Ariete 730 [10/70] To dispose of product correctly according to european directive 2012 19 eu please refer to and read the provided leaflet enclosed with the product

- 8 -

risks and malfunctioning.

Use only the supplied grill.35.

Pay attention whilst moving the drip tray containing oils or liquids. Empty the 36.

drawer periodically and frequently. Do not allow the drawer to fill over half.

Use the appliance only with the grill and the drip tray in the correct position.37.

Allow the appliance to cool down after each use.38.

Use the appliance only in upright position.39.

Do not try to insert too big food with force. In case of thick smoke, food may be in 40.

contact with the heating elements. This means the inserted food is too big or are

wrongly inserted into the grill. Disconnect the appliance and leave it to cool com-

pletely. Remove the grill and any excess of foods protruding from the grill. Make

sure food is centred in the grill and no side touches the heating elements.

Do not use the appliance for purposes other than the ones that it was designed 41.

for, described below in this instruction manual.

42. To dispose of product correctly according to European Directive 2012/19/

EU, please refer to and read the provided leaflet enclosed with the product.

DO NOT THROW AWAY THESE INSTRUCTIONS

APPLIANCE DESCRIPTION (Fig. 1)

A Grill with handles

B Indicator light

C Removable sides

D Grill guides

E Power on and timer dial

F Removable drip tray

ASSEMBLY

WARNING:

Before using the appliance, it is recommended to wash all removable parts that will be in

contact with food using water and common dish detergent.

- Insert the side left/right guides (D) into the appliance by rotating them a quarter of a turn to engage

the upper and lower slots to the inner heating elements (Fig. 2).

- Insert the removable sides (C) inside the appliance, between the side panels and the heating ele-

ments. Make sure the “TOP” writing of the sides is facing upwards (Fig. 3).

- Assemble the drip tray (F), making sure the metal tray is tightly coupled on the plastic support and

insert it into the appliance by sliding it forward (Fig. 4).

WARNING:

Before using the appliance, make sure all components have been properly installed.

INSTRUCTIONS FOR USE

WARNING:

When using for the first time, it is advisable to keep the appliance on for some minutes to

remove the odour of the new appliance and the fumes due to the heating element machining.