Home
Главная
Brayer
Кофеварка
BR1105
Инструкция по эксплуатации Страница: 13

Brayer BR1105 [13/62] Removing mineral scale

will light up, and the illumination of buttons (18,

19, 20) will be ashing. When the buttons (18, 19,

20) illumination will glow constantly, it means that

preheating is nished.

9. Press the button (20) «

», depending on the

preset water supply time, press the button (20) «

» once or twice, ll a cup of approximately 100

ml capacity with water (it is necessary to remove

water from the boiler and ll it with citric acid

solution), if necessary, switch the water supply o󰀨

by pressing the button (20) «

» again. Pour the

liquid out from the cup.

10. Switch the water supply on by pressing the button

(20) «

» and ll a cup of about 100 ml capacity,

press the button (20) «

» again to switch the

water supply o󰀨 and pour the liquid out of the cup.

11. After a while repeat the procedure described in

the paragraph 10 and ll the cup of about 100 ml

capacity again.

12. Press the steam supply button (19) «

». Put a

suitable bowl under the tip (12) and slightly open

the steam supply by turning the knob (9) « »

counterclockwise. Carefully turn the knob (9) «

» to the maximal steam release position,

release the steam for about 1 minute, then close

the steam by turning the knob (9) « »

clockwise until bumping «•».

13. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (17) «

»,. Wait for 10-15 minutes.

Note: some water or steam may appear from the lter

holder (5), it is normal.

REMOVING MINERAL SCALE

For e󰀨ective operation of the co󰀨ee maker we

recommend removing scale every 2-3 months and when

using “hard” water more often.

1. Make sure that the power plug is not inserted into

the mains socket.

2. Make sure that the steam supply is closed. To

do this turn the knob (9) «

» clockwise until

bumping «•».

3. Make citric acid solution: 2 teaspoons of acid to 1

litre of water and pour the solution into the water

tank (15). Install the tank (15) back to its place.

4. Install the co󰀨ee lter (6) into the holder (5) having

preliminary matched the ledge on the lter (6) with

the groove on the holder (5) and turn the lter (6)

counter/clockwise to x the lter. Do not put ground

co󰀨ee into the lter (6).

5. Install the lter holder (5) into the co󰀨ee maker. The

holder (5) ledges should match the grooves on the

boiler «INSERT», after that turn the lter holder

handle (4) to the right until bumping «LOCK».

6. Place a suitable cup on the grid (2).

7. Insert the power plug into the mains socket.

8. Switch the espresso machine on by pressing the

on/o󰀨 button (17) «

», the button (17) illumination

Brayer BR1105 [13/62] Removing mineral scale

Содержание

Похожие устройства