![Daikin ATX25J2V1B [4/28] Read before operation](/img/pdf.png)
Daikin ATX25J2V1B [4/28] Read before operation
![Daikin ATX25J2V1B [4/28] Read before operation](/views2/1746307/page4/bg4.png)
2
READ BEFORE OPERATION
Safety precautions
• Keep this manual where the operator can easily find it.
• Read this manual attentively before starting up the unit.
• This appliance is intended to be used by expert or trained users in shops, in light industry and on
farms, or for commercial and household use by lay persons.
• For safety reason the operator must read the following cautions carefully.
• This manual classifies precautions into WARNING and CAUTION. Be sure to follow all precautions
below: they are all important for ensuring safety.
WARNING
• In order to avoid fire, explosion or injury, do not operate the unit when harmful gases
(e.g. flammable or corrosive) are detected near the unit.
• It is not good for health to expose your body to the air flow for a long time.
• Do not put a finger, a rod or other objects into the air outlet or inlet. As the fan is rotating at
a high speed, it will cause injury.
• Do not attempt to repair, relocate, modify or reinstall the air conditioner by yourself. Incorrect work
will cause electric shocks, fire etc.
For repairs and reinstallation, consult your Daikin dealer for advice and information.
•
The refrigerant used in the air conditioner is safe. Although leaks should not occur, if for
some reason any refrigerant happens to leak into the room, make sure it does not come in
contact with any flame as of gas heaters, kerosene heaters or gas range.
•
If the air conditioner is not cooling (heating) properly, the refrigerant may be leaking, so call your dealer.
When carrying out repairs accompanying adding refrigerant, check the content of the repairs with our service staff.
•
Do not attempt to install the air conditioner by yourself. Incorrect work will result in water leakage, electric shocks or fire.
For installation, consult the dealer or a qualified technician.
• In order to avoid electric shock, fire or injury, if you detect any abnormally such as smell of fire, stop
the operation and turn off the breaker. And call your dealer for instructions.
• Depending on the environment, an earth leakage breaker must be installed. Lack of an earth
leakage breaker may result in electric shocks or fire.
• The air conditioner must be earthed. Incomplete earthing may result in electric shocks. Do
not connect the earth line to a gas pipe, water pipe, lightning rod, or a telephone earth line.
CAUTION
• In order to avoid any quality deterioration, do not use the unit for cooling precision
instruments, food, plants, animals or works of art.
• Never expose little children, plants or animals directly to the air flow.
WARNING
If you do not follow these instructions exactly, the unit may
cause property damage, personal injury or loss of life.
CAUTION
If you do not follow these instructions exactly, the unit may
cause minor or moderate property damage or personal injury.
Never do. Be sure to follow the instructions.
Be sure to earth the air conditioner.
Never cause the air conditioner (including the remote
controller) to get wet.
Never touch the air conditioner (including the remote
controller) with a wet hand.
3PEN291652-2E.book Page 2 Wednesday, February 8, 2017 10:13 AM
Содержание
- Operation manual 1
- Blank page 2
- Contents 3
- Operation 3
- Read before operation 3
- Troubleshooting 3
- Caution 4
- Read before operation 4
- Safety precautions 4
- Warning 4
- Consider nuisance to your neighbours from noises 5
- Electrical work 5
- Installation site 5
- System relocation 5
- Names of parts 6
- Indoor unit 7
- Outdoor unit 7
- Arc433a8 8
- Remote controller 8
- Attention 9
- Preparation before operation 9
- To set the batteries 9
- Attention 10
- Choose a place from where the signals reach the unit 10
- Fix the holder to a wall a pillar or similar location with the screws procured locally 10
- Place the remote controller in the remote controller holder 10
- Preparation before operation 10
- To fix the remote controller holder on the wall 10
- To operate the remote controller 10
- Be careful not to cool heat the room too much keeping the temperature setting at a moderate level helps save energy 11
- Clogged air filters cause inefficient operation and waste energy clean them once in about every two weeks 11
- Cover windows with a blind or a curtain blocking sunlight and air from outdoors increases the cooling heating effect 11
- If you are not going to use the air conditioner for a long period for example in spring or autumn turn the breaker off 11
- Mode fan 11
- Operation 11
- Pen291652 2e book page 9 wednesday february 8 2017 10 13 am 11
- Press clock button 11
- Press timer setting button to set the clock to the present time 11
- The air conditioner always consumes 15 35 watts of electricity even while it is not operating 11
- To set the clock 11
- Turn the breaker on 11
- Use the air conditioner in the following conditions operation outside the humidity or temperature range described in the table may cause a safety device to disable the system 11
- Auto dry cool heat fan operation 12
- Press mode selector button and select an operation mode 12
- Press on off button 12
- Press on off button again 12
- Press temperature adjustment button 12
- To change the temperature setting 12
- To start operation 12
- To stop operation 12
- Press fan setting button 13
- To change the airflow rate setting 13
- Adjusting the airflow direction 14
- Press swing button 14
- To adjust the horizontal blade flap 14
- To adjust the vertical blades louvers 14
- When the flap has reached the desired position press swing button once more 14
- Notes on comfort airflow operation 15
- Notes on flaps and louvers angles 15
- Press comfort airflow button 15
- Press comfort airflow button again 15
- To cancel comfort airflow operation 15
- To start comfort airflow operation 15
- Powerful operation 16
- To cancel powerful operation 16
- To start powerful operation 16
- Econo operation 17
- To cancel econo operation 17
- To start econo operation 17
- Timer operation 18
- To cancel the off timer operation 18
- To use off timer operation 18
- Attention 19
- Press cancel button 19
- Press on timer button 19
- Press on timer button again 19
- Press timer setting button until the time setting reaches the point you like 19
- To cancel on timer operation 19
- To combine on timer and off timer 19
- To use on timer operation 19
- Attach the front panel 20
- Before cleaning be sure to stop the operation and turn the breaker off 20
- Care and cleaning 20
- Caution 20
- Front panel 20
- Indoor unit outdoor unit and remote controller 20
- Open the front panel 20
- Remove the front panel 20
- Wipe them with dry soft cloth 20
- Air filter 21
- Clean or replace each filter 21
- Filters 21
- Open the front panel page 18 21
- Pull out the air filters 21
- Set the air filter and titanium apatite deodorizing filter as they were and close the front panel 21
- Take off the titanium apatite deodorizing filter 21
- Titanium apatite deodorizing filter 21
- Wash the air filters with water or clean them with vacuum cleaner 21
- Before a long idle period 22
- Maintenance 22
- Replacement 22
- Case explanation 23
- These cases are not troubles 23
- Troubleshooting 23
- Call the service shop immediately 24
- Case check 24
- Check again 24
- The power cord is abnormally hot or damaged an abnormal sound is heard during operation the safety breaker a fuse or the earth leakage breaker cuts off the operation frequently a switch or a button often fails to work properly there is a burning smell water leaks from the indoor unit 24
- Turn the breaker off and call the service shop 24
- Warning 24
- Disposal requirements 25
- Important information regarding the refrigerant used 25
- We recommend periodical maintenance 25
- A short beep and two consecutive beeps indicate non corresponding codes 26
- Fault diagnosis 26
- Fault diagnosis by remote controller 26
- In the arc433 series the temperature display sections on the main unit indicate corresponding codes 26
- Press the timer cancel button repeatedly until a continuous beep is produced the code indication changes as shown below and notifies with a long beep 26
- To cancel the code display hold the timer cancel button down for 5 seconds the code display also cancel itself if the button is not pressed for 1 minute 26
- When the timer cancel button is held down for 5 seconds a indication flashes on the temperature display section 26
Похожие устройства
- Daikin ATX25J2V1B Инструкция по монтажу
- Daikin ATX35J2V1B Сервис мануал
- Daikin ATX35J2V1B Инструкция по эксплуатации
- Daikin ATX35J2V1B Инструкция по монтажу
- Daikin ATX20J3V1B Сервис мануал
- Daikin ATX20J3V1B Инструкция по эксплуатации
- Daikin ATX20J3V1B Инструкция по монтажу
- Daikin ATX25J3V1B Сервис мануал
- Daikin ATX25J3V1B Инструкция по монтажу
- Daikin ATX25J3V1B Инструкция по эксплуатации
- Daikin ATX35J3V1B Сервис мануал
- Daikin ATX35J3V1B Инструкция по монтажу
- Daikin ATX35J3V1B Инструкция по эксплуатации
- Daikin FTX20K5V1B Инструкция по эксплуатации
- Daikin FTX20K5V1B Инструкция по монтажу
- Daikin FTX20K2V1B Инструкция по эксплуатации
- Daikin FTX20K2V1B Инструкция по монтажу
- Daikin FTX25K5V1B Инструкция по эксплуатации
- Daikin FTX25K5V1B Инструкция по монтажу
- Daikin FTX25K2V1B Инструкция по эксплуатации