LG T9PETNBEDRS [14/48] Using smart functions

LG T9PETNBEDRS [14/48] Using smart functions
14
Using Smart Functions
Avoiding obstacles
The cleaner minimizes collision with nearby obstacles as
much as possible using four laser sensors attached at
both front side of the cleaner main unit.
•
The obstacle avoiding function is available for some
models only.
•
Performance may be degraded if dust gathers on the
laser sensor window. Wipe dust with a cotton swab.
•
Be careful that the cleaner can collide with the thin
desk leg, door, or obstacle lower than 30cm.
•
The obstacle may not be detected because there can
be a blind spot in the sensing area.
•
The backing-up function is available to escape when
collided with an obstacle in a blind spot.
•
This product is a Class I laser device of which conform-
ity assessment is conducted in accordance with the
IEC 60825-1.
Sensing
area
Sensing
area
Blind spot
Laser sensor
window
Cotton swab
RoboSense (automatic moving function)
The cleaner automatically follows the user if the cleaner
is away more than 1 meter while cleaning, using the gyro
sensor and radio frequency (RF) sensor integrated in the
cleaner main unit.
•
RoboSense is available for some models only.
Transmitter
sensor
About 1 m
Note
•
If you press the "-" button for 3 seconds, you can turn
RoboSense on or off.
•
If RoboSense is on, the blue RoboSense LED on the
top of the main body will be turned on.
•
If RoboSense is off, the blue RoboSense LED on the
top of the main body will be turned off.
CAUTION
•
Be careful that the cleaner can collide with a thin
desk leg.
CAUTION
•
Be careful that the cleaner can collide with a door.
1 MFL69727402_en_180316.indd 14 2018-03-15 오전 10:35:55

Содержание

Похожие устройства

Скачать