Karcher K 3.00 S [15/224] Caution

Karcher K 3.00 S [15/224] Caution
- 5
Pull on the lever of the trigger gun; the de-
vice will switch on.
Note: Release the lever of the trigger gun; the
device will switch off again. High pressure re-
mains in the system.
Carrying out the most common cleaning
tasks. The work pressure can be stagelessly
regulated between "Min" and "Max".
Release the lever on the trigger gun.
Turn the spray lance to the desired posi-
tion.
Note: Suitable for working with detergent; for
this, turn the spray lance to the "Mix" position.
For particularly dirty items or areas.
Caution
Car tyres, paint or sensitive surfaces such as
wood should not be cleaned with the dirt blast-
er, as there is a risk of damage.
Not suitable for use with detergents.
Caution
Please make sure that the washing brush is
free from dirt or other particles. Otherwise, it
may damage the paint work.
Suitable for use with detergents.
Please use exclusively KÄRCHER detergents
and care products to carry out the respective
cleaning task, as these were specifically de-
velopped for your appliance. The use of other
detergents and care products may lead to
premature wear and can invalidate your war-
ranty claims. Please obtain information at
your local dealer or request information direct-
ly from KÄRCHER.
Notes regarding the detergent: The most
commonly use detergents can be purchased
ready to use in their detergent reservoirs with
locking lids. This will make the pesky refilling
and filling processes redundant.
Fill the detergent solution in the detergent
tank (observe dosage instructions on the
packaging of the detergent).
Use spray lance with pressure regulation
(Vario Power).
Turn the spray lance to "Mix" position.
Note: This will mix the detergent with the
water stream.
Spray the detergent sparingly on the dry
surface and allow it to react, but not to dry.
Spray off loosened dirt with the high-pres-
sure jet.
Release the lever on the trigger gun.
Lock the lever on the trigger gun.
During longer breaks (more than 5 min-
utes), also turn the appliance off using the
"0/OFF" switch.
Insert the trigger gun in its holder.
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there is
no pressure in the system.
After working with detergent, suspend de-
tergent suction hose in a container filled
with clear water, switch the appliance on
for around 1 minute once the spray lance
has been removed and rinse until water
runs clear.
Release the lever on the trigger gun.
Turn off the appliance "0/OFF".
Turn off tap.
Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.
Lock the lever on the trigger gun.
Pull out the mains plug.
Detach the appliance from the water sup-
ply.
Caution: When disconnecting the supply
or high pressure hose, warm water may
leak from the connections after operation.
Push the casing of the quick coupling for
the high pressure hose toward the rear
and disconnect the high pressure hose
from the appliance.
Insert the trigger gun in its holder.
Stow away the mains cable, the high-
pressure hose and accessory at the appli-
ance.
Spray lance with pressure regulation
Spray lance with Dirtblaster
Washing brush
Working with detergent
Recommended cleaning method
Interrupting operation
Finish operation
15EN

Содержание

Скачать