Einhell BT-AC 200/50 OF [15/120] Storage

Einhell BT-AC 200/50 OF [15/120] Storage
GB
15
We recommend that you clean the appliance
immediately after you use it.
Clean the appliance regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the appliance. Ensure that no
water can get into the interior of the appliance.
You must disconnect the hose and any spraying
tools from the compressor before cleaning. Do
not clean the compressor with water, solvents or
the like.
8.2 Condensation water
Important. To ensure a long service life of the
pressure vessel (2), drain off the condensed water by
opening the drain valve (11) each time after using.
8.3 Safety valve (10)
The safety valve has been set for the highest
permitted pressure of the pressure vessel. It is
prohibited to adjust the safety valve or remove its
seal. Actuate the safety valve from time to time to
ensure that it works when required. Pull the ring with
sufficient force until you can hear the compressed air
being released. Then release the ring again.
8.4 Cleaning the intake filter (13)
The intake filter prevents dust and dirt being drawn
in. It is essential to clean this filter after at least every
300 hours in service. A clogged intake filter will
decrease the compressor’s performance
dramatically. Remove the filter from the compressor
by unscrewing the screw on the plastic cover (J)
(Figure 6). Lift off the plastic cover (J) and remove
the intake air filter (13) underneath (Figure 7).
Carefully clean the filter by tapping and blowing it
with low pressure compressed air (aprox. 3 bar). To
assemble, proceed in reverse order.
8.5 Storage
I mportant!
Pull the mains plug out of the socket and ventilate
the appliance and all connected pneumatic tools.
Switch off the compressor and make sure that it is
secured in such a way that it cannot be started up
again by any unauthorized person.
Important!
Store the compressor only in a dry location
which is not accessible to unauthorized persons.
Always store upright, never tilted!
9. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
10. Storage
Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.
11. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
Anleitung_BT_AC_200_50_OF_SPK7:_ 26.04.2010 8:00 Uhr Seite 15

Содержание

Anleitung_BT_AC_200_50_QF_SPK7 _ 26 04 20 8 00 Uhr Seite 15 GB We recommend that you clean the appliance immediately after you use it Clean the appliance regularly with a damp cloth and some soft soap Do not use cleaning agents or solvents these may be aggressive to the plastic parts in the appliance Ensure that no water can get into the interior of the appliance You must disconnect the hose and any spraying tools from the compressor before cleaning Do not clean the compressor with water solvents or the like 9 Ordering replacement parts 8 2 Condensation water Important To ensure a long service life of the pressure vessel 2 drain off the condensed water by opening the drain valve 11 each time after using 10 Storage 8 3 Safety valve 10 The safety valve has been set for the highest permitted pressure of the pressure vessel It is prohibited to adjust the safety valve or remove its seal Actuate the safety valve from time to time to ensure that it works when required Pull the ring with sufficient force until you can hear the compressed air being released Then release the ring again 8 4 Cleaning the intake filter 13 The intake filter prevents dust and dirt being drawn in It is essential to clean this filter after at least every 300 hours in service A clogged intake filter will decrease the compressor s performance dramatically Remove the filter from the compressor by unscrewing the screw on the plastic cover J Figure 6 Lift off the plastic cover J and remove the intake air filter 13 underneath Figure 7 Carefully clean the filter by tapping and blowing it with low pressure compressed air aprox 3 bar To assemble proceed in reverse order Please quote the following data when ordering replacement parts Type of machine Article number of the machine Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www isc gmbh info Store the equipment and accessories out of children s reach in a dark and dry place at above freezing temperature The ideal storage temperature is between 5 and 30 C Store the electric tool in its original packaging 11 Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit This packaging is raw material and can therefore be reused or can be returned to the raw material system The unit and its accessories are made of various types of material such as metal and plastic Defective components must be disposed of as special waste Ask your dealer or your local council 8 5 Storage l mportant Pull the mains plug out of the socket and ventilate the appliance and all connected pneumatic tools Switch off the compressor and make sure that it is secured in such a way that it cannot be started up again by any unauthorized person Important Store the compressor only in a dry location which is not accessible to unauthorized persons Always store upright never tilted 15

Скачать