Home
Главная
Brayer
Кофеварка
BR1105
Инструкция по эксплуатации Страница: 10

Brayer BR1105 [10/62] Making cappuccino

• Make co󰀨ee, as described in the chapter «MAKING

ESPRESSO», in the cup with enough capacity to add

frothed milk.

• Make sure that the steam control knob (9) « »

is in the position «the steam supply is o󰀨 «•».

• Press the steam supply button (19) «

» and

wait until the button (19) «

» illumination glows

constantly. Place any suitable bowl under the tip (12)

for water. Carefully turn the steam supply knob (9)

« » counterclockwise for a quarter of a turn to

remove the condensed uid from the cappuccinator

pipe (10).

• After removing the condensed uid close the steam

supply by turning the knob (9) « » clockwise

until bumping «•».

Note: some water or steam may appear from the lter

holder (5), it is normal.

• Put the cappuccinator pipe tip (12) into a glass with

cold milk or cream, the amount of milk or cream

should be about 100 ml. Carefully turn the steam

supply control knob (9) «

» counterclockwise for

a quarter of a turn or more. The tip (12) should not

touch the bottom of the glass, as this can hinder the

steam release; you can make thick frothed milk in

several seconds.

Note:

- to avoid splashing milk always immerse the tip

(12) deeper than 1 cm from the milk surface.

- to avoid splashing milk or cream, do not open the

steam supply with a sharp turn of the knob (9) «

», always turn the knob (9) « » carefully.

- when selecting a cup for milk or cream, keep

in mind that the frothed milk amount increases

approximately twice;

- during the operation in the steam supply mode

the button (19) «

» illumination will be ashing

and glowing constantly; it means that the water

temperature in the boiler is maintained within the

set limits;

• The outgoing steam creates whirls which froths milk;

from time to time lift and lower the bowl with milk

against the tip (12) to make the milk foam.

• Making the milk foam is an art. You may not make it

at the rst try, don’t worry and experiment until you

espresso machine is preheated and the buttons (18,

19, 20) indicators glow constantly.

• After the preheating is nished, press and hold

simultaneously the buttons (19) «

» and (20) «

» for 3 seconds, the buttons (19 and 20) illumination

will ash 3 times, and the espresso machine will

return to the factory settings.

MAKING CAPPUCCINO

ATTENTION!

Be careful to avoid burns by the released hot steam.

Brayer BR1105 [10/62] Making cappuccino

Содержание

Похожие устройства