Icom IC-R2 [18/40] I memory bank selection

MEMORY CHANNELS

■ Memory bank selection

The receiver has 400 memory channels in 8 banks for stor-

age of often-used frequencies.

q Select memory mode with [V/M].

w Rotate [DIAL] while pushing [FUNC] to select the desired

memory banks.

•“1” – “3” indicate memory banks 1 to 3; “♦” indicates memory

bank 4; “♦1” – “♦3” indicate memory banks 5 to 7; no bank indi-

cator indicates memory bank 0.

e Rotate [DIAL] to select the desired memory channel.

■ Memory clear

Unwanted memory channels can be cleared (erased). Before

clearing a memory channel make sure it is no longer needed

as cleared memories cannot be recalled.

q Select memory mode with [V/M].

w Set the memory channel to be cleared with [DIAL].

•Rotate [DIAL] while pushing [FUNC] to select a memory bank or

programmed scan edge channel.

e Select VFO mode with [V/M] and push [FUNC] + [(V/M)MW]

momentarily to indicate the selected memory channel.

•Do not hold [FUNC] + [(V/M)MW] for more than 0.5 sec., other-

wise the selected memory channel will be overwritten.

r Push [FUNC] + [(MODE)LOCK] for 2 sec. to clear the se-

lected memory channel.

•3 beeps sound, then the frequency is cleared.

t Push [V/M] to return to VFO mode.

Select memory

channel

for 2 sec.

FUNC

momentarily

FUNC

V/M MW V/M MW

V/M MW

MODE LOCK

[EXAMPLE]: Clearing memory channel 3 (memory bank 0).

Memory bank 0 Memory bank 1 Memory bank 7