![Icom IC-T70E [38/96] Memory channel programming](/img/pdf.png)
Icom IC-T70E [38/96] Memory channel programming
![Icom IC-T70A [38/96] Memory channel programming](/views2/1074089/page38/bg26.png)
31
6
MEMORY/CALL CHANNELS
New2001 New2001
q Push [V/M/C] to select the VFO mode.
w
Set a desired frequency:
➥ Push [BAND] to select a desired band.
➥ Rotate [DIAL] to set a desired frequency.
➥
Push the keypad keys directly to set a desired fre-
quency. In this case, setting the band and frequency
using [BAND] and [DIAL] are not required.
➥
Set other data (e.g. frequency offset, duplex direction,
tone squelch, etc.), if desired.
e
Push and hold [S.MW](V/M/C) for 1 sec. to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The “
” icon and memory channel number blink.
r Rotate [DIAL] to select a desired channel.
• Call channels (C0, C1), VFO and scan edge channels (0A/0b
to 24A/24b), as well as regular memory channels, can be pro-
grammed in this way.
t Push and hold [S.MW](V/M/C) for 1 sec. to program.
• 3 beeps sound.
• Memory channel number automatically increases when continu-
ing to push [S.MW](V/M/C) for 1 sec. after programming.
NOTE: Push [H/M/L] to cancel the program and exit the
select memory write mode before memory programming is
finished.
[DIAL]
The VFO mode Enter the select memory write mode.
to select channel 11.Rotate
Push and hold for 1 sec.
Return to the VFO mode.
Push and hold for 1 sec. to program.
[EXAMPLE]: Programming 145.440 MHz into memory channel 11 (a blank channel).
Channel 11
■
Memory channel programming
Содержание
- Instruction manual 1
- It70a it7 1
- New2001 1
- 70 0 mw af power with btl bridge tied load amplifier 2
- Built in vox circuit enabling the vox opera tion voice operated transmission 2
- Dust protection splash resistant construc tion ip54 2
- Explicit definitions 2
- Features 2
- Foreword 2
- Important 2
- Read all instruction 2
- Save this instruction manual 2
- Be careful 3
- Do not 3
- Precautions 3
- R warning neve 3
- R warning rf exposure 3
- Caution 4
- Fcc information 4
- For class b unintentional radiators 4
- Precautions 4
- Supplied accessories 5
- New2001 new2001 6
- Table of contents 6
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 7
- New2001 7
- Table of contents 7
- Accessory attachment 8
- Belt clip 8
- Hand strap 8
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 9
- Accessory attachment 9
- Antenna 9
- Battery pack 9
- Front top and side panels 10
- Panel description 10
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 11
- D keypad 11
- Panel description 11
- Panel description 12
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 13
- Function display 13
- Panel description 13
- Y t r q w e 13
- Panel description 14
- Battery charging 15
- Cautio 15
- For the supplied bp 264 ni mh battery pack 15
- Battery charging 16
- Cautio 16
- D battery caution 16
- For the optional bp 265 li ion battery pack 16
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 17
- Battery charging 17
- D charging caution 17
- Battery charging 18
- Battery information 18
- D battery life 18
- Optional battery case bp 263 18
- Battery charging 19
- D battery icons 19
- D charging note 19
- Regular charging 19
- Battery charging 20
- Bc 191 20
- D charging note 20
- D rapid charging with the 20
- Desktop battery chargers 20
- Battery charging 21
- D rapid charging with 21
- The bc 193 21
- Battery charging 22
- D operating note 22
- External dc power operation 22
- Basic operation 23
- Power on 23
- Setting audio volume 23
- Basic operation 24
- Monitor function 24
- Setting the squelch level 24
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 25
- Basic operation 25
- D call channel mode 25
- D memory mode 25
- D vfo mode 25
- D weather channel mode 25
- Selecting the mode 25
- Basic operation 26
- D tuning step selection 26
- D using the dial 26
- Setting the frequency 26
- Setting the tuning step 26
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 27
- Basic operation 27
- D using the keypad 27
- Basic operation 28
- Key lock function 28
- Operating mode selection 28
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 29
- Basic operation 29
- Receiving 29
- Transmit power selection 29
- Basic operation 30
- Transmitting 30
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 31
- Repeater and duplex operations 31
- Repeater operation 31
- D checking the repeater input signal 32
- D off band indication 32
- Repeater and duplex operations 32
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 33
- D setting duplex direction 33
- D setting frequency offset 33
- Duplex operation 33
- Repeater and duplex operations 33
- Reverse duplex function 33
- 00 440 00 mhz dup appears 34
- Auto repeater function 34
- D frequency range and offset direction 34
- Frequency range shift direction 34
- Repeater and duplex operations 34
- 1750 hz tone 35
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 35
- Repeater and duplex operations 35
- D memory channel contents 36
- General description 36
- Memory call channels 36
- Selecting a call channel 36
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 37
- D using dial 37
- D using the numeral keys 37
- Memory call channels 37
- Selecting a memory channel 37
- Memory call channels 38
- Memory channel programming 38
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 39
- Memory bank setting 39
- Memory call channels 39
- Memory bank selection 40
- Memory call channels 40
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 41
- D usable characters 41
- Memory call channels 41
- Programming memory bank scan name 41
- During memory mode operation either the programmed memory name or bank name can be displayed 42
- E push to return to the frequency display 42
- Example programming the bank name vhf into the 42
- Memory call channels 42
- New2001 42
- Programming memory bank scan name continued 42
- Q while continuing to push set turn the power on to enter the initial set mode w rotate dial to select the memory name item then rotate vol to set the memory name display option 42
- Scan edge channel 1a 42
- Selecting memory bank name indication 42
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 43
- Display type 43
- Memory call channels 43
- Copying memory call contents 44
- D memory call memory call 44
- D memory call vfo 44
- Memory call channels 44
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 45
- Memory call channels 45
- Memory clearing 45
- Erasing transferring bank contents 46
- Memory call channels 46
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 47
- Scan operation 47
- Scan types 47
- All selected bank sca 48
- Band memory skip sca 48
- Bank link sca 48
- Duplex sca 48
- Memory skip sca 48
- Scan operation 48
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 49
- Full band programmed scan 49
- Scan operation 49
- Scan edges programming 50
- Scan operation 50
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 51
- Memory scan 51
- Scan operation 51
- Memory bank scan 52
- Scan operation 52
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 53
- Scan operation 53
- Skip channel frequency setting 53
- D scan pause timer 54
- D scan resume timer 54
- Scan operation 54
- Scan resume setting 54
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 55
- Priority watch 55
- Priority watch types 55
- D memory call channel and memory scan watch 56
- Priority watch 56
- Priority watch operation 56
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 57
- D vfo scan watch 57
- Priority watch 57
- D entering and using the initial set mode 58
- D entering and using the set mode 58
- General 58
- Set modes 58
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 59
- Initial set mode item list 59
- Set mode item list 59
- Set modes 59
- Available dtcs codes 60
- Available subaudible tone frequencies 60
- D dtcs code code 60
- D dtcs polarity dtcs p 60
- D repeater tone frequency r tone 60
- D tsql frequency c tone 60
- New2001 new2001 60
- Selects one of 104 dtcs both encoder decoder codes 60
- Selects one of 50 subaudible tone frequencies used to ac cess the repeaters 60
- Selects one of the tone frequencies for tone squelch or the pocket beep function 60
- Set mode items 60
- Set modes 60
- The dtcs code s polarity for transmitting or receiving can be independently set by this item 60
- The transceiver has 50 tone frequencies and conse quently their spacing is narrow compared with units hav ing 38 tones therefore some tone frequencies may re ceive interference from adjacent tone frequencies 60
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 61
- D frequency offset offset 61
- D operating mode mode 61
- D reverse duplex function dup rev 61
- D tuning step ts 61
- D weather alert wx alt 61
- Set modes 61
- Activates priority watch or priority watch with priority beep default off 62
- D priority watch prio 62
- D program skip scan p skip 62
- D scan pause timer pause 62
- D scan resume timer resume 62
- New2001 new2001 62
- Selects the scan pause time when receiving signals the scan pauses according to the scan pause timer default 10 62
- Selects the scan resume time of a pause after the received signal disappears default 2 62
- Set modes 62
- The scan resume timer must be set shorter than the scan pause timer previous item otherwise this timer will not be activated 62
- Turns the programmed skip scan function on or off for a vfo scan operation full scan programmed scan etc default on 62
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 63
- D memory bank link function b link 63
- D program scan link function p link 63
- Set modes 63
- Set modes 64
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 65
- D dtmf memory dtmf 65
- D dtmf tx key dtmf t 65
- D microphone gain mic g 65
- D vox function vox vox 65
- D vox gain vox lv vox lv 65
- Set modes 65
- D auto power off ap off 66
- D microphone simple mode mic s 66
- D vox delay vox dly 66
- D vox time out timer voxtot 66
- Initial set mode items 66
- Set modes 66
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 67
- D auto repeater autorp 67
- D beep output level beeplv 67
- D display backlighting light 67
- Korean version 67
- New2001 67
- Set modes 67
- The auto repeater function automatically turns the duplex op eration and tone encoder on or off the offset and repeater tone settings are not changed by the auto repeater function reset these frequencies if necessary 67
- The transceiver has a display backlighting with a 5 second timer for night time operation the display backlighting can be turned on continuously or turned off default auto1 67
- Turns the key touch beep on or off sets the beep sound level to between 1 and 9 default 4 67
- U s a and korean versions only 67
- U s a version 67
- D dtmf speed dtmf s 68
- D power save p save 68
- D voltage indication volt 68
- New2001 68
- Note power save function is disabled when using an ex ternal power supply more than 10 v dc 68
- Select the desired dtmf transmission speed from 100 200 300 or 500 msec default 100 68
- Set modes 68
- The power save function allows you conserve battery life by selecting the duty cycle of the receiver select the ratio of the power save time to the standby time default auto 68
- The power voltage battery voltage or external power supply voltage is displayed at power on this setting can be turned on or off default on 68
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 69
- D busy lockout lk out 69
- D lcd contrast cont 69
- D ptt lock ptt lk ptt lock ptt lk 69
- D squelch delay sql dl 69
- D time out timer tot 69
- Set modes 69
- D dial speed acceleration dial s 70
- D memory name name 70
- D monitor key action moni 70
- D scan name s name 70
- Set modes 70
- Other functions 72
- Programming a dtmf code sequence 72
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 73
- D manual dtmf code transmission 73
- Other functions 73
- Transmitting a dtmf code sequence 73
- D 1750 hz tone 74
- D using a dtmf memory channel 74
- Other functions 74
- Setting dtmf transfer speed 74
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 75
- D pocket beep 75
- D reverse tone dtcs squelch 75
- D setting subaudible tones for tone squelch 75
- D tone and dtcs squelches 75
- Other functions 75
- Tone frequency and dtcs code 75
- D setting dtcs code for dtcs squelch 76
- D setting dtcs polarity 76
- Other functions 76
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 77
- Other functions 77
- Tone dtcs squelch 77
- Other functions 78
- Tone scan 78
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 79
- D weather alert function 79
- D weather channel selection 79
- Other functions 79
- Weather channel operation 79
- Other functions 80
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 81
- Cloning function 81
- Other functions 81
- All reset 82
- D all reset 82
- D partial reset 82
- Other functions 82
- Partial reset 82
- Resetting 82
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 83
- Problem possible cause solution ref 83
- Troubleshooting 83
- D general 84
- D receiver 84
- D transmitter 84
- New2001 new2001 84
- Specifications 84
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 85
- Options 85
- Options 86
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 87
- D optional unit connection 87
- D turning the vox function on or off 87
- Options 87
- Vox function 87
- D vox related settings 88
- Options 88
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 89
- Remote control function 89
- Important 90
- List of country codes iso 3166 1 90
- Declaration of conformity 91
- New2001 92
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 93
- New2001 93
- New2001 94
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 95
- New2001 95
- 02 eur 96
- 1 32 kamiminami hirano ku osaka 547 0003 japan 96
- 12 rsp 96
- 2010 icom inc 96
- A 6808h 1ex q printed in japan 96
- New2001 96
Похожие устройства
- Zota MK 7.5 Инструкция по эксплуатации
- Lenovo IdeaPad B570e 59328742 Инструкция по эксплуатации
- Icom IC-V80 Инструкция по эксплуатации
- Zota MK 9 Инструкция по эксплуатации
- Asus X54C-SX399O B815 Инструкция по эксплуатации
- Icom IC-V80E Инструкция по эксплуатации
- Zota MK 12 Инструкция по эксплуатации
- Asus K53E B960 2G 320G Инструкция по эксплуатации
- Icom IC-V80 Sport Инструкция по эксплуатации
- Zota MK 15 Инструкция по эксплуатации
- Lenovo IdeaPad V570c 59319588 Инструкция по эксплуатации
- Icom IC-V82 Инструкция по эксплуатации
- Zota MK 18 Инструкция по эксплуатации
- Acer TravelMate TM5744 Инструкция по эксплуатации
- Icom IC-U82 Инструкция по эксплуатации
- Zota MK 21 Инструкция по эксплуатации
- Samsung NP-RV515-S07RU Инструкция по эксплуатации
- Icom ID-5100A Инструкция по эксплуатации
- Zota MK 24 Инструкция по эксплуатации
- HP Pavilion g6-1315sr Инструкция по эксплуатации
Скачать
Случайные обсуждения