Bomann CB 947 [33/58] Operating components

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these

instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION: This refers to possible hazards to the machine or other objects.

 NOTE: This highlights tips and information.

Operating components

1 On/off switch

2 Fastening head for the dust container

3 Handle

4 Eye for the hooking of the shoulder strap (rear)

5 Vacuum nozzle

6 Eye for the hooking of the shoulder strap (front)

Supplied accessories

A Hose with crevice nozzle

B Small brush nozzle

C Shoulder straps

D Large brush nozzle

E Filter

Putting the Appliance into Operation

1. Check whether the lter is inserted correctly on the front of the device.

2. Open the vacuum with the fastener (2).

3. Close the vacuum again by inserting the ap on the front in the relevant slot.

4. Close the vacuum by locking into place the upper ap.

5. Mount the desired accessory with or without the hose on the front of the vacuum.

When using the hose make sure that the curved side is facing down.

6. Connect the device to a duly installed 230V, 50Hz protective contact socket.

To start the vacuuming, press only the On/Off (I/O) switch.

Since the device has a removable and washable lter, there is no need to buy spare

dust bags.

05-CB 947.indd 33 17.11.2009 15:55:19 Uhr