![Icom IC-R2 [38/40] Specifications and options](/img/pdf.png)
Icom IC-R2 [38/40] Specifications and options
![Icom IC-R2 [38/40] Specifications and options](/views2/1074698/page38/bg26.png)
34
13
SPECIFICATIONS AND OPTIONS
D General
•Frequency coverage : (unit: MHz)
U.S.A. version 0.495–823.995, 849–868.995,
894–1309.995
Non-U.S.A. versions 0.495–1309.995
•Mode : FM, AM, WFM
•No. of memory channels : 450
(400 regular, 50 scan edges)
•Usable temp. range : –10°C to +60°C;
+14°F to +140°F
•Tuning steps : 5, 6.25, 9,* 10, 12.5, 15, 20,
25, 30, 50 and 100 kHz
*Fixed tuning step while 0.495–1.620 MHz is selected except
for U.S.A. and Canada versions.
•Frequency stability : ±6 ppm (–10°C to +60°C)
•Power supply requirement : 2 AA(R6) Ni-Cd or
(negative ground) alkaline cells
•Current drain
(at 3.0 V DC) :
Rated audio 170 mA typ.
Standby 100 mA typ.
Power saved 41 mA typ.
•Antenna connector : SMA (50 Ω)
•Dimensions : 58(W)×86(H)×27(D) mm;
(projections not included) 2
9
⁄32(W)×3
3
⁄8(H)×1
1
⁄16(D) in
•Weight : 170 g; 6 oz
(w/antenna and battery)
DReceiver
•Receive system : Triple-conversion
superheterodyne
•Intermediate frequencies : 1st 266.7 MHz
2nd 19.65 MHz
3rd 450 kHz
•Sensitivity
(except spurious points; typical):
FM 1.625–5.000 MHz 0.4 µV
(at 12 dB SINAD) 5.005–29.995 MHz 0.25 µV
30–117.995 MHz 0.2 µV
118–174.995 MHz 0.18 µV
175–329.995 MHz 0.22 µV
330–429.995 MHz 0.25 µV
430–450 MHz 0.22 µV
450.005–469.995 MHz
0.25 µV
470–999.995 MHz 0.28 µV
1000–1309.995 MHz 0.45 µV
WFM 76–108.0 MHz 0.71 µV
(at 12 dB SINAD) 175–221.995 MHz 0.71 µV
470–770.0 MHz 1.0 µV
AM
(at 10 dB S/N) 0.495–5.0 MHz 1.3 µV
5.005–30.0 MHz 0.79 µV
118–136.0 MHz 0.63 µV
222–246.995 MHz 0.63 µV
247–329.995 MHz 0.71 µV
Содержание
- Communications receiver 1
- Instruction manual 1
- Caution 2
- Cautions 2
- Explicit definitions 2
- Foreword 2
- R warning neve 2
- Read all instruction 2
- Save this instruction manual 2
- Operating notes 3
- Operating theory 3
- Supplied accessories 3
- Table of contents 4
- Accessory attachment 5
- D antenna 5
- D battery installation 5
- D belt clip 5
- D handstrap 5
- I panel description 6
- Panel description 6
- Panel description 7
- I function display 8
- Panel description 8
- Panel description 9
- Frequency and channel setting 10
- I operating band selection 10
- I vfo and memory channels 10
- D using set mode 11
- D using the ts switch 11
- Frequency and channel setting 11
- I setting a frequency 11
- I setting a tuning step 11
- Frequency and channel setting 12
- I attenuator function 12
- I lock function 12
- I selecting a memory channel 12
- Lock to toggle the lock function on and off 12
- Q push v m to select memory mode 12
- The attenuator has approx 10 db attenuation push func sql to toggle the attenuator function on and off 12
- The attenuator prevents a desired signal from distorting when very strong signals are near the desired frequency or when very strong electric fields such as from a broadcasting sta tion are near your location 12
- The lock function prevents accidental frequency changes and accidental function access push func 12
- W rotate dial to change the indi cated memory channel 12
- Basic operation 13
- E set an operating frequency pgs 6 7 r set the squelch level 13
- I receiving 13
- Make sure charged ni cd or alkaline batteries are installed p 1 13
- Q push power for 2 sec to turn power on w push vol y or vol z to set the desired audio level 13
- T when a signal is received 13
- Audio level indication 14
- Basic operation 14
- I monitor function 14
- I setting squelch level 14
- I setting volume level 14
- The audio level can be adjusted through 32 levels push vol y or vol z to set the desired audio level 14
- The sql switch can be set to sticky operation in ex panded set mode p 27 14
- The squelch circuit mutes the received audio signal depend ing on the signal strength the receiver has 9 squelch levels a continuously open setting and an automatic squelch setting 14
- This function is used to listen to weak signals or to open the tone squelch manually push and hold sql to monitor the operating frequency 14
- While pushing sql rotate the dial to select the squelch level 14
- Basic operation 15
- D setting the backlighting condition 15
- I display backlighting 15
- I receive mode selection 15
- I general 16
- Memory channels 16
- Programming during selection 16
- I programming after selection 17
- I transferring memory contents to another memory 17
- Memory channels 17
- I memory bank selection 18
- I memory clear 18
- Memory channels 18
- I scan types 19
- Scan operation 19
- D memory bank selection 20
- I full band programmed scan 20
- I memory bank scan 20
- Scan operation 20
- I selecting scan edges 21
- Scan operation 21
- D setting the scan pause time 22
- D setting the scan resume time 22
- I scan resume condition 22
- I skip channel setting 22
- Scan operation 22
- D frequency skip function on off 23
- D programming a skip frequency 23
- I frequency skip function 23
- Scan operation 23
- I priority watch types 24
- Priority watch 24
- D memory channel watch and memory scan watch 25
- D vfo scan watch 25
- I priority watch operation 25
- Priority watch 25
- D operation 26
- D setting subaudible tones for tone squelch operation 26
- I tone squelch operation 26
- Subaudible tone operation 26
- D waiting for a call from a specific station 27
- I pocket beep operation 27
- I tone scan 27
- Subaudible tone operation 27
- D duplex shift direction 28
- D offset frequency 28
- Duplex operation 28
- D expanded set mode on off 29
- D set mode items 29
- I set mode 29
- Other functions 29
- D setting dial select step 30
- I beep tones 30
- I dial select step 30
- I power saver 30
- Other functions 30
- I auto power off function 31
- I monitor switch action 31
- Other functions 31
- I dial speed acceleration 32
- I lock function effect 32
- Other functions 32
- I channel indication mode 33
- I cloning function 33
- Other functions 33
- Caution 34
- I all reset 34
- I partial reset 34
- Other functions 34
- If your receiver seems to be malfunctioning please check the following points before sending it to a service center 35
- Problem possible cause solution ref 35
- Troubleshooting 35
- Bank scan set mode p 16 36
- Operation flow chart 36
- Scan edge set mode p 17 36
- Tuning step set mode p 7 36
- Vfo mode memory mode 36
- Operation flow chart 37
- Set mode expanded set mode 37
- D general 38
- D receiver 38
- Specifications and options 38
- D options 39
- Specifications and options 39
- 9 16 kamihigashi hirano ku osaka 547 0002 japan 40
- Count on us 40
Похожие устройства
- Siemens KG39EAW30R Инструкция по эксплуатации
- Asko C9555 A42002023 RU WHITE FS 50 Инструкция по эксплуатации
- Icom IC-R2500 Инструкция по эксплуатации
- Bosch KGE39AI20R Инструкция по эксплуатации
- Asko C9560 A42002018 RU WHITE FS 50 Инструкция по эксплуатации
- Icom IC-R3 Инструкция по эксплуатации
- Asko C958 A559C62A RU WHITE FS 60 Инструкция по эксплуатации
- Icom IC-R5 Инструкция по эксплуатации
- Electrolux EN3481AOX Инструкция по эксплуатации
- Asko C9620 A42002019 RU WHITE FS 60 Инструкция по эксплуатации
- Liebherr WTes 1753-23 Инструкция по эксплуатации
- Icom IC-R5 Sport Инструкция по эксплуатации
- Asko C9650 A42002020 RU WHITE Инструкция по эксплуатации
- Siemens KG49NAI22R Инструкция по эксплуатации
- Icom IC-R10 Инструкция по эксплуатации
- Asko C9670 A42002021 RU WHITE FS 60 Инструкция по эксплуатации
- Asko C9680 A42002005 RU WHITE FS 60 Инструкция по эксплуатации
- Hotpoint-Ariston ECFD 2013 SHL Инструкция по эксплуатации
- Icom IC-RX7 Инструкция по эксплуатации
- Asko CC9540W A42002033 RU WHITE FS 50 Инструкция по эксплуатации