Hitachi DS18DVC [8/72] English

Hitachi DS18DVC [8/72] English
8
English
b) Use power tools only with speci cally
designated battery packs.
Use of any other battery packs may create a risk of
injury and re.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may cause
burns or a
re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause irritation
or burns.
6) Service
a) Have your power tool serviced by a quali ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep
children and in rm persons away.
When not in use, tools should be stored out of reach
of children and in rm persons.
PRECAUTIONS FOR CORDLESS DRIVER DRILL
1. Always charge the battery at a temperature of 10 –
40°C. A temperature of less than 10°C will result in
over charging which is dangerous. The battery cannot
be charged at a temperature higher than 40°C.
The most suitable temperature for charging is that of
20 – 25°C.
2. When one charging is completed, leave the charger for
about 15 minutes before the next charging of battery.
Do not charge more than two batteries consecutively.
3. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
4. Never disassemble the rechargeable battery and
charger.
5. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric current
and overheat. It results in burn or damage to the
battery.
6. Do not dispose of the battery in re.
If the battery is burnt, it may explode.
7. When drilling in wall, oor or ceiling, check for buried
electric power cord, etc.
8. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose of
the exhausted battery.
9. Using an exhausted battery will damage the charger.
10. Do not insert object into the air ventilation slots of the
charger.
Inserting metal objects or in ammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
11. When mounting a bit into the keyless chuck, tighten the
sleeve adequately. If the sleeve is not tight, the bit may
slip or fall out, causing injury.
SPECIFICATIONS
POWER TOOL
Model DS14DVC DS18DVC
No-load speed (Low/High) 0 – 450 / 0 – 1250 min
–1
0 – 450 / 0 – 1250 min
–1
Capacity
Drilling
Wood
(Thickness 18 mm)
30 mm 38 mm
Metal
(Thickness 1.6 mm)
Steel: 12 mm Steel: 13 mm
Driving
Machine screw 6 mm 6 mm
Wood screw
6.2 mm (diameter) × 63 mm (length)
(Requires a pilot hole)
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
Rechargeable battery
BCC1412: Ni-Cd 14.4 V (1.2 Ah 12 cells) BCC1812: Ni-Cd 18 V (1.2 Ah 15 cells)
Weight 1.7 kg 1.9 kg
CHARGER
Model UC18YK
Charging voltage 7.2 – 18 V
Weight 0.35 kg
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
DS14DVC
DS18DVC
1 Plus driver bit (No. 2 × 65L) ..................1
2 Charger (UC18YK) ................................ 1
3 Battery .................................................. 2
or
Battery ..................................................3
(3SSK)
4 Plastic case .......................................... 1
Standard accessories are subject to change without
notice.
000Book_DS14DVC_EE.indb 8000Book_DS14DVC_EE.indb 8 2009/11/16 17:46:002009/11/16 17:46:00

Содержание

Скачать