LG T9PETNBEDRS [12/48] Using the hose handle

LG T9PETNBEDRS [12/48] Using the hose handle
12
Using the Hose Handle
1
Install the AAA battery provided with the product
in the hose handle before using the product.
•
Check the correct direction (+, -) of the battery.
2
If the battery needs to be replaced while in use, the
main unit power will be turned off and RoboSense
lamp will ash on top of the main unit. At this time,
replace the battery of the hose handle.
Main unit is off
3
You can control suction power strength by stage
or turn RoboSense on or off, using the hose handle
button.
2
1
1
Power on/off button
•
If the product is turned on, the produce will run
in standard mode and RoboSense on.
2
Strength adjustment button
•
If you press the “+” button, the mode will change
from Standard
Strong.
•
If you press the “+” more than 3 seconds, turbo
mode will be engaged. However, you cannot dir
-
ectly switch from standard mode to turbo mode.
You can use maximum suction power when
RoboSense is turned off.
•
If you press the “-” button, all modes will change
to standard mode.
•
If you press the “-” button more than 3 seconds,
you can turn RoboSense on or off. However,
the mode will change to standard mode when
turning RoboSense on or off.
NOTE
•
The battery level LED on the upper side of the product
will ash for the user to check the battery level when
-
ever the power is turned on.
•
Do not keep the battery at a place with heaters or
heat.
•
Do not kick or apply strong shock to the hose.
Product use time by strength (based on the
fully-charged battery)
•
Normal mode: About 40 minutes
•
Power mode: About 30 minutes
•
Turbo mode: About 10 minutes
1 MFL69727402_en_180316.indd 12 2018-03-15 오전 10:35:53

Содержание

Похожие устройства

Скачать