product The product must be connected to the mains supply only by an authorised and qualified person The product s warranty period starts only after correct installation Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons B DANGER The power cable must not be clamped bent or trapped or come into contact with hot parts of the product A damaged power cable must be replaced by a qualified electrician Otherwise there is risk of electric shock short circuit or fire Connection must comply with national regulations The mains supply data must correspond to the data specified on the type label of the product Type label is at the rear housing of the product Power cable of your product must comply with the values in Technical specifications table B 10 EN 12N AC 380 415 V 11N AC 220 240 V 2 For single phase connection connect the wires as identified below Brown Black cable L Phase Blue Grey cable N Neutral Green yellow cable E Ground Installing the product___________________ lf it is possible to touch the bottom of the L 1 Jproduct since It Is installed onto a drawer imhis section must be covered with a wooden plate

Скачать