Bomann DR 977 CB [46/78] Initial operation

Special Safety Advice

• The device is equipped with a thermostat for temperature restriction, a safety

fuse and a safety lock.

• The device must not be opened during use.

• During use the device must not be tilted by more than 45° as boiling water

could be spilled together with the steam.

• Never direct the steam jet towards people, animals or electric devices (e.g. into

the oven).

• Please do not immerse the device in water or other liquids.

• When reﬁ lling, always pull the power plug from the socket.

• Do not overﬁ ll! Please do not exceed the amount of water indicated on the

measuring beaker.

• Store the device out of the reach of children.

• Please do not add anti-liming agents, solvents, alcohol or cleaning agents as

these may damage the device or have a dangerous effect.

Overview of the Controls

1 Kettle/water tank 8 Measuring beaker

2 Connection nozzle 9 Non-woven fabric attachment

3 Safety lock 10 Brush attachment

4 Steam switch 11 Angle attachment

5 Handle 12 Nozzle attachment

6 Connection cable 13 Universal cleaning attachment

7 Hose 14 Window cleaning attachment

Initial Operation

Filling up the Heating Boiler before Use!

Before the tank lock is opened the power plug must be removed

from the socket. Please make sure the device is depressurized by

pressing the steam switch.

Caution! Before unscrewing the lock (3) proceed as follows:

1. Remove the power plug from the socket.

2. Release the pressure by using the steam switch (4).

3. If the device is still warm, please wait 5 minutes before removing the

seal completely. Press the seal downwards and turn.

Caution! Danger of Injury!

Please open the safety lock (3) only when no more steam comes out

of the nozzle. Shake any residual water out of the kettle (1). Then ﬁ ll the

measuring beaker (8) and pour the water into the kettle. Use a funnel if

necessary. Re-fasten the safety lock (3).

05-DR 977 CB 46 25.01.2006, 15:48:35 Uhr