Icom IC-M34 [16/36] I receiving and transmitting

Icom IC-M34 [16/36] I receiving and transmitting
10
4 BASIC OPERATION
Receiving and transmitting
CAUTION: Transmitting without an antenna will damage
the transceiver.
q Push and hold [PWR] to turn power ON.
w Set the audio and squelch levels.
Push [SQL], and push [
ZZ
] several times to open the squelch.
Push [VOL], then push [
YY
]/[
ZZ
] to adjust the volume level.
Push [SQL], and push [
YY
] until the noise disappears.
e Push [
YY
]/[
ZZ
] to select the desired channel.
When receiving a signal, “” appears and audio is emitted
from the speaker.
Further adjustment of the audio may be necessary at this point.
r Push [H/L] to select the output power if necessary.
LOW appears when low power is selected; no indication when
high power is selected.
Choose low power to conserve battery power, choose high
power for longer distance communications.
Some channels are for low power only.
t Push and hold [PTT] to transmit, then speak into the
microphone.
“” appears.
Channel 70 cannot be used for transmission.
y Release [PTT] to receive.
IMPORTANT: To maximize the readability of your trans-
mitted signal, pause a few sec. after pushing [PTT], hold
the microphone 2 to 4 inches (5 to 10 cm) from your mouth
and speak into the microphone at a normal voice level.
NOTE: The transceiver has a power save function to con-
serve the battery power. The power save function activates
automatically when no signal is received for 5 sec.
For U.S.A version: To prevent accidental prolonged trans-
mission, etc., the IC-M34 has a time-out timer function.
This timer cuts a transmission OFF after 5 min. of continu-
ous transmission.
Microphone
r Set output
power
q Power ON
w Set the
squelch level
w Set volume
t Push to
transmit
y Release to
receive
e Set channel
Set the squelch
and volume level.
w

Содержание