![Bomann GSPE 771.1 [20/31] If the appliance must be moved try to keep it in the vertical position if absolutely necessary it can be positioned on its back](/img/pdf.png)
Bomann GSPE 771.1 [20/31] If the appliance must be moved try to keep it in the vertical position if absolutely necessary it can be positioned on its back
![Bomann GSPE 771.1 [20/31] If the appliance must be moved try to keep it in the vertical position if absolutely necessary it can be positioned on its back](/views2/1081031/page20/bg14.png)
It is recommend that you run a wash cycle with the
dishwasher empty and the n remove the plug from the
socket, turn off the water supp ly and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cau se odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the exterior and rubber p arts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a clo th with warm soapy water.
To remove spots o r stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, o r a cleaning pro duct made specifically for
dishw ashers.
After Every Wash
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
When not in Use for a LongTime
The installation of the pipes
and electrical equipments
should be done by p rofessionals.
Electrical Shock Hazard
Disconnect electrical power
before
installing dishwasher.
Failure to do so can result in
death or electrical shock.
The installation position of dishwasher sho uld be near the existi ng inlet and drain hoses and
power cord.
One side of the ca binet sink should be chosen to facilitate the connectio n of drai n hoses of
the dishwasher.
Installation preparation
Note: please check the accompanying installation accessories(hook for aesthetic panel,screw)
ʎ
Содержание
- For detailed operating method read the corresponding content on the instruction manual 2
- If there is no salt warning light in the control panel for some models you can estimate when to fill the salt into the softener by the number of cycles the dishwasher has run 2
- Attention before or after loading the dishwasher baskets 3
- B loading the salt into the softener 3
- Caring for the dishwasher 6 3
- Change the programme 4 3
- Cutlery basket 2 3
- D function of detergent 3
- Dear customer 3
- Error codes 5 3
- Filtering system 5 3
- Keep it to refer to it at a later date 3
- Loading the lower 0 basket 3
- Pass it on to any subsequent owner of the appliance 3
- Please carefully read this manual before using the dishwasher it will help you to use and maintain the dishwasher properly 3
- The manufacturer following a policy of constant development and updating of the product may make modifications without giving prior notice 3
- This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other residential type environments bed and breakfast type environments 3
- This manual contains sections on safety instructions operating instructions installation instructions and troubleshooting tips etc 3
- To review the section on troubleshooting tips will help you to solve some common problems by yourself 3
- Turning on the appliance 4 3
- Wash cycle table 3 3
- During installation the power supply must not be excessively or dangerously bent or flattened 4
- Improper connection of the equipment grounding conductor can result in the risk of an electric shock check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded do not modify the plug provided with the appliance if it does not fit the outlet have a proper outlet installed by a qualified electrician 4
- Use only detergent and rinse additives designed for an automatic dishwasher never use soap laundry detergent or hand washing detergent in your dishwasher keep these products out of the reach of children 4
- When using your dishwasher follow the precautions listed below 4
- Add 1 kg dishwasher salt and then full fill the salt container with water 7
- Always use the salt intended for use with dishwasher the salt container is located beneath the lower basket and should be filled as explained in the following 8
- Attention 8
- Function of rinse aid 8
- Only use salt specifically designed for the use in dishwashers every other type of salt not specifically designed for the use in a dishwasher especially table salt will damage the water softener in case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any damages caused only fill with salt just before starting one of the complete washing programs this will prevent any grains of salt or salty water which may have been spilled remaining on the bottom of the machine for any period of time which may cause corrosion 8
- Rinse aid dispenser 8
- The salt container must only be refilled when the salt warning light in the control panel comes on depending on how well the salt dissolves the salt warning light may still be on even though the salt container is filled if there is no salt warning light in the control panel for some models you can estimate when to fill the salt into the softener by the cycles that the dishwasher has run 2 if there are spills of the salt a soak or a rapid program should be run to remove the excessive salt 8
- Adjusting rinse aid dispenser 9
- Detergents 9
- If there is no rinse aid warning light in the control panel you can estimate the amount from the colour of the optical level indicator c located next to the cap when the rinse aid container is full the whole indicator will be dark as the rinse aid diminishes the size of the dark dot decreases you should never let the rinse aid level fall 1 4 full 9
- Proper use of detergent 9
- When to refill the rinse aid dispenser 9
- Amount of detergent to use 10
- Concentrated detergent 10
- Detergent dispenser 10
- Detergent tablets 10
- Fill in detergent 11
- Are not suitable are of limited suitability 12
- Adjusting the upper basket 15
- Folding spikes of lower basket 15
- En 50242 this programme is the test cycle the information for comparability test in accordance with en 50242 as follows 16
- Express 16
- For heaviest soiled crockery and normally soiled pots pans dishes etc with dried on soiling 16
- For lightly soiled crockery and glass 16
- For lightly soiled loads that do not need excellent drying efficiency 16
- G 95 0 0 16 16
- Means need to fill rinse into the rinse aid dispenser 16
- Multi tab 16
- Pre wash wash 40 rinse rinse 60 drying 16
- Rinse rinse 50 drying 16
- Standard daily cycle for normally soiled loads such as pots plates glasses 16
- Open the door carefully 17
- Open the door then turn off the appliances using the on off button shut off the water supply and keep the dishwasher door open 17
- Switch off the dishwasher 17
- Unloading the dishwasher 17
- Filter assembly 18
- Cleaning the door 19
- Cleaning the filter 19
- Cleaning the spray arms 19
- It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings to remove the spray arms screw off the nut clockwise to take out the washer on top of the spray arm and remove the arm wash the arms in soapy and warm water and use a soft brush to clean the jets replace them after rinsing them thoroughly 19
- Protect against freezing 19
- Remarks 19
- The entire filter assembly should be cleaned once a week 19
- When cleaning the filters don t knock on them otherwise the filters could be contorted and the performance of the dishwasher could be decreased 19
- After every wash 20
- If the appliance must be moved try to keep it in the vertical position if absolutely necessary it can be positioned on its back 20
- Installation preparation 20
- Moving the appliance 20
- No solvents or abrasive cleaning 20
- Remove the plug 20
- When not in use for a longtime 20
- Figure1 21
- Figure2 21
- Figure3 21
- The aesthetic panel could be processed according to the figure 3 21
- Unit mm 21
- Figure4a 22
- Connection of drain hoses 23
- Figure5 23
- Tension adjustment of the door spring 23
- Dishwasher installation steps 24
- Figure 7 24
- Dishwasher must be level for proper dish rack operation and wash performance 25
- Figure 8 25
- Illustration of feet adjustment 25
- Level the dishwasher by adjusting the four leveling legs individually 25
- Note the maximum adjustment height of the feet is 60 mm 25
- Place level on door and rack track inside the tub as shown to check that the dishwasher is level 25
- Warning 25
- When level the dishwasher please pay attention not to let the dishwasher tip over 25
- A hose that attaches to a sink spray can burst if it is installed on the same water line as the dishwasher if your sink has one it is recommended that the hose be disconnected and the hole plugged 26
- Connect the cold water supply hose to a threaded 3 4 inch connector and make sure that it is fastened tightly in place if the water pipes are new or have not been used for an extended period of time let the water run to make sure that the water is clear and free of impurities if this precaution is not taken there is a risk that the water inlet can get blocked and damage the appliance 26
- Extension hose 26
- How to drain excess water from hoses 26
- Positioning the appliance 26
- Syphon connection 26
- The safety supply hose consists of the double walls the hose s system guarantees its intervention by blocking the flow of water in case of the supply hose breaking and when the air space between the supply hose itself and the outer corrugated hose is full of water 26
- Water outlet 26
- Use only the special dishwasher detergent to avoid suds if this occurs open the dishwasher and let suds evaporate add 1 gallon of cold water to the tub close and latch the dishwasher then select any cycle dishwasher will drain out the water at the first step open the door after draining is stop and check if the suds is disappeared repeat if necessary 28
- If overflow occurs turn off the main water supply before calling a service if there is water in the base pan because of an overfill or small leak the water should be removed before restarting the dishwasher 29
- When some malfunctions come on the appliance will display error codes to warn you 29
- Technical data sheet 31
Похожие устройства
- Bosch GID 14A50 Инструкция по эксплуатации
- Apple MC97616GH1RS/A Инструкция по эксплуатации
- Hitachi DH28PD Инструкция по эксплуатации
- Bosch SRV 33A13 Инструкция по эксплуатации
- Hitachi DH30PC2 Инструкция по эксплуатации
- Indesit DSG 573 Инструкция по эксплуатации
- Hitachi DH22PG Инструкция по эксплуатации
- Asus Transformer Pad TF300TG (1G091A) 32Gb 3G Dock Red Инструкция по эксплуатации
- Indesit WIL 82 Инструкция по эксплуатации
- Hitachi DH22PH Инструкция по эксплуатации
- Asus TF700T-1I015A 64Gb Gold Инструкция по эксплуатации
- Hitachi DH24PB3 Инструкция по эксплуатации
- Hitachi DH24PC3 Инструкция по эксплуатации
- Hitachi DH24PD3 Инструкция по эксплуатации
- Hitachi DH28PC Инструкция по эксплуатации
- Hitachi DH38MS Инструкция по эксплуатации
- Hitachi DH40MR Инструкция по эксплуатации
- Olympus E-PM2 1442 Black/Black Инструкция по эксплуатации
- Ariston ARTL 837 Инструкция по эксплуатации
- Hitachi DH40MRY Инструкция по эксплуатации