Omron MIT Elite Plus [34/352] Troubleshooting

Omron MIT Elite Plus [34/352] Troubleshooting
34
6.Handling Errors and Problems
6.2 Troubleshooting
Problem Cause Remedy
The reading is
extremely low (or high).
Arm cuff not applied
correctly.
Apply the arm cuff
correctly.
Refer to section 3.2.
Movement or talking
during measurement.
Remain still and do not
talk during
measurement.
Refer to section 3.3.
Clothing is interfering
with the arm cuff.
Remove any clothing
interfering with the arm
cuff.
Refer to section 3.1.
Arm cuff pressure does
not rise.
Is the air jack securely
inserted into the main
unit?
Make sure that the air
jack is connected
securely.
Refer to section 3.2.
Air is leaking from the
arm cuff.
Replace the arm cuff
with a new one.
Refer to Chapter 8.
Arm cuff deflates too
soon.
The arm cuff is loose.
Apply the cuff correctly
so that it is firmly
wrapped around the
arm.
Refer to section 3.2.
Cannot measure or
readings are too high.
Is the cuff wrapped
correctly around the
arm?
Attach the arm cuff
correctly.
The cuff pressure does
not rise although the
pump motor can be
heard.
Check that the air plug
is properly connected to
the unit. Push the air
plug firmly into the air
jack.
The unit loses power
during measurement.
The batteries are empty.
Replace the batteries
with new ones.
HEM-7301-ITKE_main.book 34 ページ 2011年11月14日 月曜日 午後2時24分

Содержание

HEM 7301 ITKEjna in book 34 2011 11 140 3 0 28524 6 Handling Errors and Problems 6 2 Troubleshooting Problem The reading is extremely low or high Arm cuff pressure does not rise Arm cuff deflates too soon Cannot measure or readings are too high The unit loses power during measurement 34 Cause Remedy Arm cuff not applied correctly Apply the arm cuff correctly Refer to section 3 2 Movement or talking during measurement Remain still and do not talk during measurement Refer to section 3 3 Clothing is interfering with the arm cuff Remove any clothing interfering with the arm cuff Refer to section 3 1 Is the air jack securely inserted into the main unit Make sure that the air jack is connected securely Refer to section 3 2 Air is leaking from the arm cuff Replace the arm cuff with a new one Refer to Chapter 8 The arm cuff is loose Apply the cuff correctly so that it is firmly wrapped around the arm Refer to section 3 2 Is the cuff wrapped correctly around the arm Attach the arm cuff correctly The cuff pressure does not rise although the pump motor can be heard Check that the air plug is properly connected to the unit Push the air plug firmly into the air jack The batteries are empty Replace the batteries with new ones

Скачать