Korting OKB9113CFX Инструкция по эксплуатации онлайн [35/44] 71164

Cooking Program table

Timer

display Icon Cooking Program

OTHER PROGRAMMER FUNCTIONS

Defrost

The temperature cannot be changed and the temperature display shows “dEF”.

ETC Cleaning function (**)

This function allows easy cleaning of the oven interior. Remove the oven accessories, grid and drip pan.

Pour 0.2-0.3 liters of soapy water directly on the bottom of the oven. Select the cleaning function “Etc” and

start the cleaning function. The preset temperature in the oven is 80°C, and the cycle lasts 20 minutes. Once

the default time has passed, it is possible to clean the oven using a soft sponge (dirt is easy to remove since

it was softened during the cleaning cycle).

Warning: The oven can be very hot. Please use adequate protection.

When the cycle is finished the oven goes to End Of Cooking Mode.

Limitations to Semi-automatic and end of cooking modes

The Preheating function and Defrost function are not compatible with the following modes: semi-automatic

cooking mode and end of cooking mode. If one of these 2 cooking modes is already selected, the Preheating

and Defrost functions cannot be selected.

If one of these 2 functions is in progress, you cannot select neither the semi-automatic cooking mode nor

end of cooking mode.

Children Lock

If the key (4) is pressed for > 4 seconds, the Children Lock is activated.

The Timer display shows the symbol "╓─0 " followed by the message "On". Then the oven goes to normal

operating mode.

When the Children lock is activated, the cooking function and the temperature are not changeable. The set

cooking parameters can be viewed but not changed.

To disable the Children Lock function, press the key (4) for > 4 seconds.

Note: if the oven is turned on, it is always possible to turn it off by pressing and releasing key (4), even if

the Children Lock is active, but it cannot be turned on.